Profibus Connector » SIEMENS S7-300 https://www.profibus-connector.com Profibus DP, Profibus Cable, Profibus Repeater and PLC Automation Fri, 25 Oct 2013 08:50:10 +0000 en-US hourly 1 http://wordpress.org/?v=3.5.1 Siemens 6ES7153-1AA03-0XB0 Interface module https://www.profibus-connector.com/siemens-6es7153-1aa03-0xb0-interface-module/ https://www.profibus-connector.com/siemens-6es7153-1aa03-0xb0-interface-module/#comments Sun, 22 Sep 2013 05:33:28 +0000 nancy http://www.profibus-connector.com/?p=27320 Introduction to Siemens 6ES7153-1AA03-0XB0

SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES

 

Data sheet of Siemens 6ES7153-1AA03-0XB0

General information
Vendor identification (VendorID) 801Dh
Supply voltage
24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
permissible range (ripple included), lower limit (DC) 20.4 V
permissible range (ripple included), upper limit (DC) 28.8 V
External protection for supply cables (recommendation) not necessary
Mains buffering
Mains/voltage failure stored energy time 5 ms
Input current
Current consumption, max. 350 mA; at 24 V DC
Rated value at 24 V DC 625 mA
Inrush current, typ. 2.5 A
I²t 0.1 A²·s
Output voltage
Rated value, 5 V DC Yes
Output current
for backplane bus (5 V DC), max. 1 A
Power losses
Power loss, typ. 3 W
Address area
Addressing volume
Inputs 128 byte
Outputs 128 byte
Hardware configuration
Number of modules per DP slave interface, max. 8
Interfaces
Interface physics, RS 485 Yes
Interface physics, FOC No
PROFIBUS DP
Node addresses 1 to 125 permitted
Automatic detection of transmission speed Yes
PROFIBUS DP, output current, max. 90 mA
Transmission rate, max. 12 Mbit/s
Transmission procedure RS 485
SYNC capability Yes
FREECE capability Yes
Direct data exchange (slave-to-slave communication) Yes; Sender
PROFIBUS DP 9-pin sub D socket
1st interface
DP slave
GSD file (for DPV1) SIEM801D.GSD; SI01801D.GSG
Automatic baud rate search Yes
Communication functions
Bus protocol/transmission protocol PROFIBUS DP to EN 50170
Isolation
Isolation checked with Isolation voltage 500 V
Degree and class of protection
IP20 Yes
Ambient conditions
Operating temperature
Min. 0 °C
max. 60 °C
Air pressure
Operating altitude above sea level, max. 3000 m
Dimensions
Width 40 mm
Height 125 mm
Depth 117 mm
Weights
Weight, approx. 360 g

 

Our company (Kollewin Technology CO., Limited) have a new product,

named 153-1AA03-0XB0,

it is 100% compatible with Siemens original part.


Part#: 153-1AA03-0XB0

Unit price:USD168.00/pc  buy buttom
Description: S7 interface module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

153-1AA03-0XB0

Technical data sheet of our 153-1AA03-0XB0

Model

IM 153

PROFIBUS-DP

Product  Description

·Profibus-DP interface module to connect remote I/O modules with Profibus protocol

·Eight  300 expasion modules can be used each IM 153-1

 

Modules characteristic

Protocol

PROFIBUS-DP

 

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

 

More compatible Siemens S7-200/300 modules we can offer：

Model Product Description
SM7-200 DIGITAL MODULE
  6ES7221-1BH22-0XA0 EM221 16 DI 24V DC
  6ES7221-1BL22-0XA0 EM221 32 DI 24V DC
  6ES7222-1BF22-0XA0 EM222 8DO,DC 24V
  6ES7222-1HF22-0XA0   EM222 8DO,relay
  6ES7222-1BH22-0XA0 EM222 16 DO 24V DC
  6ES7222-1HH22-0XA0 EM222 16 DO RELAY
  6ES7222-1BL22-0XA0 EM222 32 DO 24V DC
  6ES7223-1HF22-0XA0 EM223 4DI/4DO,DC 24V relay
  6ES7223-1BH22-0XA0 EM223 8 DI/ 8 DO 24V DC
  6ES7223-1PH22-0XA0 EM223 8 DI 24V DC/8 DO RELAY
  6ES7223-1BL22-0XA0 EM223 16 DI/ 16 DO 24V DC
  6ES7223-1PL22-0XA0 EM223 16 DI 24V DC/ 16 DO RELAY
  6ES7223-1BF22-0XA0 4 DI/4DO，24 VDC
  6ES7221-1BF22-0XA0 8 DI,24V DC
SM7-200 ANALOG MODULE
  6ES7231-0HC22-0XA0 EM231 4 AI x 12 Bits
  6ES7231-0HF22-0XA0 EM231 8 AI x 12/11 BIT 
  6ES7231-7PC22-0XA0 EM231 4 RTD
  6ES7231-7PD22-0XA0 EM231 4 TC
  6ES7231-7PH22-0XA0 EM231 8 TC
  6ES7231-7PL22-0XA0 16AI, T/C INPUT MOD, 16BIT
  6ES7231-7PB22-0XA0 2AI, RTD INPUT MOD. 16BIT 
  6ES7232-0HB22-0XA0 EM232 2 AO x 12 Bits
  6ES7232-0HD22-0XA0 EM232 4 AO x 12 Bits
  6ES7235-0KD22-0XA0 EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
  6ES7321-1BH02-0AA0 SM321 16 DI 24 VDC
  6ES7321-1FH00-0AA0 SM321 16 DI  AC 230V
  6ES7321-1BL00-0AA0 SM321 32 DI 24 VDC
  6ES7322-1BF01-0AA0 SM322,8DO,24VDC,2A
  6ES7322-1BH01-0AA0 SM322 16 DO 24 VDC/ 0.5A
  6ES7322-1HH01-0AA0 SM322 16 DO RELAY
  6ES7322-1BL00-0AA0 SM322 32 DO 24V DC/0.5A
  6ES7323-1BL00-0AA0 SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
  6ES7331-1KF01-0AB0 SM331 8 AI x 13 Bits
  6ES7331-7KF02-0AB0 SM331 8 AI X 14 Bits
  6ES7331-7PF01-0AB0 SM331 8 AI，RTD
  6ES7331-7PF11-0AB0 SM331 8 AI，TC
  6ES7332-5HD01-0AB0 SM332 4 AO x 12 Bits
  6ES7332-5HF00-0AB0 SM 332 8 AO x 12 BITS
SIMATIC DP  IM 153 
  6ES7153-1AA03-0XB0 SIMATIC DP, INTERFACE
IM 153-1, FOR ET 200M,
FOR MAX. 8 S7-300 MODULES
  6ES7365-0BA01-0AA0 IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

 

More pictures for your reference:

3311kf01-00 3311kf01 331-1KF01 product 321-1BL00 S7-200 322-1BL00 322-1BH02 S7-300 331-7KF02-0AB0 332-5HD01-0AB0 321-1BL00 3211bl00 6ES7322-1BL00 321-1BH02-0AA0 321-1BH02-0AA0

 

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com
]]> https://www.profibus-connector.com/siemens-6es7153-1aa03-0xb0-interface-module/feed/ 0 Siemens 6ES7321-1FH00-0AA0 DIGITAL MODULE https://www.profibus-connector.com/siemens-6es7321-1fh00-0aa0-module-2/ https://www.profibus-connector.com/siemens-6es7321-1fh00-0aa0-module-2/#comments Sat, 21 Sep 2013 04:04:35 +0000 nancy http://www.profibus-connector.com/?p=27308   ↵

  ↵

  ↵Introduction to 6ES7321-1FH00-0AA0

SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED 16 DI, 120/230V AC, 1 X 20 PIN
 
 
Data sheet of Siemens 6ES7321-1FH00-0AA0
Supply voltage
Load voltage L1
Rated value (AC) 230 V; 120/230 V AC; all load voltages must have the same phase.
Input current
from backplane bus 5 V DC, max. 29 mA
Power losses
Power loss, typ. 4.9 W
Digital inputs
Number of digital inputs 16
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Number of simultaneously controllable inputs
horizontal installation
up to 40 °C, max. 16
up to 60 °C, max. 16
vertical installation
up to 40 °C, max. 16
Input voltage
Rated value, AC 230 V; 120/230 V AC
for signal "0" 0 to 40 V
for signal "1" 79 to 264 V
Frequency range 47 to 63 Hz
Input current
for signal "1", typ. 6.5 mA; (120V, 60Hz), 16mA (230V, 50Hz)
Input delay (for rated value of input voltage)
for standard inputs
Parameterizable No
at "0" to "1", min. 25 ms
at "0" to "1", max. 25 ms
Cable length
Cable length, shielded, max. 1000 m
Cable length unshielded, max. 600 m
Encoder
Connectable encoders
2-wire sensor Yes
Permissible quiescent current (2-wire sensor), max. 2 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Alarms
Alarms No
Diagnostic alarm No
Hardware interrupt No
Diagnostic messages
Diagnostic functions No
Diagnostics indication LED
Group error SF (red) No
Status indicator digital input (green) Yes
Galvanic isolation
Galvanic isolation digital inputs
between the channels No
between the channels, in groups of 4
between the channels and the backplane bus Yes; Optocoupler
Isolation
Isolation checked with 4000 VDC
Connection method
required front connector 20-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weights
Weight, approx. 240 g

 

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

 

Our company (Kollewin Technology CO., Limited) have a new product,

named 321-1FH00-0AA0,

it is 100% compatible with Siemens original part.

