Posts Tagged 6GK1551-2AA00

Aug 19 2013

CP5512 Express Card for Siemens 6GK1551-2AA00

Introduction to 6GK1551-2AA00

COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI

 

Data sheet of 6GK1551-2AA00

Product-type designation CP 5512
     2
COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI
Transmission rate  
Transmission rate  
  • at interface 1 / in accordance with PROFIBUS
 
  • minimum
9.6 kbit/s
  • maximum
12 Mbit/s
Interfaces  
Number of electrical connections / at interface 1 / in accordance with PROFIBUS 1
Design of electrical connection / at interface 1 / in accordance with PROFIBUS 9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss  
Type of voltage DC
Supply voltage  
  • 1 / from backplane bus
3.3 V
Relative symmetrical tolerance  
  • at 3.3 V / with DC
5 %
Consumed current  
  • 1 / from backplane bus / with DC / maximum
0.52 A
Resistive loss 1.8 W
Permitted ambient conditions  
Ambient temperature  
  • during operating
5…45 °C
  • during storage
-20…+60 °C
  • during transport
-20…+60 °C
Relative humidity  
  • at 25 °C / without condensation / during operating / maximum
95 %
Protection class IP IP00
Design, dimensions and weight  
Width 86 mm
Height 5 mm
Depth 54 mm
Net weight 130 g
Product properties, functions, components / general  
Number of plug-in cards in the same design / can be plugged in / per PC station 1
Number of modules / note -
Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum 50
Software / for DP master function / required Yes, SOFTNET-PB DP
Service / as DP master  
  • DPV0
Yes
  • DPV1
No
  • DPV2
No
Number of DP slaves / on DP master / usable 64
Amount of data  
  • of the address area of the inputs / as DP master / overall
7808 byte
  • of the address area of the outputs / as DP master / overall
7808 byte
  • of the address area of the inputs / per DP slave
244 byte
  • of the address area of the outputs / per DP slave
244 byte
  • of the address area of the diagnostic data / per DP slave
244 byte
Service / as DP slave  
  • DPV0
Yes
  • DPV1
No
Amount of data  
  • of the address area of the inputs / as DP slave / overall
122 byte
  • of the address area of the outputs / as DP slave / overall
122 byte
Number of possible connections / for S7/PG communication / maximum 8
Number of configurable connections / per PC station 207
Configuration software / required NCM PC is included in scope of delivery of the required software product
Product function / Port diagnostics Yes
Standards, specifications, approvals  
Standard  
  • for EMC
2004/108/EC
  • for safety / of CSA and UL
CAN/CSA C22.2 & UL 60950-1
  • for emitted interference
EN 61000-6-3, EN 61000-6-4
  • for interference immunity
EN 61000-6-1, EN 61000-6-2
Verification of suitability  
  • CE mark
Yes
  • C-Tick
Yes

 

 

More details of CP5512E, please find in below PDF file:

Communication card CP5512 Siemens S7-200-300-400 6GK1551-2AA00

 

Our company (Kollewin Technology CO., Limited) have a new product,

named CP5512E.

It is 100% compatible with Siemens original part.

Part#: CP5512E

EX-Work Price: $475.00/pc       buy buttom

 

CP5512E_1

 

User's manual PDF of CP5512Express card 6GK1551-2AA00:

 

CP5512 Express 6GK1551-2AA00

 

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

 

Introduction to our CP5512 Express card:

Nowadays the laptops have eliminated the PCMCIA slot,but adopt the ExpressCard slot.So we especially develop the CP5512 EXPRESS for ExpressCard laptop.

ExpressCard CP5512,it’s suitable for Laptop Expresscard slot,is used to achieve PROFIBUS/MPI/PPI/FWLcommunication between PC and SIMATIC Net. Communication speed is 9.6Kbps–12Mbps.It can be also used for desktop computer after the conversion card.

Not inlcude the MPI extension cable,for MPI cable,please click this link to get: MPI Cable

The function of our CP5512 EXPRESS is the totally same as Siemens original CP5512 except they use on different laptop interfaces.It’s the isolated PROFIBUS/MPI/PPI/FWL communication card specially for laptop, use iCoupler Magnetic Coupling isolators to replace the optocoupler,with small  dimension, wide temperature range,and have anti-lightning and surging protective circuit and resumption of Overcurrent protection circuit on the RS485 interface, all use industrial IC in order to apply to wider temperature range, is used to achieve PROFIBUS/MPI/PPI/FWL communication connection between laptop and SIMATIC.

CP5512 EXPRESS also can be used on PCI-E slot of desktop computer after the PCI-E to ExpressCard converter, the function is same as Siemens CP5611,CP5621.

