Profibus Connector

SIEMENS SIMATIC SM7-200 DIGITAL MODULE 6ES7222-1BH22-0XA0 EM222 16 DO 24V DC

SIEMENS SIMATIC SM7-200 DIGITAL MODULE 6ES7222-1BH22-0XA0  EM222 16 DO 24V DC

6ES7222-1BH22-0XA0      EM222 16 DO 24V DC

Our company have the compatible cable, named 222-1BH22-0XA0,  can replace Siemens 6ES7222-1BH22-0XA0.

222-1BH22-0XA0 16DO,24V DC; Transistor; Optical isolation with high immunity

You can have a look on the picture.

You can get it only need USD79.00/pc.    Buy now ====> 

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Here, please find below discriptions of our compatible OEM product:

Any question, please feel free to contact me.

SIEMENS SIMATIC SM7-200 DIGITAL MODULE 6ES7221-1BL22-0XA0 EM221 32 DI 24V DC

SIEMENS SIMATIC SM7-200 DIGITAL MODULE  6ES7221-1BL22-0XA0  EM221 32 DI 24V DC

6ES7221-1BL22-0XA0  EM221 32 DI 24V DC

Our company have the compatible cable, named 221-1BL22-0XA0,  can replace Siemens 6ES7 221-1BL22-0XA0.

You can have a look on the picture.

You can get it only need USD97.00/pc.    Buy now ====> 

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Here, please find below discriptions of our compatible OEM product:

Please feel free to contact us for any question.

SIEMENS SIMATIC S7-200, DIGITAL INPUT 6ES7 222-1HF22-0XA0 EM222 8DO,relay

SIEMENS SIMATIC S7-200, DIGITAL INPUT 6ES7 222-1HF22-0XA0  EM222 8DO,relay

-	SIMATIC S7-200, DIGITAL OUTPUT EM 222, FOR S7-22X CPU ONLY, 8DO, (RELAY OUTPUTS) 2A
Supply voltage
Load voltage L+
Rated value (DC)	24 V
permissible range, lower limit (DC)	5 V
permissible range, upper limit (DC)	30 V
Load voltage L1
Rated value (AC)	24 V; 24 to 230 V AC
permissible range, lower limit (AC)	5 V
permissible range, upper limit (AC)	250 V
permissible frequency range, lower limit	47 Hz
permissible frequency range, upper limit	63 Hz
Input current
from backplane bus 5 V DC, max.	40 mA
Digital outputs
from load voltage L+, max.	72 mA; 9 mA per switched output
Power losses
Power loss, typ.	2 W
Digital outputs
Number/binary outputs	8; Relay
Functionality/short-circuit strength	No; to be provided externally (see manual package “Setting up an S7-200″)
Limitation of inductive shutdown voltage to	to be provided externally (see manual package “Setting up an S7-200″)
Output current
for signal “1″ permissible range for 0 to 40 °C, max.	2 A
for signal “1″ permissible range for 0 to 55 °C, max.	2 A
for signal “0″ residual current, max.	0 mA
Aggregate current of outputs (per group)
all mounting positions
up to 40 °C, max.	8 A
maximum current per conductor/group	8 A
horizontal installation
up to 55 °C, max.	8 A
Relay outputs
Number of operating cycles, max.	10000000; mechanically 10 million, at rated load voltage 100,000
Switching capacity of contacts
with inductive load, max.	2 A
on lamp load, max.	200 W
Switching frequency/contacts/at ohmic load/maximum	2 A
Cable length
Cable length, shielded, max.	500 m
Cable length unshielded, max.	150 m
Galvanic isolation
Galvanic isolation digital outputs
Galvanic isolation digital outputs	Yes; Relay
between the channels, in groups of	4
Connection method
Plug-in I/O terminals	Yes
Dimensions
Width	45 mm
Height	80 mm
Depth	62 mm
Weight
Weight, approx.	170 g

Our company have the compatible cable, named 222-1HF22-0XA0,  can replace Siemens 6ES7 222-1HF22-0XA0.

You can have a look on the picture.

You can get it only need USD57.00/pc.    Buy now ====> 

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Here, please find below discriptions of our compatible OEM product:

Please contact us for any problem.