 

Part#: 321-1FH00-0AA0

Unit price on request, please contact me   Nancy
Description: S7-300 Digital module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

 

Here, you also need 1 piece of 20pin front connector to connect with it.

Our compatible 6ES7 392-1AJ00-0AA0 can meet your requirements.

 

6ES7 392-1AJ00-0AA0  @USD10.50/pc   buy buttom

 

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

 

More compatible Siemens S7-200/300 modules we can offer：

Model Product Description
SM7-200 DIGITAL MODULE
  6ES7221-1BH22-0XA0 EM221 16 DI 24V DC
  6ES7221-1BL22-0XA0 EM221 32 DI 24V DC
  6ES7222-1BF22-0XA0 EM222 8DO,DC 24V
  6ES7222-1HF22-0XA0   EM222 8DO,relay
  6ES7222-1BH22-0XA0 EM222 16 DO 24V DC
  6ES7222-1HH22-0XA0 EM222 16 DO RELAY
  6ES7222-1BL22-0XA0 EM222 32 DO 24V DC
  6ES7223-1HF22-0XA0 EM223 4DI/4DO,DC 24V relay
  6ES7223-1BH22-0XA0 EM223 8 DI/ 8 DO 24V DC
  6ES7223-1PH22-0XA0 EM223 8 DI 24V DC/8 DO RELAY
  6ES7223-1BL22-0XA0 EM223 16 DI/ 16 DO 24V DC
  6ES7223-1PL22-0XA0 EM223 16 DI 24V DC/ 16 DO RELAY
  6ES7223-1BF22-0XA0 4 DI/4DO，24 VDC
  6ES7221-1BF22-0XA0 8 DI,24V DC
SM7-200 ANALOG MODULE
  6ES7231-0HC22-0XA0 EM231 4 AI x 12 Bits
  6ES7231-0HF22-0XA0 EM231 8 AI x 12/11 BIT 
  6ES7231-7PC22-0XA0 EM231 4 RTD
  6ES7231-7PD22-0XA0 EM231 4 TC
  6ES7231-7PH22-0XA0 EM231 8 TC
  6ES7231-7PL22-0XA0 16AI, T/C INPUT MOD, 16BIT
  6ES7231-7PB22-0XA0 2AI, RTD INPUT MOD. 16BIT 
  6ES7232-0HB22-0XA0 EM232 2 AO x 12 Bits
  6ES7232-0HD22-0XA0 EM232 4 AO x 12 Bits
  6ES7235-0KD22-0XA0 EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
  6ES7321-1BH02-0AA0 SM321 16 DI 24 VDC
  6ES7321-1FH00-0AA0 SM321 16 DI  AC 230V
  6ES7321-1BL00-0AA0 SM321 32 DI 24 VDC
  6ES7322-1BF01-0AA0 SM322,8DO,24VDC,2A
  6ES7322-1BH01-0AA0 SM322 16 DO 24 VDC/ 0.5A
  6ES7322-1HH01-0AA0 SM322 16 DO RELAY
  6ES7322-1BL00-0AA0 SM322 32 DO 24V DC/0.5A
  6ES7323-1BL00-0AA0 SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
  6ES7331-1KF01-0AB0 SM331 8 AI x 13 Bits
  6ES7331-7KF02-0AB0 SM331 8 AI X 14 Bits
  6ES7331-7PF01-0AB0 SM331 8 AI，RTD
  6ES7331-7PF11-0AB0 SM331 8 AI，TC
  6ES7332-5HD01-0AB0 SM332 4 AO x 12 Bits
  6ES7332-5HF00-0AB0 SM 332 8 AO x 12 BITS
SIMATIC DP  IM 153 
  6ES7153-1AA03-0XB0 SIMATIC DP, INTERFACE
IM 153-1, FOR ET 200M,
FOR MAX. 8 S7-300 MODULES
  6ES7365-0BA01-0AA0 IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

 

More pictures for your reference:

3311kf01-00 3311kf01 331-1KF01 product 321-1BL00 S7-200 322-1BL00 322-1BH02 S7-300 331-7KF02-0AB0 332-5HD01-0AB0 321-1BL00 3211bl00 6ES7322-1BL00 321-1BH02-0AA0 321-1BH02-0AA0

 

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com
]]> https://www.profibus-connector.com/siemens-6es7321-1fh00-0aa0-module-2/feed/ 0 Siemens 6ES7332-5HF00-0AB0 ANALOG MODULE https://www.profibus-connector.com/siemens-6es7332-5hf00-0aa0-module/ https://www.profibus-connector.com/siemens-6es7332-5hf00-0aa0-module/#comments Fri, 20 Sep 2013 10:38:17 +0000 nancy http://www.profibus-connector.com/?p=27299   ↵

  ↵

  ↵Introduction to 6ES7332-5HF00-0AA0

SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 8 AO, U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS
 
 
Data sheet of Siemens 6ES7332-5HF00-0AA0
Supply voltage
Load voltage L+
Rated value (DC) 24 V
Input current
from load voltage L+ (without load), max. 340 mA
from backplane bus 5 V DC, max. 100 mA
Power losses
Power loss, typ. 6 W
Analog outputs
Number of analog outputs 8
Voltage output, short-circuit protection Yes
Voltage output, short-circuit current, max. 25 mA
Current output, no-load voltage, max. 18 V
Output ranges, voltage
0 to 10 V Yes
1 to 5 V Yes
-10 to +10 V Yes
Output ranges, current
0 to 20 mA Yes
-20 to +20 mA Yes
4 to 20 mA Yes
Load impedance (in rated range of output)
with voltage outputs, min. 1 kΩ
with voltage outputs, capacitive load, max. 1 µF
with current outputs, max. 500 Ω
with current outputs, inductive load, max. 10 mH
Cable length
Cable length, shielded, max. 200 m
Analog value creation
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max. 12 bit; +/-10 V, +/-20 mA, 4 to 20 mA, 1 to 5 V: 11 bits + sign; 0 to 10 V, 0 to 20 mA: 12 bits
Conversion time (per channel) 0.8 ms
Settling time
for resistive load 0.2 ms
for capacitive load 3.3 ms
for inductive load 0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to output area +/- 0,5 %
Current, relative to output area +/- 0,6 %
Basic error limit (operational limit at 25 °C)
Voltage, relative to output area +/- 0,4 %
Current, relative to output area +/- 0,5 %
Interrupts/diagnostics/status information
Substitute values connectable Yes; Parameterizable
Alarms
Diagnostic alarm Yes; Parameterizable
Diagnostic messages
Diagnostic information readable Yes
Diagnostics Yes
Diagnostics indication LED
Group error SF (red) Yes
Galvanic isolation
Galvanic isolation analog outputs
between the channels and the backplane bus Yes
Isolation
Isolation checked with 500 V DC
Connection method
required front connector 40-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weights
Weight, approx. 272 g

 

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

 

Our company (Kollewin Technology CO., Limited) have a new product,

named 332-5HF00-0AA0,

it is 100% compatible with Siemens original part.

 

Part#: 332-5HF00-0AA0

Unit price:USD554.60/pc  buy buttom
Description: S7-300 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

 

Here, you also need 1 piece of 40 pin front connector to connect with it..

