May 28 2013

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM332 6ES7 332-5HF00-0AB0 8 AO x 12 BITS

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM332  6ES7 332-5HF00-0AB0   8 AO x 12 BITS

6ES7332-5HF00-0AB0                    SIMATIC S7-300, ANALOG OUTPUT
SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 8 AO, U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS
Please find below data sheet of Siemens original 6ES7 332-5HF00-0AB0
SM 332 analog output module

-

SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 8 AO, U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS
Supply voltage
Load voltage L+
Rated value (DC) 24 V
Input current
from load voltage L+ (without load), max. 340 mA
from backplane bus 5 V DC, max. 100 mA
Power losses
Power loss, typ. 6 W
Analog outputs
Number of analog outputs 8
Voltage output, short-circuit protection Yes
Voltage output, short-circuit current, max. 25 mA
Current output, no-load voltage, max. 18 V
Output ranges, voltage
0 to 10 V Yes
1 to 5 V Yes
-10 to +10 V Yes
Output ranges, current
0 to 20 mA Yes
-20 to +20 mA Yes
4 to 20 mA Yes
Load impedance (in rated range of output)
with voltage outputs, min. 1 kΩ
with voltage outputs, capacitive load, max. 1 µF
with current outputs, max. 500 Ω
with current outputs, inductive load, max. 10 mH
Cable length
Cable length, shielded, max. 200 m
Analog value creation
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max. 12 bit; +/-10 V, +/-20 mA, 4 to 20 mA, 1 to 5 V: 11 bits + sign; 0 to 10 V, 0 to 20 mA: 12 bits
Conversion time (per channel) 0.8 ms
Settling time
for resistive load 0.2 ms
for capacitive load 3.3 ms
for inductive load 0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to output area +/- 0,5 %
Current, relative to output area +/- 0,6 %
Basic error limit (operational limit at 25 °C)
Voltage, relative to output area +/- 0,4 %
Current, relative to output area +/- 0,5 %
Interrupts/diagnostics/status information
Substitute values connectable Yes; Parameterizable
Alarms
Diagnostic alarm Yes; Parameterizable
Diagnostic messages
Diagnostic information readable Yes
Diagnostics Yes
Diagnostics indication LED
Group error SF (red) Yes
Galvanic isolation
Galvanic isolation analog outputs
between the channels and the backplane bus Yes
Isolation
Isolation checked with 500 V DC
Connection method
required front connector 40-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weight
Weight, approx. 272 g
Our company have the compatible cable, named 332-5HF00-0AB0,  can replace Siemens 6ES7 332-5HF00-0AB0.You can have a look on the picture.332-5HF00-0AB0

You can get it only need USD554.60/pc.    Buy now ====> buy buttom

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Please check below discription of our compatible OEM 332-5HF00-0AB0
Model SM3328AO
Product  Description 8AO; Resolution:12bits; High-accuracy
Power consumption
·From bus current consumption 100mA
·From L+ 70mA
·Power loss 6W
Number of analog outputs 8
Load voltage+rated value 24V
Shielded cable length,Max 200m
Voltage output,Max,short circuit Current Yes
Voltage output,Short circuit current(Max) 25mA
Voltage output,Open-circuit current,Max 18V
Load impedance
·Voltage outputs,Min 1KΩ
·current outputs,Max 500Ω
Output ranges
·voltage ±10V,0~10V,1~5V
·current ±20mA,0~20mA,4~20mA
D/A resolution 12bit
conversion time(per channel) Max:0.8ms
Setting time
·Resistive loads 0.1ms
·Capacitive loads 3.3ms
·Inductive loads 0.5ms
Output cross talk >40dB
Tolerance(Over entire temperature range)
·Voltage output ±0.5%
·Current output ±0.6%
Diagnostic interrupt None
Group fault error Red LED
Isolution tested for contact
·Between channels and backplane bus Yes
·Between channels and load voltage L+ Yes
Front connector 40-pin
Dimensions(W x H x D)(mm) 40×125×120
Order Number  332-5HF00-0AB0
Any question, please feel free to contact us.

Leave a Reply