SIEMENS SIMATIC S7-200, DIGITAL INPUT 6ES7 222-1BF22-0XA0 EM221 32 DI 24V DC

SIEMENS SIMATIC S7-200, DIGITAL INPUT 6ES7 222-1BF22-0XA0  EM221 32 DI 24V DC

-	SIMATIC S7-200, DIGITAL OUTPUT EM 222, FOR S7-22X CPU ONLY, 8DQ, 24 V DC,
Supply voltage
Load voltage L+
Rated value (DC)	24 V
permissible range, lower limit (DC)	20.4 V
permissible range, upper limit (DC)	28.8 V
Input current
from backplane bus 5 V DC, max.	50 mA
Power losses
Power loss, typ.	2 W
Digital outputs
Number/binary outputs	8
Functionality/short-circuit strength	No; to be provided externally (see manual package “Setting up an S7-200″)
Limitation of inductive shutdown voltage to	L+ (-48 V)
Output voltage
for signal “1″, min.	20 V
Output current
for signal “1″ permissible range for 0 to 40 °C, max.	750 mA
for signal “1″ permissible range for 0 to 55 °C, max.	750 mA
for signal “0″ residual current, max.	10 µA
Parallel switching of 2 outputs
for increased power	Yes
Aggregate current of outputs (per group)
all mounting positions
up to 40 °C, max.	3 A
maximum current per conductor/group	3 A
horizontal installation
up to 55 °C, max.	3 A
Relay outputs
Switching capacity of contacts
with inductive load, max.	0.75 A
on lamp load, max.	5 W
Switching frequency/contacts/at ohmic load/maximum	0.75 A
Cable length
Cable length, shielded, max.	500 m
Cable length unshielded, max.	150 m
Galvanic isolation
Galvanic isolation digital outputs
Galvanic isolation digital outputs	Yes; Optocoupler
between the channels, in groups of	4
Connection method
Plug-in I/O terminals	Yes
Dimensions
Width	45 mm
Height	80 mm
Depth	62 mm
Weight
Weight, approx.	150 g

SIEMENS SIMATIC S7-200, DIGITAL INPUT 6ES7221-1BH22-0XA0 EM221 16 DI 24V DC

-	SIMATIC S7-200, DIGITAL INPUT EM 221, FOR S7-22X CPU ONLY, 16DI, 24V DC, SINK/SOURCE INPUT
Input current
from backplane bus 5 V DC, max.	70 mA
Power losses
Power loss, typ.	3 W
Digital inputs
Number/binary inputs	16
m/p-reading	Yes
Input characteristic curve acc. to IEC 61131, Type 1	Yes
Input voltage
Type of input voltage	DC
Rated value, DC	24 V
for signal “0″	0 to 5 V
for signal “1″	15 to 30 V
Input current
for signal “1″, typ.	4 mA
Input delay (for rated value of input voltage)
for standard inputs
at “0″ to “1″, max.	4.5 ms
Cable length
Cable length, shielded, max.	500 m
Cable length unshielded, max.	300 m
Encoder
Connectable encoders
2-wire sensor	Yes
Permissible quiescent current (2-wire sensor), max.	1 mA
Galvanic isolation
Galvanic isolation digital inputs
Galvanic isolation digital inputs	Yes; Optocoupler
between the channels, in groups of	4
Isolation
Isolation checked with	500 V AC for 1 min.
Connection method
Plug-in I/O terminals	Yes
Dimensions
Width	71.2 mm
Height	80 mm
Depth	62 mm
Weight
Weight, approx.	160 g

SIEMENS SIMATIC 6ES7153-1AA03-0XB0 SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES

SIEMENS SIMATIC 6ES7153-1AA03-0XB0  SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES

-	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
General information
Vendor identification (VendorID)	801Dh
Supply voltage
24 V DC	Yes
permissible range, lower limit (DC)	20.4 V
permissible range, upper limit (DC)	28.8 V
permissible range (ripple included), lower limit (DC)	20.4 V
permissible range (ripple included), upper limit (DC)	28.8 V
External protection for supply cables (recommendation)	not necessary
Mains buffering
Mains/voltage failure stored energy time	5 ms
Input current
Current consumption, max.	350 mA; at 24 V DC
Rated value at 24 V DC	625 mA
Inrush current, typ.	2.5 A
I²t	0.1 A²·s
Output voltage
Rated value, 5 V DC	Yes
Output current
for backplane bus (5 V DC), max.	1 A
Power losses
Power loss, typ.	3 W
Address area
Addressing volume
Outputs	128 byte
Inputs	128 byte
Hardware configuration
Number of modules per DP slave interface, max.	8
Interfaces
Interface physics, RS 485	Yes
Interface physics, FOC	No
PROFIBUS DP
Node addresses	1 to 125 permitted
Automatic detection of transmission speed	Yes
PROFIBUS DP, output current, max.	90 mA
Transmission procedure	RS 485
Transmission rate, max.	12 Mbit/s
SYNC capability	Yes
FREECE capability	Yes
Direct data exchange (slave-to-slave communication)	Yes; Sender
PROFIBUS DP	9-pin sub D socket
1st interface
DP slave
GSD file	(for DPV1) SIEM801D.GSD; SI01801D.GSG
Automatic baud rate search	Yes
Communication functions
Bus protocol/transmission protocol	PROFIBUS DP to EN 50170
Isolation
Isolation checked with	Isolation voltage 500 V
Degree and class of protection
IP20	Yes
Ambient conditions
Operating temperature
Min.	0 °C
max.	60 °C
Air pressure
Operating altitude above sea level, max.	3000 m
Dimensions
Width	40 mm
Height	125 mm
Depth	117 mm
Weight