Our compatible 6ES7 392-1AM00-0AA0 can meet your requirements.

 

6ES7 392-1AM00-0AA0  @USD16.90/pc   buy buttom

 

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

332-5HF00-0AB0
 
Discriptions of our compatible OEM 332-5HF00-0AA0

Model

SM332

8AO

Product  Description

8AO; Resolution:12bits; High-accuracy

Power consumption

·From bus current consumption

100mA

·From L+

70mA

·Power loss

6W

Number of analog outputs

8

Load voltage+rated value

24V

Shielded cable length,Max

200m

Voltage output,

Max,short circuit Current

Yes

Voltage output,

Short circuit current(Max)

25mA

Voltage output,

Open-circuit current,Max

18V

Load impedance

·Voltage outputs,Min

1KΩ

·current outputs,Max

500Ω

Output ranges

·voltage

±10V,0~10V,1~5V

·current

±20mA,0~20mA,4~20mA

D/A resolution

12bit

conversion time(per channel)

Max:0.8ms

Setting time

 

·Resistive loads

0.1ms

·Capacitive loads

3.3ms

·Inductive loads

0.5ms

Output cross talk

>40dB

Tolerance(Over entire temperature range)

·Voltage output

±0.5%

·Current output

±0.6%

Diagnostic interrupt

None

Group fault error

Red LED

Isolution tested for contact

·Between channels and backplane bus

Yes

·Between channels and load voltage L+

Yes

Front connector

40-pin

Dimensions(W x H x D)(mm)

40×125×120

Order Number

 332-5HF00-0AB0

 

More compatible Siemens S7-200/300 modules we can offer：

Model Product Description
SM7-200 DIGITAL MODULE
  6ES7221-1BH22-0XA0 EM221 16 DI 24V DC
  6ES7221-1BL22-0XA0 EM221 32 DI 24V DC
  6ES7222-1BF22-0XA0 EM222 8DO,DC 24V
  6ES7222-1HF22-0XA0   EM222 8DO,relay
  6ES7222-1BH22-0XA0 EM222 16 DO 24V DC
  6ES7222-1HH22-0XA0 EM222 16 DO RELAY
  6ES7222-1BL22-0XA0 EM222 32 DO 24V DC
  6ES7223-1HF22-0XA0 EM223 4DI/4DO,DC 24V relay
  6ES7223-1BH22-0XA0 EM223 8 DI/ 8 DO 24V DC
  6ES7223-1PH22-0XA0 EM223 8 DI 24V DC/8 DO RELAY
  6ES7223-1BL22-0XA0 EM223 16 DI/ 16 DO 24V DC
  6ES7223-1PL22-0XA0 EM223 16 DI 24V DC/ 16 DO RELAY
  6ES7223-1BF22-0XA0 4 DI/4DO，24 VDC
  6ES7221-1BF22-0XA0 8 DI,24V DC
SM7-200 ANALOG MODULE
  6ES7231-0HC22-0XA0 EM231 4 AI x 12 Bits
  6ES7231-0HF22-0XA0 EM231 8 AI x 12/11 BIT 
  6ES7231-7PC22-0XA0 EM231 4 RTD
  6ES7231-7PD22-0XA0 EM231 4 TC
  6ES7231-7PH22-0XA0 EM231 8 TC
  6ES7231-7PL22-0XA0 16AI, T/C INPUT MOD, 16BIT
  6ES7231-7PB22-0XA0 2AI, RTD INPUT MOD. 16BIT 
  6ES7232-0HB22-0XA0 EM232 2 AO x 12 Bits
  6ES7232-0HD22-0XA0 EM232 4 AO x 12 Bits
  6ES7235-0KD22-0XA0 EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
  6ES7321-1BH02-0AA0 SM321 16 DI 24 VDC
  6ES7321-1FH00-0AA0 SM321 16 DI  AC 230V
  6ES7321-1BL00-0AA0 SM321 32 DI 24 VDC
  6ES7322-1BF01-0AA0 SM322,8DO,24VDC,2A
  6ES7322-1BH01-0AA0 SM322 16 DO 24 VDC/ 0.5A
  6ES7322-1HH01-0AA0 SM322 16 DO RELAY
  6ES7322-1BL00-0AA0 SM322 32 DO 24V DC/0.5A
  6ES7323-1BL00-0AA0 SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
  6ES7331-1KF01-0AB0 SM331 8 AI x 13 Bits
  6ES7331-7KF02-0AB0 SM331 8 AI X 14 Bits
  6ES7331-7PF01-0AB0 SM331 8 AI，RTD
  6ES7331-7PF11-0AB0 SM331 8 AI，TC
  6ES7332-5HD01-0AB0 SM332 4 AO x 12 Bits
  6ES7332-5HF00-0AB0 SM 332 8 AO x 12 BITS
SIMATIC DP  IM 153 
  6ES7153-1AA03-0XB0 SIMATIC DP, INTERFACE
IM 153-1, FOR ET 200M,
FOR MAX. 8 S7-300 MODULES
  6ES7365-0BA01-0AA0 IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

 

More pictures for your reference:

3311kf01-00 3311kf01 331-1KF01 product 321-1BL00 S7-200 322-1BL00 322-1BH02 S7-300 331-7KF02-0AB0 332-5HD01-0AB0 321-1BL00 3211bl00 6ES7322-1BL00 321-1BH02-0AA0 321-1BH02-0AA0

 

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com
]]> https://www.profibus-connector.com/siemens-6es7332-5hf00-0aa0-module/feed/ 0 Siemens 6ES7331-7PF11-0AB0 ANALOG MODULE https://www.profibus-connector.com/siemens-6es7331-7pf11-0ab0-module/ https://www.profibus-connector.com/siemens-6es7331-7pf11-0ab0-module/#comments Thu, 19 Sep 2013 10:27:38 +0000 nancy http://www.profibus-connector.com/?p=27293   ↵

  ↵

  ↵Introduction to 6ES7331-7PF11-0AB0

SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATATED, 8 AI THERMOCOUPLE, TYPE B, E, J, K, L, N, R, S, T TXK/TXK(L) ACCORDING GOST 16 BIT, 50 MS, 1 X 40 PIN
 
 
Data sheet of Siemens 6ES7331-7PF11-0AB0
Supply voltage
Load voltage L+
Rated value (DC) 24 V
Reverse polarity protection Yes
Input current
from load voltage L+ (without load), max. 200 mA
from backplane bus 5 V DC, max. 100 mA
Power losses
Power loss, typ. 3 W
Analog inputs
Number of analog inputs 8
permissible input voltage for voltage input (destruction limit), max. 75 V; 20 V DC permanent, 75 V DC for max. 1 s (duty factor 1:20)
Input ranges
Voltage No
Current No
Thermocouple Yes
Resistance thermometer No
Resistance No
Input ranges (rated values), voltages
0 to +10 V No
1 to 5 V No
1 to 10 V No
-1 V to +1 V No
-10 V to +10 V No
-2.5 V to +2.5 V No
-250 mV to +250 mV No
-5 V to +5 V No
-50 mV to +50 mV No
-500 mV to +500 mV No
-80 mV to +80 mV No
Input ranges (rated values), currents
0 to 20 mA No
-10 to +10 mA No
-20 to +20 mA No
-3.2 to +3.2 mA No
4 to 20 mA No
Input ranges (rated values), thermoelements
Type B Yes
Type E Yes
Type J Yes
Type K Yes
Type L Yes
Type N Yes
Type R Yes
Type S Yes
Type T Yes
Type U Yes
Type TXK/TXK(L) to GOST Yes
Input ranges (rated values), resistance thermometers
Cu 10 No
Ni 100 No
Ni 1000 No
LG-Ni 1000 No
Ni 120 No
Ni 200 No
Ni 500 No
Pt 100 No
Pt 1000 No
Pt 200 No
Pt 500 No
Input ranges (rated values), resistors
0 to 150 ohms No
0 to 300 ohms No
0 to 600 ohms No
0 to 6000 ohms No
Thermocouple (TC)
for thermocouples Type B, E, J, K, L, N, R, S. T, U, C
Temperature compensation
Parameterizable Yes
internal temperature compensation Yes
external temperature compensation with compensations socket Yes
external temperature compensation with Pt100 Yes
Characteristic linearization
Parameterizable Yes
Cable length
Cable length, shielded, max. 100 m
Analog value creation
Measurement principle integrating
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max. 16 bit; Two's complement
Integration time, parameterizable Yes
Basic conversion time, ms Up to 4 channels: 10 ms per module, 5 channels upwards: 190 ms per module
Interference voltage suppression for interference frequency f1 in Hz 400 / 60 / 50 Hz
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to input area +/- 1 K
Isochronous mode
Isochronous operation (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm Yes; Parameterizable per group
Limit value alarm Yes; Parameterizable
Diagnostic messages
Diagnostic functions Yes; Parameterizable
Diagnostic information readable Yes
Diagnostics Yes
Diagnostics indication LED
Group error SF (red) Yes
Galvanic isolation
Galvanic isolation analog inputs
between the channels No
between the channels, in groups of 2
between the channels and the backplane bus Yes
Isolation
Isolation checked with 500 V DC
Connection method
required front connector 40-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weights
Weight, approx. 272 g

 

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

 

Our company (Kollewin Technology CO., Limited) have a new product,

named 331-7PF11-0AB0,

it is 100% compatible with Siemens original part.

