May 29
2013
SIEMENS SIMATIC 6ES7153-1AA03-0XB0 SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
SIEMENS SIMATIC 6ES7153-1AA03-0XB0 SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7153-1AA03-0XB0 ET200M, INTERFACE MODULE IM153-1
SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
Please find below data sheet of Siemens 6ES7153-1AA03-0XB0:
|
- |
SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
|
|
| General information | ||
| Vendor identification (VendorID) | 801Dh | |
| Supply voltage | ||
| 24 V DC | Yes | |
| permissible range, lower limit (DC) | 20.4 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| permissible range (ripple included), lower limit (DC) | 20.4 V | |
| permissible range (ripple included), upper limit (DC) | 28.8 V | |
| External protection for supply cables (recommendation) | not necessary | |
| Mains buffering | ||
| Mains/voltage failure stored energy time | 5 ms | |
| Input current | ||
| Current consumption, max. | 350 mA; at 24 V DC | |
| Rated value at 24 V DC | 625 mA | |
| Inrush current, typ. | 2.5 A | |
| I²t | 0.1 A²·s | |
| Output voltage | ||
| Rated value, 5 V DC | Yes | |
| Output current | ||
| for backplane bus (5 V DC), max. | 1 A | |
| Power losses | ||
| Power loss, typ. | 3 W | |
| Address area | ||
| Addressing volume | ||
| Outputs | 128 byte | |
| Inputs | 128 byte | |
| Hardware configuration | ||
| Number of modules per DP slave interface, max. | 8 | |
| Interfaces | ||
| Interface physics, RS 485 | Yes | |
| Interface physics, FOC | No | |
| PROFIBUS DP | ||
| Node addresses | 1 to 125 permitted | |
| Automatic detection of transmission speed | Yes | |
| PROFIBUS DP, output current, max. | 90 mA | |
| Transmission procedure | RS 485 | |
| Transmission rate, max. | 12 Mbit/s | |
| SYNC capability | Yes | |
| FREECE capability | Yes | |
| Direct data exchange (slave-to-slave communication) | Yes; Sender | |
| PROFIBUS DP | 9-pin sub D socket | |
| 1st interface | ||
| DP slave | ||
| GSD file | (for DPV1) SIEM801D.GSD; SI01801D.GSG | |
| Automatic baud rate search | Yes | |
| Communication functions | ||
| Bus protocol/transmission protocol | PROFIBUS DP to EN 50170 | |
| Isolation | ||
| Isolation checked with | Isolation voltage 500 V | |
| Degree and class of protection | ||
| IP20 | Yes | |
| Ambient conditions | ||
| Operating temperature | ||
| Min. | 0 °C | |
| max. | 60 °C | |
| Air pressure | ||
| Operating altitude above sea level, max. | 3000 m | |
| Dimensions | ||
| Width | 40 mm | |
| Height | 125 mm | |
| Depth | 117 mm | |
| Weight | ||
Our company have the compatible cable, named 153-1AA03-0XB0, can replace Siemens 6ES7 153-1AA03-0XB0.You can have a look on the picture.
You can get it only need USD168.00/pc. Buy now ====>
It’s tested before shippment.Not made by Siemens,OEM product as the replacement.
The quality is guaranteed, we have 1 year warranty for our compatible products.
Please find below our compatible OEM product of 153-1AA03-0XB0:
|
Model |
IM 153 PROFIBUS-DP |
|
Product Description |
·Profibus-DP interface module to connect remote I/O modules with Profibus protocol·Eight 300 expasion modules can be used each IM 153-1 |
| Modules characteristic | |
| Protocol | PROFIBUS-DP |
| Baud rate,Max | 12Mbps Automatic adapt |
| Address space, Max | 128bits input/128bits output |
| Expansion modules,Max | 8 |
| Isolation voltage | 500V |
| Work voltage | 24V DC |
| Current consumption(24V DC) | 625mA |
| Degree of protection | IP20 |
| Operating temprature | -10℃~+70℃ |
| Dimensions(W x H x D)(mm) | 40×125×120 |
| Order Number | 153-1AA03-0XB0 |
Any problem, please feel free to contact us.
Recent Comments