CP5512 EXPRESS support hot plug and plug and play. Perfect isolation circuit and interface protective circuit make you at ease to use it.

 

Communication service:                                                               

PROFIBUS-DP master station class 1 and 2
PROFIBUS-DP slave and SOFTNET-DP slave
MPI/PPI/FWL communication
S7 communication with SOFTNET-S7
S5-compatible communication (SEND/RECEIVE based on the FDL interface) with SOFTNET-D or SOFTNET-S7

 

CP5512 EXPRESS is suitable for the following version or above version softwares:
STEP7  V5.2
SOFTNET-S7  V6.1
SOFTNET-DP, SOFTNET-DP slave from V6.1
STEP 7-Micro/WIN from V3.2 SP4
ProTool®, ProTool/Pro® V6.0 SP2
NCM PC from V5.2
SIMATIC PDM V5.2 SP1

 

Technical Specification:                                                                           

Transmission rate: 9.6Kbps~12Mbps,the corresponding largest communication distance accord with PROFIBUS standard.
Interface:connect PROFIBUS/MPI/PPI,isolated 9 pin Sub-D connector.

Isolated voltage:1000VDC

Interface protection:have anti-lightning and surging protection(Ipp=100A 10/700us,4KV) on the RS485 interface.ITU-TK20/21,VDE 0433 standard. ±15KV ESD protection. Overcurrent protection with  restoration function:RS485 port can withstand up to 60V voltage caused by continuous over-current.

Standard working voltage:3.3 VDC
power:1.0W
working temperature:-20~+75℃
size:adapter:length* width * height(mm):123×68×30,cable length:  25CM
weight:150g

 

Support hardware of CP5512 EXPRESS:

It’s different from PC Adapter and PC Adapter USB, CP5512 EXPRESS supports much more hardwares,such as Siemens S7-200/300/400PLC, PPI/MPI/PROFIBUS interface of touch panel, EM277,ET200 and other hardwares with PROFIBUS/MPI/PPI/FWL interface.

It need PROFIBUS cable or MPI cable(Siemens part nr 6ES7 901-0BF00-0AA0) when CP5512 EXPRESS communicates with fieldbus devices.

 

Signal definition of CP5512 EXPRESS profibus Interface(DB9F):

 

Pin No.

Signal name

Description

Input / Output

1

NC

Unused

-

2

NC

Unused

-

3

B(RXD+/TXD+) RS485 Signal+ Input/Output

4

RTS_AS

Handshake signal

Input

5

Ground(0V) Signal Ground -

6

+5V 5V power 50mA.max. output

7

NC

Unused

-

8

A(RXD-/TXD-) RS485 Signal- Input/Output

9

RTS_PG Request Output

Shell

PE Shield -
 

 

More compatible PLC Programming cables of Siemens

 

CP5611

CP5611-A2

CP5512

CP5512EXP-NEW

PC Adapter CN-NEW

ES-ETH-PPI-NEW

ETH Adapter CN-NEW

USB/PPIM+

PC/PPI

PC/PPI+

USB/MPI+ V4.0

USB/MPI+ V2.0

PC/MPI+ including RS232 cable

PC/MPI

LOGO!USB-CABLE

LOGO!PC-CABLE

MPI extension cable

PC/TTY

 

More pictures of our compatible cables of Siemens parts :

CP5512_1 CP5611-A2_1 CP5512E_1 PC-TTY_1 0CB20-1 V6.0_1 USB-MPI V5.0_1 USB-MPI+V4.0_1 USB-MPI+V2.0_1      

 

Other compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

ES-ETH-SC09-NEW

FX-USB-AW

USB-SC09

USB-SC09-FX

SC-09+

SC-10

USB-QC30R2

FX2N-485-BD+

FX2N-485-BD

FX2N-422-BD

FX2N-232-BD

FX1N-485-BD

FX1N-422-BD

FX3U-485-BD

FX3U-422-BD

FX3U-232-BD

FX3U-USB-BD

1747-PIC

1747-UIC

1747-CP3

USB-1747-CP3 

1761-CBL-PM02

USB-1761-CBL-PM02

 

 

 

More pictures for your reference:

USB-CN226 _1 USB-CIF02_1 TSXPCX3030_1 IC690USB901_1 IC690ACC901_1 USB-1761-CBL-PM02_1 1747-PIC_1 1747-UIC_1 USB-SC09_1 USB-QC30R2 1 ES-ETH-SC09 1 USB-SC09-FX_1 FX-USB-AW 1         

 

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com
 
Aug 18 2013

CP5512 card for Siemens 6GK1551-2AA00

Introduction to 6GK1551-2AA00

COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI

 

Data sheet of 6GK1551-2AA00

 
Product-type designation CP 5512
   2
COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI
Transmission rate  
Transmission rate  
  • at interface 1 / in accordance with PROFIBUS
 