 

Part#: 331-7PF11-0AB0

Unit price on request, please contact me: Nancy
 

Description: S7-300 ANALOG module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

 

Here, you also need 1 piece of 40 pin front connector to connect with it..

Our compatible 6ES7 392-1AM00-0AA0 can meet your requirements.

 

6ES7 392-1AM00-0AA0  @USD16.90/pc   buy buttom

 

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

331-7PF11-0AB0
 
 

 

More compatible Siemens S7-200/300 modules we can offer：

Model Product Description
SM7-200 DIGITAL MODULE
  6ES7221-1BH22-0XA0 EM221 16 DI 24V DC
  6ES7221-1BL22-0XA0 EM221 32 DI 24V DC
  6ES7222-1BF22-0XA0 EM222 8DO,DC 24V
  6ES7222-1HF22-0XA0   EM222 8DO,relay
  6ES7222-1BH22-0XA0 EM222 16 DO 24V DC
  6ES7222-1HH22-0XA0 EM222 16 DO RELAY
  6ES7222-1BL22-0XA0 EM222 32 DO 24V DC
  6ES7223-1HF22-0XA0 EM223 4DI/4DO,DC 24V relay
  6ES7223-1BH22-0XA0 EM223 8 DI/ 8 DO 24V DC
  6ES7223-1PH22-0XA0 EM223 8 DI 24V DC/8 DO RELAY
  6ES7223-1BL22-0XA0 EM223 16 DI/ 16 DO 24V DC
  6ES7223-1PL22-0XA0 EM223 16 DI 24V DC/ 16 DO RELAY
  6ES7223-1BF22-0XA0 4 DI/4DO，24 VDC
  6ES7221-1BF22-0XA0 8 DI,24V DC
SM7-200 ANALOG MODULE
  6ES7231-0HC22-0XA0 EM231 4 AI x 12 Bits
  6ES7231-0HF22-0XA0 EM231 8 AI x 12/11 BIT 
  6ES7231-7PC22-0XA0 EM231 4 RTD
  6ES7231-7PD22-0XA0 EM231 4 TC
  6ES7231-7PH22-0XA0 EM231 8 TC
  6ES7231-7PL22-0XA0 16AI, T/C INPUT MOD, 16BIT
  6ES7231-7PB22-0XA0 2AI, RTD INPUT MOD. 16BIT 
  6ES7232-0HB22-0XA0 EM232 2 AO x 12 Bits
  6ES7232-0HD22-0XA0 EM232 4 AO x 12 Bits
  6ES7235-0KD22-0XA0 EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
  6ES7321-1BH02-0AA0 SM321 16 DI 24 VDC
  6ES7321-1FH00-0AA0 SM321 16 DI  AC 230V
  6ES7321-1BL00-0AA0 SM321 32 DI 24 VDC
  6ES7322-1BF01-0AA0 SM322,8DO,24VDC,2A
  6ES7322-1BH01-0AA0 SM322 16 DO 24 VDC/ 0.5A
  6ES7322-1HH01-0AA0 SM322 16 DO RELAY
  6ES7322-1BL00-0AA0 SM322 32 DO 24V DC/0.5A
  6ES7323-1BL00-0AA0 SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
  6ES7331-1KF01-0AB0 SM331 8 AI x 13 Bits
  6ES7331-7KF02-0AB0 SM331 8 AI X 14 Bits
  6ES7331-7PF01-0AB0 SM331 8 AI，RTD
  6ES7331-7PF11-0AB0 SM331 8 AI，TC
  6ES7332-5HD01-0AB0 SM332 4 AO x 12 Bits
  6ES7332-5HF00-0AB0 SM 332 8 AO x 12 BITS
SIMATIC DP  IM 153 
  6ES7153-1AA03-0XB0 SIMATIC DP, INTERFACE
IM 153-1, FOR ET 200M,
FOR MAX. 8 S7-300 MODULES
  6ES7365-0BA01-0AA0 IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

 

More pictures for your reference:

3311kf01-00 3311kf01 331-1KF01 product 321-1BL00 S7-200 322-1BL00 322-1BH02 S7-300 331-7KF02-0AB0 332-5HD01-0AB0 321-1BL00 3211bl00 6ES7322-1BL00 321-1BH02-0AA0 321-1BH02-0AA0

 

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com
]]> https://www.profibus-connector.com/siemens-6es7331-7pf11-0ab0-module/feed/ 0 Siemens 6ES7331-7PF01-0AB0 ANANLOG MODULE https://www.profibus-connector.com/siemens-6es7331-7pf01-0aa0-module/ https://www.profibus-connector.com/siemens-6es7331-7pf01-0aa0-module/#comments Wed, 18 Sep 2013 10:22:13 +0000 nancy http://www.profibus-connector.com/?p=27290   ↵

  ↵

  ↵

  ↵Introduction to 6ES7331-7PF01-0AA0

SIMATIC S7-300, ANALOG INPUT SM 331, OPT. ISOL.,2/3/4 WIRE, 8AI, RESISTANCE, PT100/200/1000 NI100/120/200/500/1000, CU10, PLUS CHARACTERISTICS ACCORDING TO GOST STANDARD 16 (INTERN 24) BIT, 50MS, 1 X 40 PIN
 
 
Data sheet of Siemens 6ES7331-7PF01-0AA0
Supply voltage
Load voltage L+
Rated value (DC) 24 V
Reverse polarity protection Yes
Input current
from load voltage L+ (without load), max. 240 mA
from backplane bus 5 V DC, max. 100 mA
Power losses
Power loss, typ. 4.6 W
Analog inputs
Number of analog inputs 8
Number of analog inputs for resistance measurement 8
permissible input voltage for voltage input (destruction limit), max. 75 V; 35 V continuous, 75 V for max. 1 s (mark to space ratio 1:20)
Input ranges
Voltage No
Current No
Thermocouple No
Resistance thermometer Yes
Resistance Yes
Input ranges (rated values), voltages
0 to +10 V No
1 to 5 V No
1 to 10 V No
-1 V to +1 V No
-10 V to +10 V No
-2.5 V to +2.5 V No
-250 mV to +250 mV No
-5 V to +5 V No
-50 mV to +50 mV No
-500 mV to +500 mV No
-80 mV to +80 mV No
Input ranges (rated values), currents
0 to 20 mA No
-10 to +10 mA No
-20 to +20 mA No
-3.2 to +3.2 mA No
4 to 20 mA No
Input ranges (rated values), thermoelements
Type B No
Type E No
Type J No
Type K No
Type L No
Type N No
Type R No
Type S No
Type T No
Type U No
Type TXK/TXK(L) to GOST No
Input ranges (rated values), resistance thermometers
Cu 10 Yes
Ni 100 Yes
Ni 1000 Yes
LG-Ni 1000 Yes
Ni 120 Yes
Ni 200 Yes
Ni 500 Yes
Pt 100 Yes
Pt 1000 Yes
Pt 200 Yes
Pt 500 Yes
Input ranges (rated values), resistors
0 to 150 ohms Yes
0 to 300 ohms Yes
0 to 600 ohms Yes
Resistance thermometer (RTD)
Characteristic linearization
for resistance thermometer Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni200, Ni500, Ni1000, Cu10; (standard/climate)
Characteristic linearization
Parameterizable Yes
Cable length
Cable length, shielded, max. 200 m
Analog value creation
Measurement principle integrating
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max. 16 bit; Two's complement
Integration time, parameterizable Yes
Basic conversion time, ms up to 4 channels: 10 ms per module, over 5 channels: 190 ms per module, 8 channels: 80 ms
Interference voltage suppression for interference frequency f1 in Hz 400 / 60 / 50 Hz
Encoder
Connection of signal encoders
for resistance measurement with 2-conductor connection Yes; without resistance correction
for resistance measurement with 3-conductor connection Yes
for resistance measurement with 4-conductor connection Yes
Errors/accuracies
Operational limit in overall temperature range
Impedance, relative to input area +/- 0,1 %
Resistance-type thermometer, relative to input area +/- 1 K
Basic error limit (operational limit at 25 °C)
Impedance, relative to input area +/- 0,05 %
Resistance-type thermometer, relative to input area +/- 0.5 K
Isochronous mode
Isochronous operation (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm Yes; Parameterizable per group
Limit value alarm Yes; Parameterizable
Diagnostic messages
Diagnostic functions Yes; Parameterizable
Diagnostic information readable Yes
Diagnostics Yes
Diagnostics indication LED
Group error SF (red) Yes
Galvanic isolation
Galvanic isolation analog inputs
between the channels No
between the channels, in groups of 2
between the channels and the backplane bus Yes
Isolation
Isolation checked with 500 V DC
Connection method
required front connector 40-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weights
Weight, approx. 272 g

