May 18
2013
SIEMENS SIMATIC SM7-300 DIGITAL MODULE 6ES7322-1BF01-0AA0, SM322, 8DO, 24V DC, 2A
SIEMENS SIMATIC SM7-300 DIGITAL MODULE 6ES7322-1BF01-0AA0 SM322, 8DO, 24V DC, 2A
6ES7322-1BF01-0AA0 SM322, 8DO, 24V DC, 2A
SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 8 DO, 24V DC, 2A, 1 X 20 PIN
Below is the data sheet of Siemens original product 6ES7322-1BF01-0AA0:
|
- |
SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 8 DO, 24V DC, 2A, 1 X 20 PIN
|
|
| Supply voltage | ||
| Load voltage L+ | ||
| Rated value (DC) | 24 V | |
| permissible range, lower limit (DC) | 20.4 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| Input current | ||
| from load voltage L+ (without load), max. | 60 mA | |
| from backplane bus 5 V DC, max. | 40 mA | |
| Power losses | ||
| Power loss, typ. | 6.8 W | |
| Digital outputs | ||
| Number/binary outputs | 8 | |
| Limitation of inductive shutdown voltage to | L+ (-48 V) | |
| Lamp load, max. | 10 W | |
| Load resistance range | ||
| lower limit | 12 Ω | |
| upper limit | 4 kΩ | |
| Output voltage | ||
| for signal “1″, min. | L+ (-0.8 V) | |
| Output current | ||
| for signal “1″ rated value | 2 A | |
| for signal “1″ permissible range for 0 to 40 °C, max. | 2.4 A | |
| for signal “1″ minimum load current | 5 mA | |
| for signal “0″ residual current, max. | 0.5 mA | |
| Switching frequency | ||
| with resistive load, max. | 100 Hz | |
| with inductive load, max. | 0.5 Hz | |
| on lamp load, max. | 10 Hz | |
| Aggregate current of outputs (per group) | ||
| horizontal installation | ||
| up to 40 °C, max. | 4 A | |
| up to 60 °C, max. | 4 A | |
| vertical installation | ||
| up to 40 °C, max. | 4 A | |
| Cable length | ||
| Cable length, shielded, max. | 1000 m | |
| Cable length unshielded, max. | 600 m | |
| Interrupts/diagnostics/status information | ||
| Alarms | ||
| Diagnostic alarm | No | |
| Diagnostic messages | ||
| Diagnostics | No | |
| Wire break | No | |
| Short circuit | No | |
| Fuse blown | No | |
| Missing load voltage | No | |
| Diagnostics indication LED | ||
| Rated load voltage PWR (green) | No | |
| Fuse OK FSG (green) | No | |
| Galvanic isolation | ||
| Galvanic isolation digital outputs | ||
| between the channels, in groups of | 4 | |
| between the channels and the backplane bus | Yes; Optocoupler | |
| Isolation | ||
| Isolation checked with | 500 V DC | |
| Connection method | ||
| required front connector | 20-pin | |
| Dimensions | ||
| Width | 40 mm | |
| Height | 125 mm | |
| Depth | 120 mm | |
| Weight | ||
| Weight, approx. | 190 g | |
Our company have the compatible cable, named 322-1BF01-0AA0, can replace Siemens 6ES7 322-1BF01-0AA0.You can have a look on the picture.
You can get it only need USD114.00/pc. Buy now ====> 
It’s tested before shippment.Not made by Siemens,OEM product as the replacement.
The quality is guaranteed, we have 1 year warranty for our compatible products.
Below description of our OEM 322-1BF01-0AA0 for your reference:
|
Model |
SM322 Number of digital outputs:8 |
|
Product Description
|
8DO,24V DC;Transistor;Optical isolation with high immunity |
| Power consumption | |
| ·From bus current consumption | 50mA |
| ·Power loss | 6.8W |
| Number of digital outputs | 8 |
| Cable Length (Shielded) | 1,000m |
| Cable Length (unshielded) | 600m |
| Short-circuit protection | Yes,Electronic |
| Inductive cutoff voltage | L+(-48V) |
| Lamp load Max | 10W |
| Output voltage:”1” signal | Min,L+(-0.8V) |
| Output current:”1” signal | 2A |
| Lifetime contact mechanical | / |
| Lifetime contact mechanical rated load voltage) | / |
| Sum of output currents(per group) | 4A |
| IIsolation tested for contact | |
| ·To backplane bus | Yes,Optocoupler |
| ·To per group between channels | Yes |
| Switching frequency for contacts | |
| ·Resistive loads,Max | 100Hz |
| ·Capacitive loads,Max | 0.5Hz |
| ·Lamp loads,Max | 10Hz |
| ·Mechanical load,Max | / |
| The status indicates | Green LED each channel |
| Front connector | 20-pin |
| Dimensions(W x H x D)(mm) | 40×125×120 |
| Order Number | 322-1BF01-0AA0 |
Any question, please feel free to contact.
Recent Comments