  • minimum
9.6 kbit/s
  • maximum
12 Mbit/s
Interfaces  
Number of electrical connections / at interface 1 / in accordance with PROFIBUS 1
Design of electrical connection / at interface 1 / in accordance with PROFIBUS 9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss  
Type of voltage DC
Supply voltage  
  • 1 / from backplane bus
3.3 V
Relative symmetrical tolerance  
  • at 3.3 V / with DC
5 %
Consumed current  
  • 1 / from backplane bus / with DC / maximum
0.52 A
Resistive loss 1.8 W
Permitted ambient conditions  
Ambient temperature  
  • during operating
5…45 °C
  • during storage
-20…+60 °C
  • during transport
-20…+60 °C
Relative humidity  
  • at 25 °C / without condensation / during operating / maximum
95 %
Protection class IP IP00
Design, dimensions and weight  
Width 86 mm
Height 5 mm
Depth 54 mm
Net weight 130 g
Product properties, functions, components / general  
Number of plug-in cards in the same design / can be plugged in / per PC station 1
Number of modules / note -
Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum 50
Software / for DP master function / required Yes, SOFTNET-PB DP
Service / as DP master  
  • DPV0
Yes
  • DPV1
No
  • DPV2
No
Number of DP slaves / on DP master / usable 64
Amount of data  
  • of the address area of the inputs / as DP master / overall
7808 byte
  • of the address area of the outputs / as DP master / overall
7808 byte
  • of the address area of the inputs / per DP slave
244 byte
  • of the address area of the outputs / per DP slave
244 byte
  • of the address area of the diagnostic data / per DP slave
244 byte
Service / as DP slave  
  • DPV0
Yes
  • DPV1
No
Amount of data  
  • of the address area of the inputs / as DP slave / overall
122 byte
  • of the address area of the outputs / as DP slave / overall
122 byte
Number of possible connections / for S7/PG communication / maximum 8
Number of configurable connections / per PC station 207
Configuration software / required NCM PC is included in scope of delivery of the required software product
Product function / Port diagnostics Yes
Standards, specifications, approvals  
Standard  
  • for EMC
2004/108/EC
  • for safety / of CSA and UL
CAN/CSA C22.2 & UL 60950-1
  • for emitted interference
EN 61000-6-3, EN 61000-6-4
  • for interference immunity
EN 61000-6-1, EN 61000-6-2
Verification of suitability  
  • CE mark
Yes
  • C-Tick
Yes

 

More details of CP5512, please find in below data sheet:

Communication card CP5512 Siemens S7-200-300-400 6GK1551-2AA00

 

Our company (Kollewin Technology CO., Limited) have a new product,

named CP5512.

It is 100% compatible with Siemens original part.

Part#: CP5512

EX-Work Price: $365.00/pc       buy buttom

CP5512_1

 

User's manual PDF of CP5512 6GK1551-2AA00:

CP5512 introduction 6GK1551-2AA00

 

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

 

Description of our compatible CP5512:

SIMATIC NET communication card for laptop,correspond to Siemens 6GK1551-2AA00,optoelectronic isolated,anti-lightning and surging,suitable for laptop PCMCIA 32bit CardBus slot,is used to achieve PROFIBUS/MPI/PPI/FWL communication connection between PC and SIMATIC,communication speed is 9.6Kbps~12Mbps.After switched over by the transition card,it can be used for desk computer and secondary generation ExpressCard slot laptop.CP5512 +(PCI->PCMCIA) transition card,then can be used for desk computer; CP5512 + (PCMCIA(II)->PCMCIA)transition card,then can be used for secondary generation ExpressCard slot laptop.

If you want to directly buy the CP5512 expresscard,please click this link to get: CP5512-Express
Not made by Siemens,OEM product

Not including MPI extension cable for card communication,if you also need this,please also order it:MPI Cable

 

Introduction of our CP5512:
CP5512 is the isolated PROFIBUS/MPI/PPI/FWL communication card specially for laptop, use iCoupler isolators eliminate optocoupler limitations instead of Photoelectric isolation,with small  dimension, wide temperature range,and have anti-lightning and surging protective circuit and Overcurrent protection with  restoration function on the RS485 interface, all use industrial IC in order to apply to wider temperature range, is used to achieve PROFIBUS/MPI/PPI/FWL communication connection between laptop and SIMATIC.
CP5512 insert laptop PCMCIA slot from outside. Its function and Features is the same as Siemens original CP5512(Siemens part nr 6GK1551-2AA00 ),and have the following new characters.

1. Card and RS485 adapter integrative design, small dimension, use conveniently and have anti-lightning and surging protective circuit on the RS485 interface.