 

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

 

Our company (Kollewin Technology CO., Limited) have a new product,

named 331-7PF01-0AA0,

it is 100% compatible with Siemens original part.

 

Part#: 331-7PF01-0AA0

Unit price:USD440.00/pc  buy buttom
Description: S7-300 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

 

Here, you also need 1 piece of 40 pin front connector to connect with it..

Our compatible 6ES7 392-1AM00-0AA0 can meet your requirements.

 

6ES7 392-1AM00-0AA0  @USD16.90/pc   buy buttom

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

331-7PF01-0AB0
 
Discriptions of our compatible OEM 331-7PF01-0AA0

Model

SM331

8AI RTD

Product  Description

8AI;

RTD temperature measurement modules; stable

Power consumption

·Rate value

24V DC

·From backplane bus current consumption

50mA

·From L+

40mA

·Power loss

1W

The power of transmitter

 

·Supply current

/

·short-circuit protection

/

Number of analog inputs

8

Cable Length (Shielded)

Max:200m

Input type and input range

 

·voltage

/

·current(4wire)

/

·current(2wire)

/

·tesistance

150Ω, 300Ω, 600Ω,

·thermocouple

/

·RTD

Pt10、 Pt50、Pt100, Pt200、
Pt500、 Pt1000、 Ni100、
Ni120 、Ni200,Ni500 、
Ni1000 、Cu10(9.035) 、
Cu50、Cu100

A/D resolution

16bits

Basic conversion time(per channel)

190ms

Interference frequency suppression

400/50/60Hz

Tolerance(Over entire temperature range)

·Voltage

/

·Current

/

·resistance

±0.1%

·temperature

±1℃

Interrupts

Diagnostic interrupt

Per group Yes,Configurable

Limit-value interrupt

Yes,Configurable

Isolation tested for contact

·Between channels

Yes

·Between channels and backplane bu

Yes

Front connector

40-pin

Dimensions(W x H x D)(mm)

40×125×120

Order Number

    331-7PF01-0AB0

 

More compatible Siemens S7-200/300 modules we can offer：

Model Product Description
SM7-200 DIGITAL MODULE
  6ES7221-1BH22-0XA0 EM221 16 DI 24V DC
  6ES7221-1BL22-0XA0 EM221 32 DI 24V DC
  6ES7222-1BF22-0XA0 EM222 8DO,DC 24V
  6ES7222-1HF22-0XA0   EM222 8DO,relay
  6ES7222-1BH22-0XA0 EM222 16 DO 24V DC
  6ES7222-1HH22-0XA0 EM222 16 DO RELAY
  6ES7222-1BL22-0XA0 EM222 32 DO 24V DC
  6ES7223-1HF22-0XA0 EM223 4DI/4DO,DC 24V relay
  6ES7223-1BH22-0XA0 EM223 8 DI/ 8 DO 24V DC
  6ES7223-1PH22-0XA0 EM223 8 DI 24V DC/8 DO RELAY
  6ES7223-1BL22-0XA0 EM223 16 DI/ 16 DO 24V DC
  6ES7223-1PL22-0XA0 EM223 16 DI 24V DC/ 16 DO RELAY
  6ES7223-1BF22-0XA0 4 DI/4DO，24 VDC
  6ES7221-1BF22-0XA0 8 DI,24V DC
SM7-200 ANALOG MODULE
  6ES7231-0HC22-0XA0 EM231 4 AI x 12 Bits
  6ES7231-0HF22-0XA0 EM231 8 AI x 12/11 BIT 
  6ES7231-7PC22-0XA0 EM231 4 RTD
  6ES7231-7PD22-0XA0 EM231 4 TC
  6ES7231-7PH22-0XA0 EM231 8 TC
  6ES7231-7PL22-0XA0 16AI, T/C INPUT MOD, 16BIT
  6ES7231-7PB22-0XA0 2AI, RTD INPUT MOD. 16BIT 
  6ES7232-0HB22-0XA0 EM232 2 AO x 12 Bits
  6ES7232-0HD22-0XA0 EM232 4 AO x 12 Bits
  6ES7235-0KD22-0XA0 EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
  6ES7321-1BH02-0AA0 SM321 16 DI 24 VDC
  6ES7321-1FH00-0AA0 SM321 16 DI  AC 230V
  6ES7321-1BL00-0AA0 SM321 32 DI 24 VDC
  6ES7322-1BF01-0AA0 SM322,8DO,24VDC,2A
  6ES7322-1BH01-0AA0 SM322 16 DO 24 VDC/ 0.5A
  6ES7322-1HH01-0AA0 SM322 16 DO RELAY
  6ES7322-1BL00-0AA0 SM322 32 DO 24V DC/0.5A
  6ES7323-1BL00-0AA0 SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
  6ES7331-1KF01-0AB0 SM331 8 AI x 13 Bits
  6ES7331-7KF02-0AB0 SM331 8 AI X 14 Bits
  6ES7331-7PF01-0AB0 SM331 8 AI，RTD
  6ES7331-7PF11-0AB0 SM331 8 AI，TC
  6ES7332-5HD01-0AB0 SM332 4 AO x 12 Bits
  6ES7332-5HF00-0AB0 SM 332 8 AO x 12 BITS
SIMATIC DP  IM 153 
  6ES7153-1AA03-0XB0 SIMATIC DP, INTERFACE
IM 153-1, FOR ET 200M,
FOR MAX. 8 S7-300 MODULES
  6ES7365-0BA01-0AA0 IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

 

More pictures for your reference:

3311kf01-00 3311kf01 331-1KF01 product 321-1BL00 S7-200 322-1BL00 322-1BH02 S7-300 331-7KF02-0AB0 332-5HD01-0AB0 321-1BL00 3211bl00 6ES7322-1BL00 321-1BH02-0AA0 321-1BH02-0AA0

 

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com
]]> https://www.profibus-connector.com/siemens-6es7331-7pf01-0aa0-module/feed/ 0 Siemens 6ES7322-1HH01-0AA0 DIGITAL MODULE https://www.profibus-connector.com/siemens-6es7322-1hh01-0aa0-module/ https://www.profibus-connector.com/siemens-6es7322-1hh01-0aa0-module/#comments Tue, 17 Sep 2013 10:13:27 +0000 nancy http://www.profibus-connector.com/?p=27282   ↵

  ↵

  ↵Introduction to 6ES7322-1HH01-0AA0

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED 16DO, RELAY CONTACTS, 1 X 20 PIN
 