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM332 6ES7 332-5HF00-0AB0 8 AO x 12 BITS

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM332  6ES7 332-5HF00-0AB0   8 AO x 12 BITS

-	SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 8 AO, U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS
Supply voltage
Load voltage L+
Rated value (DC)	24 V
Input current
from load voltage L+ (without load), max.	340 mA
from backplane bus 5 V DC, max.	100 mA
Power losses
Power loss, typ.	6 W
Analog outputs
Number of analog outputs	8
Voltage output, short-circuit protection	Yes
Voltage output, short-circuit current, max.	25 mA
Current output, no-load voltage, max.	18 V
Output ranges, voltage
0 to 10 V	Yes
1 to 5 V	Yes
-10 to +10 V	Yes
Output ranges, current
0 to 20 mA	Yes
-20 to +20 mA	Yes
4 to 20 mA	Yes
Load impedance (in rated range of output)
with voltage outputs, min.	1 kΩ
with voltage outputs, capacitive load, max.	1 µF
with current outputs, max.	500 Ω
with current outputs, inductive load, max.	10 mH
Cable length
Cable length, shielded, max.	200 m
Analog value creation
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	12 bit; +/-10 V, +/-20 mA, 4 to 20 mA, 1 to 5 V: 11 bits + sign; 0 to 10 V, 0 to 20 mA: 12 bits
Conversion time (per channel)	0.8 ms
Settling time
for resistive load	0.2 ms
for capacitive load	3.3 ms
for inductive load	0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to output area	+/- 0,5 %
Current, relative to output area	+/- 0,6 %
Basic error limit (operational limit at 25 °C)
Voltage, relative to output area	+/- 0,4 %
Current, relative to output area	+/- 0,5 %
Interrupts/diagnostics/status information
Substitute values connectable	Yes; Parameterizable
Alarms
Diagnostic alarm	Yes; Parameterizable
Diagnostic messages
Diagnostic information readable	Yes
Diagnostics	Yes
Diagnostics indication LED
Group error SF (red)	Yes
Galvanic isolation
Galvanic isolation analog outputs
between the channels and the backplane bus	Yes
Isolation
Isolation checked with	500 V DC
Connection method
required front connector	40-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weight
Weight, approx.	272 g

Our company have the compatible cable, named 332-5HF00-0AB0,  can replace Siemens 6ES7 332-5HF00-0AB0.You can have a look on the picture.

You can get it only need USD554.60/pc.    Buy now ====>

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM332 6ES7 332-5HD01-0AB0 4 AO x 12 Bits

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM332  6ES7 332-5HD01-0AB0   4 AO x 12 Bits

-	SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 4 AO, U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS, 20 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS
Supply voltage
Load voltage L+
Rated value (DC)	24 V
Input current
from load voltage L+ (without load), max.	240 mA
from backplane bus 5 V DC, max.	60 mA
Power losses
Power loss, typ.	3 W
Analog outputs
Number of analog outputs	4
Voltage output, short-circuit protection	Yes
Voltage output, short-circuit current, max.	25 mA
Current output, no-load voltage, max.	18 V
Output ranges, voltage
0 to 10 V	Yes
1 to 5 V	Yes
-10 to +10 V	Yes
Output ranges, current
0 to 20 mA	Yes
-20 to +20 mA	Yes
4 to 20 mA	Yes
Load impedance (in rated range of output)
with voltage outputs, min.	1 kΩ
with voltage outputs, capacitive load, max.	1 µF
with current outputs, max.	500 Ω
with current outputs, inductive load, max.	10 mH
Cable length
Cable length, shielded, max.	200 m
Analog value creation
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	12 bit; +/-10 V, +/-20 mA, 4 to 20 mA, 1 to 5 V: 11 bits + sign; 0 to 10 V, 0 to 20 mA: 12 bits
Conversion time (per channel)	0.8 ms
Settling time
for resistive load	0.2 ms
for capacitive load	3.3 ms
for inductive load	0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to output area	+/- 0,5 %
Current, relative to output area	+/- 0,6 %
Basic error limit (operational limit at 25 °C)
Voltage, relative to output area	+/- 0,4 %
Current, relative to output area	+/- 0,5 %
Interrupts/diagnostics/status information
Substitute values connectable	Yes; Parameterizable
Alarms
Diagnostic alarm	Yes; Parameterizable
Diagnostic messages
Diagnostic information readable	Yes
Diagnostics	Yes
Diagnostics indication LED
Group error SF (red)	Yes
Galvanic isolation
Galvanic isolation analog outputs
between the channels and the backplane bus	Yes
Isolation
Isolation checked with	500 V DC
Connection method
required front connector	20-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weight
Weight, approx.	220 g