2.Support hot plug, you can plug or unplug the card when the laptop is running. And card and adapter is integrated, so it’s not like original CP5512 which exist the hidden trouble that destroy the card when plug or unplug the card from the adapter with current.

3.Support common Express to PCMCIA transition card. You can use it on the Express slot laptop.

4.Support common PCI to PCMCIA transition card. You can use it on the desk computer and the function is the same as Siemens original CP5611 and CP5611 A2.
 

Communication service:
PROFIBUS-DP master station class 1 and 2
PROFIBUS-DP slave with SOFTNET-DP slave
MPI/PPI/FWL communication
S7 communication with SOFTNET-S7
S5-compatible communication (SEND/RECEIVE based on the FDL interface) with SOFTNET-DP or SOFTNET-S7

 

CP5512 can be used with: 
STEP7  V5.2
SOFTNET-S7  V6.1
SOFTNET-DP, SOFTNET-DP slave from V6.1
STEP 7-Micro/WIN from V3.2 SP4
ProTool®, ProTool/Pro® V6.0 SP2
NCM PC from V5.2
SIMATIC PDM V5.2 SP1

 

Technical Specification of CP5512:
Transmission rate: 9.6Kbps~12Mbps,the corresponding largest communication distance accord with PROFIBUS standard.
Interface:connect PROFIBUS/MPI/PPI,isolated 9 pin Sub-D connector.
Isolated voltage:1000VDC
Interface protection:have anti-lightning and surging protection(Ipp=100A 10/700us,4KV) on the RS485 interface.ITU-TK20/21,VDE 0433 standard. ±15KV ESD protection. Overcurrent protection with  restoration function:RS485 port can withstand up to 60V voltage caused by continuous over-current.
Standard working voltage:3.3 VDC
power:1.0W
working temperature:-20~+75℃
size:length* width * height(mm):130×54×5(DB9F plug height:22mm)
weight:70g

CP5512
 

Support hardware of CP5512:
It’s different from PC Adapter and PC Adapter USB, CP5512 supports much more hardwares,such as Siemens S7-200/300/400PLC, PPI/MPI/PROFIBUS interface of touch panel, EM277,ET20 and other hardwares with PROFIBUS/MPI/PPI/FWL interface.
It need PROFIBUS cable or MPI cable(Siemens part nr 6ES7 901-0BF00-0AA0) when CP5512 communicates with fieldbus devices.


 

 Signal definition of CP5512 Interface:

 

 

Pin No.  Signal name  Description  Input / Output

 

 

 

 

 

 

 

 

1

NC Unused -
2 NC Unused -
3 B(RXD+/TXD+) RS485 Signal+ Input/Output
4 RTS_AS Handshake signal Input
5 Ground(0V) Signal Ground -
6 +5V 5V Power 50mA.max. Output
7 NC Unused -
8 A(RXD-/TXD-) RS485 Signal- Input/Output
9 RTS_PG Request Output
Shell PE Shield -
 
 

More compatible PLC Programming cables of Siemens

CP5611

CP5611-A2

CP5512

CP5512EXP-NEW

PC Adapter CN-NEW

ES-ETH-PPI-NEW

ETH Adapter CN-NEW

USB/PPIM+

PC/PPI

PC/PPI+

USB/MPI+ V4.0

USB/MPI+ V2.0

PC/MPI+ including RS232 cable

PC/MPI

LOGO!USB-CABLE

LOGO!PC-CABLE

MPI extension cable

PC/TTY

 

More pictures of our compatible cables of Siemens parts :

CP5512_1 CP5611-A2_1 CP5512E_1 PC-TTY_1 0CB20-1 V6.0_1 USB-MPI V5.0_1 USB-MPI+V4.0_1 USB-MPI+V2.0_1      

 

Other compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

ES-ETH-SC09-NEW

FX-USB-AW

USB-SC09

USB-SC09-FX

SC-09+

SC-10

USB-QC30R2

FX2N-485-BD+

FX2N-485-BD

FX2N-422-BD

FX2N-232-BD

FX1N-485-BD

FX1N-422-BD

FX3U-485-BD

FX3U-422-BD

FX3U-232-BD

FX3U-USB-BD

1747-PIC

1747-UIC

1747-CP3

USB-1747-CP3 

1761-CBL-PM02

USB-1761-CBL-PM02

 

 

More pictures for your reference:

USB-CN226 _1 USB-CIF02_1 TSXPCX3030_1 IC690USB901_1 IC690ACC901_1 USB-1761-CBL-PM02_1 1747-PIC_1 1747-UIC_1 USB-SC09_1 USB-QC30R2 1 ES-ETH-SC09 1 USB-SC09-FX_1 FX-USB-AW 1         

 

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com