 
Data sheet of Siemens 6ES7322-1HH01-0AA0
Supply voltage
Load voltage L+
Rated value (DC) 120 V
Load voltage L1
Rated value (AC) 230 V
Input current
from backplane bus 5 V DC, max. 100 mA
Power losses
Power loss, typ. 4.5 W
Digital outputs
Number of digital outputs 16
Switching capacity of the outputs
Lamp load, max. 50 W; 230 V AC
Output current
for signal "1" rated value 2 A
for signal "1" minimum load current 10 mA
Switching frequency
with resistive load, max. 1 Hz
with inductive load, max. 0.5 Hz
on lamp load, max. 1 Hz
mechanical, max. 10 Hz
Aggregate current of outputs (per group)
horizontal installation
up to 60 °C, max. 8 A
vertical installation
up to 40 °C, max. 8 A
Relay outputs
Rated input voltage of relay coil L+ (DC) 24 V
Number of operating cycles, max. 100000; 50000 (24 V DC, at 2 A); 700000 (120 V AC, at 2 A); 100000 (230 V AC, at 2 A)
Switching capacity of contacts
with inductive load, max. 2 A; 2 A (230 V AC), 2 A (24 V DC)
with resistive load, max. 2 A; 2 A (230 V AC), 2 A (24 V DC)
Cable length
Cable length, shielded, max. 1000 m
Cable length unshielded, max. 600 m
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm No
Diagnostic messages
Diagnostics No
Wire break No
Short circuit No
Fuse blown No
Missing load voltage No
Diagnostics indication LED
Rated load voltage PWR (green) No
Fuse OK FSG (green) No
Galvanic isolation
Galvanic isolation digital outputs
between the channels, in groups of 8
between the channels and the backplane bus Yes; Optocoupler
Isolation
Isolation checked with 1500 V AC
Connection method
required front connector 20-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weights
Weight, approx. 250 g

 

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

 

Our company (Kollewin Technology CO., Limited) have a new product,

named 322-1HH01-0AA0,

it is 100% compatible with Siemens original part.

 

Part#: 322-1HH01-0AA0

Unit price:USD197.00/pc  buy buttom
Description: S7-300 Digital module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

322-1HH01-0AA0

Here, you also need 1 piece of 20pin front connector to connect with it.

Our compatible 6ES7 392-1AJ00-0AA0 can meet your requirements.

 

6ES7 392-1AJ00-0AA0  @USD10.50/pc   buy buttom

 

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

 
 
Discriptions of our compatible OEM 322-1HH01-0AA0

Model

SM322

Number of digital outputs:16

Product  Description

16DO,24V DC;Relay;

Optical isolation with high immunity

Power consumption

 

·From  bus current consumption

100mA

·Power loss

4.5W

Number of digital outputs

16, Relay

Cable Length (Shielded)

1,000m

Cable Length (unshielded)

600m

Short-circuit protection

/

Inductive cutoff voltage

/

Lamp load Max

200W

Output voltage:”1” signal

/

Output current:”1” signal

2A

Lifetime contact mechanical

1,000,000

Lifetime contact  mechanical  rated load voltage)

100,000

Sum of output currents(per group)

8A

IIsolation tested for contact

·To backplane bus

Yes,Optocoupler

·To per group between channels

Yes

Switching frequency for contacts

·Resistive loads,Max

1Hz

·Capacitive loads,Max

0.5Hz

·Lamp loads,Max

1Hz

·Mechanical load,Max

10Hz

The status indicates

Green LED each channel

Front connector

20-pin

Dimensions(W x H x D)(mm)

40×125×120

Order Number

    322-1HH01-0AA0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

More compatible Siemens S7-200/300 modules we can offer：

Model Product Description
SM7-200 DIGITAL MODULE
  6ES7221-1BH22-0XA0 EM221 16 DI 24V DC
  6ES7221-1BL22-0XA0 EM221 32 DI 24V DC
  6ES7222-1BF22-0XA0 EM222 8DO,DC 24V
  6ES7222-1HF22-0XA0   EM222 8DO,relay
  6ES7222-1BH22-0XA0 EM222 16 DO 24V DC
  6ES7222-1HH22-0XA0 EM222 16 DO RELAY
  6ES7222-1BL22-0XA0 EM222 32 DO 24V DC
  6ES7223-1HF22-0XA0 EM223 4DI/4DO,DC 24V relay
  6ES7223-1BH22-0XA0 EM223 8 DI/ 8 DO 24V DC
  6ES7223-1PH22-0XA0 EM223 8 DI 24V DC/8 DO RELAY
  6ES7223-1BL22-0XA0 EM223 16 DI/ 16 DO 24V DC
  6ES7223-1PL22-0XA0 EM223 16 DI 24V DC/ 16 DO RELAY
  6ES7223-1BF22-0XA0 4 DI/4DO，24 VDC
  6ES7221-1BF22-0XA0 8 DI,24V DC
SM7-200 ANALOG MODULE
  6ES7231-0HC22-0XA0 EM231 4 AI x 12 Bits
  6ES7231-0HF22-0XA0 EM231 8 AI x 12/11 BIT 
  6ES7231-7PC22-0XA0 EM231 4 RTD
  6ES7231-7PD22-0XA0 EM231 4 TC
  6ES7231-7PH22-0XA0 EM231 8 TC
  6ES7231-7PL22-0XA0 16AI, T/C INPUT MOD, 16BIT
  6ES7231-7PB22-0XA0 2AI, RTD INPUT MOD. 16BIT 
  6ES7232-0HB22-0XA0 EM232 2 AO x 12 Bits
  6ES7232-0HD22-0XA0 EM232 4 AO x 12 Bits
  6ES7235-0KD22-0XA0 EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
  6ES7321-1BH02-0AA0 SM321 16 DI 24 VDC
  6ES7321-1FH00-0AA0 SM321 16 DI  AC 230V
  6ES7321-1BL00-0AA0 SM321 32 DI 24 VDC
  6ES7322-1BF01-0AA0 SM322,8DO,24VDC,2A
  6ES7322-1BH01-0AA0 SM322 16 DO 24 VDC/ 0.5A
  6ES7322-1HH01-0AA0 SM322 16 DO RELAY
  6ES7322-1BL00-0AA0 SM322 32 DO 24V DC/0.5A
  6ES7323-1BL00-0AA0 SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
  6ES7331-1KF01-0AB0 SM331 8 AI x 13 Bits
  6ES7331-7KF02-0AB0 SM331 8 AI X 14 Bits
  6ES7331-7PF01-0AB0 SM331 8 AI，RTD
  6ES7331-7PF11-0AB0 SM331 8 AI，TC
  6ES7332-5HD01-0AB0 SM332 4 AO x 12 Bits
  6ES7332-5HF00-0AB0 SM 332 8 AO x 12 BITS
SIMATIC DP  IM 153 
  6ES7153-1AA03-0XB0 SIMATIC DP, INTERFACE
IM 153-1, FOR ET 200M,
FOR MAX. 8 S7-300 MODULES
  6ES7365-0BA01-0AA0 IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

 

More pictures for your reference:

3311kf01-00 3311kf01 331-1KF01 product 321-1BL00 S7-200 322-1BL00 322-1BH02 S7-300 331-7KF02-0AB0 332-5HD01-0AB0 321-1BL00 3211bl00 6ES7322-1BL00 321-1BH02-0AA0 321-1BH02-0AA0

 

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com
]]> https://www.profibus-connector.com/siemens-6es7322-1hh01-0aa0-module/feed/ 0 Siemens 6ES7322-1BH01-0AA0 DIGITAL MODULE https://www.profibus-connector.com/siemens-6es7322-1bh01-0aa0-module/ https://www.profibus-connector.com/siemens-6es7322-1bh01-0aa0-module/#comments Mon, 16 Sep 2013 10:05:21 +0000 nancy http://www.profibus-connector.com/?p=27274   ↵

  ↵

  ↵

  ↵Introduction to 6ES7322-1BH01-0AA0

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 16 DO, 24V DC, 0.5A, 1 X 20 PIN SUM OF OUTPUT CURRENTS 4A/GROUP (8A/MODULE)
 
 
Data sheet of Siemens 6ES7322-1BH01-0AA0
Supply voltage
Load voltage L+
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Input current
from load voltage L+ (without load), max. 80 mA
from backplane bus 5 V DC, max. 80 mA
Power losses
Power loss, typ. 4.9 W
Digital outputs
Number of digital outputs 16
Limitation of inductive shutdown voltage to L+ (-53 V)
Switching capacity of the outputs
Lamp load, max. 5 W
Load resistance range
lower limit 48 Ω
upper limit 4 kΩ
Output voltage
for signal "1", min. L+ (-0.8 V)
Output current
for signal "1" rated value 0.5 A
for signal "1" permissible range for 0 to 40 °C, max. 0.6 A
for signal "1" minimum load current 5 mA
for signal "0" residual current, max. 0.5 mA
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 0.5 Hz
on lamp load, max. 10 Hz
Aggregate current of outputs (per group)
horizontal installation
up to 40 °C, max. 4 A
up to 60 °C, max. 3 A
vertical installation
up to 40 °C, max. 2 A
Cable length
Cable length, shielded, max. 1000 m
Cable length unshielded, max. 600 m
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm No
Diagnostic messages
Diagnostics No
Wire break No
Short circuit No
Fuse blown No
Missing load voltage No
Diagnostics indication LED
Rated load voltage PWR (green) No
Fuse OK FSG (green) No
Galvanic isolation
Galvanic isolation digital outputs
between the channels, in groups of 8
between the channels and the backplane bus Yes; Optocoupler
Isolation
Isolation checked with 500 V DC
Connection method
required front connector 20-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weights
Weight, approx.