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM331 6ES7331-7PF11-0AB0 8 AI，TC

-	SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATATED, 8 AI THERMOCOUPLE, TYPE B, E, J, K, L, N, R, S, T TXK/TXK(L) ACCORDING GOST 16 BIT, 50 MS, 1 X 40 PIN
Supply voltage
Load voltage L+
Rated value (DC)	24 V
Reverse polarity protection	Yes
Input current
from load voltage L+ (without load), max.	200 mA
from backplane bus 5 V DC, max.	100 mA
Power losses
Power loss, typ.	3 W
Analog inputs
Number of analog inputs	8
permissible input voltage for voltage input (destruction limit), max.	75 V; 20 V DC permanent, 75 V DC for max. 1 s (duty factor 1:20)
Input ranges
Voltage	No
Current	No
Thermocouple	Yes
Resistance thermometer	No
Resistance	No
Input ranges (rated values), voltages
0 to +10 V	No
1 to 5 V	No
1 to 10 V	No
-1 V to +1 V	No
-10 V to +10 V	No
-2.5 V to +2.5 V	No
-250 mV to +250 mV	No
-5 V to +5 V	No
-50 mV to +50 mV	No
-500 mV to +500 mV	No
-80 mV to +80 mV	No
Input ranges (rated values), currents
0 to 20 mA	No
-10 to +10 mA	No
-20 to +20 mA	No
-3.2 to +3.2 mA	No
4 to 20 mA	No
Input ranges (rated values), thermoelements
Type B	Yes
Type E	Yes
Type J	Yes
Type K	Yes
Type L	Yes
Type N	Yes
Type R	Yes
Type S	Yes
Type T	Yes
Type U	Yes
Type TXK/TXK(L) to GOST	Yes
Input ranges (rated values), resistance thermometers
Cu 10	No
Ni 100	No
Ni 1000	No
LG-Ni 1000	No
Ni 120	No
Ni 200	No
Ni 500	No
Pt 100	No
Pt 1000	No
Pt 200	No
Pt 500	No
Input ranges (rated values), resistors
0 to 150 ohms	No
0 to 300 ohms	No
0 to 600 ohms	No
0 to 6000 ohms	No
Thermocouple (TC)
for thermocouples	Type B, E, J, K, L, N, R, S. T, U, C
Temperature compensation
Parameterizable	Yes
internal temperature compensation	Yes
external temperature compensation with compensations socket	Yes
external temperature compensation with Pt100	Yes
Characteristic linearization
Parameterizable	Yes
Cable length
Cable length, shielded, max.	100 m
Analog value creation
Measurement principle	integrating
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	16 bit; Two’s complement
Integration time, parameterizable	Yes
Basic conversion time, ms	Up to 4 channels: 10 ms per module, 5 channels upwards: 190 ms per module
Interference voltage suppression for interference frequency f1 in Hz	400 / 60 / 50 Hz
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to input area	+/- 1 K
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm	Yes; Parameterizable per group
Limit value alarm	Yes; Parameterizable
Diagnostic messages
Diagnostic functions	Yes; Parameterizable
Diagnostic information readable	Yes
Diagnostics	Yes
Diagnostics indication LED
Group error SF (red)	Yes
Galvanic isolation
Galvanic isolation analog inputs
between the channels	No
between the channels, in groups of	2
between the channels and the backplane bus	Yes
Isolation
Isolation checked with	500 V DC
Connection method
required front connector	40-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weight
Weight, approx.	272 g

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM331 6ES7331-7PF01-0AB0 8 AI，RTD