190 g

 

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

 

Our company (Kollewin Technology CO., Limited) have a new product,

named 322-1BH01-0AA0,

it is 100% compatible with Siemens original part.

 

Part#: 322-1BH01-0AA0

Unit price:USD132.00/pc  buy buttom
Description: S7-300 Digital module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

 

Here, you also need 1 piece of 20pin front connector to connect with it.

Our compatible 6ES7 392-1AJ00-0AA0 can meet your requirements.

 

6ES7 392-1AJ00-0AA0  @USD10.50/pc   buy buttom

 

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

322-1BH01-0AA0
 
Discriptions of our compatible OEM 322-1BH01-0AA0

Technical specifications

Power consumption

 

·From backplane bus

80mA

·Power loss

4.9W

 

Number of digital contact

16

Cable length: shielded

1,000m

Cable length: unshielded

600m

Short-circuit protection

Yes,Electronic

Inductive cutoff voltage

L+(-53V) 

 

 

Lamp load Max.

5W

Output  voltage  “1”signal

Min. L + (-0.8V)

Output  current  “1”signal

0.5A

Sum of output currents(per group)

 4A

   

 

 

Service life of contacts

 

·Mechanical

 

·At rated load voltage

 

Isolation tested for contact

 

·To backplane bus

Optocoupler

·Per group between channels

Switching Frequency of contacts  

Yes

·Resistive loads,Max

100Hz

·Capacitive loads,Max

0.5Hz

·Lamp loads,Max

10Hz

·Mechanical load,Max

 

The status indicates

Green LED each channel

Frontconnestor

20-Pin

 

Dimensions(W x H x D)(mm)

40×125×120

weight

210g

Wiring Diagram

 

More compatible Siemens S7-200/300 modules we can offer：

Model Product Description
SM7-200 DIGITAL MODULE
  6ES7221-1BH22-0XA0 EM221 16 DI 24V DC
  6ES7221-1BL22-0XA0 EM221 32 DI 24V DC
  6ES7222-1BF22-0XA0 EM222 8DO,DC 24V
  6ES7222-1HF22-0XA0   EM222 8DO,relay
  6ES7222-1BH22-0XA0 EM222 16 DO 24V DC
  6ES7222-1HH22-0XA0 EM222 16 DO RELAY
  6ES7222-1BL22-0XA0 EM222 32 DO 24V DC
  6ES7223-1HF22-0XA0 EM223 4DI/4DO,DC 24V relay
  6ES7223-1BH22-0XA0 EM223 8 DI/ 8 DO 24V DC
  6ES7223-1PH22-0XA0 EM223 8 DI 24V DC/8 DO RELAY
  6ES7223-1BL22-0XA0 EM223 16 DI/ 16 DO 24V DC
  6ES7223-1PL22-0XA0 EM223 16 DI 24V DC/ 16 DO RELAY
  6ES7223-1BF22-0XA0 4 DI/4DO，24 VDC
  6ES7221-1BF22-0XA0 8 DI,24V DC
SM7-200 ANALOG MODULE
  6ES7231-0HC22-0XA0 EM231 4 AI x 12 Bits
  6ES7231-0HF22-0XA0 EM231 8 AI x 12/11 BIT 
  6ES7231-7PC22-0XA0 EM231 4 RTD
  6ES7231-7PD22-0XA0 EM231 4 TC
  6ES7231-7PH22-0XA0 EM231 8 TC
  6ES7231-7PL22-0XA0 16AI, T/C INPUT MOD, 16BIT
  6ES7231-7PB22-0XA0 2AI, RTD INPUT MOD. 16BIT 
  6ES7232-0HB22-0XA0 EM232 2 AO x 12 Bits
  6ES7232-0HD22-0XA0 EM232 4 AO x 12 Bits
  6ES7235-0KD22-0XA0 EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
  6ES7321-1BH02-0AA0 SM321 16 DI 24 VDC
  6ES7321-1FH00-0AA0 SM321 16 DI  AC 230V
  6ES7321-1BL00-0AA0 SM321 32 DI 24 VDC
  6ES7322-1BF01-0AA0 SM322,8DO,24VDC,2A
  6ES7322-1BH01-0AA0 SM322 16 DO 24 VDC/ 0.5A
  6ES7322-1HH01-0AA0 SM322 16 DO RELAY
  6ES7322-1BL00-0AA0 SM322 32 DO 24V DC/0.5A
  6ES7323-1BL00-0AA0 SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
  6ES7331-1KF01-0AB0 SM331 8 AI x 13 Bits
  6ES7331-7KF02-0AB0 SM331 8 AI X 14 Bits
  6ES7331-7PF01-0AB0 SM331 8 AI，RTD
  6ES7331-7PF11-0AB0 SM331 8 AI，TC
  6ES7332-5HD01-0AB0 SM332 4 AO x 12 Bits
  6ES7332-5HF00-0AB0 SM 332 8 AO x 12 BITS
SIMATIC DP  IM 153 
  6ES7153-1AA03-0XB0 SIMATIC DP, INTERFACE
IM 153-1, FOR ET 200M,
FOR MAX. 8 S7-300 MODULES
  6ES7365-0BA01-0AA0 IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

 

More pictures for your reference:

3311kf01-00 3311kf01 331-1KF01 product 321-1BL00 S7-200 322-1BL00 322-1BH02 S7-300 331-7KF02-0AB0 332-5HD01-0AB0 321-1BL00 3211bl00 6ES7322-1BL00 321-1BH02-0AA0 321-1BH02-0AA0

 

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com
]]> https://www.profibus-connector.com/siemens-6es7322-1bh01-0aa0-module/feed/ 0 Siemens 6ES7322-1BF01-0AA0 DIGITAL MODULE https://www.profibus-connector.com/siemens-6es7322-1bf01module/ https://www.profibus-connector.com/siemens-6es7322-1bf01module/#comments Sun, 15 Sep 2013 07:12:59 +0000 nancy http://www.profibus-connector.com/?p=27265   ↵

  ↵Introduction to 6ES7322-1BF01-0AA0

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 8 DO, 24V DC, 2A, 1 X 20 PIN
 
 
Data sheet of Siemens 6ES7322-1BF01-0AA0
Supply voltage
Load voltage L+
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Input current
from load voltage L+ (without load), max. 60 mA
from backplane bus 5 V DC, max. 40 mA
Power losses
Power loss, typ. 6.8 W
Digital outputs
Number of digital outputs 8
Limitation of inductive shutdown voltage to L+ (-48 V)
Switching capacity of the outputs
Lamp load, max. 10 W
Load resistance range
lower limit 12 Ω
upper limit 4 kΩ
Output voltage
for signal "1", min. L+ (-0.8 V)
Output current
for signal "1" rated value 2 A
for signal "1" permissible range for 0 to 40 °C, max. 2.4 A
for signal "1" minimum load current 5 mA
for signal "0" residual current, max. 0.5 mA
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 0.5 Hz
on lamp load, max. 10 Hz
Aggregate current of outputs (per group)
horizontal installation
up to 40 °C, max. 4 A
up to 60 °C, max. 4 A
vertical installation
up to 40 °C, max. 4 A
Cable length
Cable length, shielded, max. 1000 m
Cable length unshielded, max. 600 m
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm No
Diagnostic messages
Diagnostics No
Wire break No
Short circuit No
Fuse blown No
Missing load voltage No
Diagnostics indication LED
Rated load voltage PWR (green) No
Fuse OK FSG (green) No
Galvanic isolation
Galvanic isolation digital outputs
between the channels, in groups of 4
between the channels and the backplane bus Yes; Optocoupler
Isolation
Isolation checked with 500 V DC
Connection method
required front connector 20-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weights
Weight, approx. 190 g

 

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

 

Our company (Kollewin Technology CO., Limited) have a new product,

named 322-1BF01-0AA0,

it is 100% compatible with Siemens original part.

 

Part#: 322-1BF01-0AA0

Unit price:USD114.00/pc  buy buttom
Description: S7-200 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

 

Here, you also need 1 piece of 20pin front connector to connect with it.

Our compatible 6ES7 392-1AJ00-0AA0 can meet your requirements.

 

6ES7 392-1AJ00-0AA0  @USD10.50/pc   buy buttom

 

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

322-1BF01-0AA0
 
Discriptions of our compatible OEM 322-1BF01-0AA0

Model

SM322

Number of digital outputs:8

Product  Description

 

8DO,24V DC;Transistor;

Optical isolation with high immunity

Power consumption

·From  bus current consumption

50mA

·Power loss

6.8W

Number of digital outputs

8

Cable Length (Shielded)

1,000m

Cable Length (unshielded)

600m

Short-circuit protection

Yes,Electronic

Inductive cutoff voltage

L+(-48V)

Lamp load Max

10W

Output voltage:”1” signal

Min,L+(-0.8V)

Output current:”1” signal

2A

Lifetime contact mechanical

/

Lifetime contact  mechanical  rated load voltage)

/

Sum of output currents(per group)

4A

IIsolation tested for contact

·To backplane bus

Yes,Optocoupler

·To per group between channels

Yes

Switching frequency for contacts

·Resistive loads,Max

100Hz

·Capacitive loads,Max

0.5Hz

·Lamp loads,Max

10Hz

·Mechanical load,Max

/

The status indicates

Green LED each channel

Front connector

20-pin

Dimensions(W x H x D)(mm)

40×125×120

Order Number

 322-1BF01-0AA0

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

More compatible Siemens S7-200/300 modules we can offer：

Model Product Description
SM7-200 DIGITAL MODULE
  6ES7221-1BH22-0XA0 EM221 16 DI 24V DC
  6ES7221-1BL22-0XA0 EM221 32 DI 24V DC
  6ES7222-1BF22-0XA0 EM222 8DO,DC 24V
  6ES7222-1HF22-0XA0   EM222 8DO,relay
  6ES7222-1BH22-0XA0 EM222 16 DO 24V DC
  6ES7222-1HH22-0XA0 EM222 16 DO RELAY
  6ES7222-1BL22-0XA0 EM222 32 DO 24V DC
  6ES7223-1HF22-0XA0 EM223 4DI/4DO,DC 24V relay
  6ES7223-1BH22-0XA0 EM223 8 DI/ 8 DO 24V DC
  6ES7223-1PH22-0XA0 EM223 8 DI 24V DC/8 DO RELAY
  6ES7223-1BL22-0XA0 EM223 16 DI/ 16 DO 24V DC
  6ES7223-1PL22-0XA0 EM223 16 DI 24V DC/ 16 DO RELAY
  6ES7223-1BF22-0XA0 4 DI/4DO，24 VDC
  6ES7221-1BF22-0XA0 8 DI,24V DC
SM7-200 ANALOG MODULE
  6ES7231-0HC22-0XA0 EM231 4 AI x 12 Bits
  6ES7231-0HF22-0XA0 EM231 8 AI x 12/11 BIT 
  6ES7231-7PC22-0XA0 EM231 4 RTD
  6ES7231-7PD22-0XA0 EM231 4 TC
  6ES7231-7PH22-0XA0 EM231 8 TC
  6ES7231-7PL22-0XA0 16AI, T/C INPUT MOD, 16BIT
  6ES7231-7PB22-0XA0 2AI, RTD INPUT MOD. 16BIT 
  6ES7232-0HB22-0XA0 EM232 2 AO x 12 Bits
  6ES7232-0HD22-0XA0 EM232 4 AO x 12 Bits
  6ES7235-0KD22-0XA0 EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
  6ES7321-1BH02-0AA0 SM321 16 DI 24 VDC
  6ES7321-1FH00-0AA0 SM321 16 DI  AC 230V
  6ES7321-1BL00-0AA0 SM321 32 DI 24 VDC
  6ES7322-1BF01-0AA0 SM322,8DO,24VDC,2A
  6ES7322-1BH01-0AA0 SM322 16 DO 24 VDC/ 0.5A
  6ES7322-1HH01-0AA0 SM322 16 DO RELAY
  6ES7322-1BL00-0AA0 SM322 32 DO 24V DC/0.5A
  6ES7323-1BL00-0AA0 SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
  6ES7331-1KF01-0AB0 SM331 8 AI x 13 Bits
  6ES7331-7KF02-0AB0 SM331 8 AI X 14 Bits
  6ES7331-7PF01-0AB0 SM331 8 AI，RTD
  6ES7331-7PF11-0AB0 SM331 8 AI，TC
  6ES7332-5HD01-0AB0 SM332 4 AO x 12 Bits
  6ES7332-5HF00-0AB0 SM 332 8 AO x 12 BITS
SIMATIC DP  IM 153 
  6ES7153-1AA03-0XB0 SIMATIC DP, INTERFACE
IM 153-1, FOR ET 200M,
FOR MAX. 8 S7-300 MODULES
  6ES7365-0BA01-0AA0 IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

 

More pictures for your reference:

3311kf01-00 3311kf01 331-1KF01 product 321-1BL00 S7-200 322-1BL00 322-1BH02 S7-300 331-7KF02-0AB0 332-5HD01-0AB0 321-1BL00 3211bl00 6ES7322-1BL00 321-1BH02-0AA0 321-1BH02-0AA0

 

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com
]]> https://www.profibus-connector.com/siemens-6es7322-1bf01module/feed/ 0 6ES7398-8AA10-8DN0 SIMATIC S7-300, INSTRUC https://www.profibus-connector.com/6ES7398-8AA10-8DN0-SIMATIC-S7-300-INSTRUC/ https://www.profibus-connector.com/6ES7398-8AA10-8DN0-SIMATIC-S7-300-INSTRUC/#comments Fri, 19 Apr 2013 11:17:47 +0000 Tiny http://localhost/?p=14651 SIMATIC S7-300, INSTRUCT. LIST,FOR COMPACT CPUS S7-300,,SPANISH
SIMATIC S7-300, OPERATIONSLISTE,FUER KOMPAKT-CPUS S7-300,,SPANISCH
SIMATIC S7-300, LISTE,P. CPU COMPACTES S7-300,,ESPAGNOL
SIMATIC S7-300, LISTA OPERAC.,PARA CPU COMPACTAS S7-300,,ESPANOL

]]> https://www.profibus-connector.com/6ES7398-8AA10-8DN0-SIMATIC-S7-300-INSTRUC/feed/ 0 6ES7398-8FA10-8DA0 SIMATIC S7-300, MANUAL, https://www.profibus-connector.com/6ES7398-8FA10-8DA0-SIMATIC-S7-300-MANUAL/ https://www.profibus-connector.com/6ES7398-8FA10-8DA0-SIMATIC-S7-300-MANUAL/#comments Fri, 19 Apr 2013 11:17:47 +0000 Tiny http://localhost/?p=14651 SIMATIC S7-300, MANUAL,CONFIGURATION, CPU DATA,,MODULE DATA, OPERATIONS LIST,,PAPER VERSION, SPANISH
SIMATIC S7-300, HANDBUCH,AUFBAU, CPU-DATEN, BAUGRUPPEN-,DATEN, OPERATIONSLISTE,,PAPIERVERSION, SPANISCH
SIMATIC S7-300, MANUEL,CONFIGURER, CARACT. DES CPU,,CARACT. DES MODULES, LISTE,OPERATIONS, VERSION IMPRIMEE,,ESPAGNOL
SIMATIC S7-300, MANUAL,MONTAJE, DATOS CPU, DATOS DE,MODULOS, LISTA OPERAC.,VERSION EN PAPEL, ESPANOL


Weight(Kg):5.604
Price(Euro):110.00

]]> https://www.profibus-connector.com/6ES7398-8FA10-8DA0-SIMATIC-S7-300-MANUAL/feed/ 0