May 26
2013
SIEMENS SIMATIC SM7-300 ANALOG MODULE SM331 6ES7331-7PF11-0AB0 8 AI，TC
SIEMENS SIMATIC SM7-300 ANALOG MODULE SM331 6ES7331-7PF11-0AB0 8 AI，TC
6ES7331-7PF11-0AB0 SIMATIC S7-300, ANALOG INPUT
SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATATED, 8 AI THERMOCOUPLE, TYPE B, E, J, K, L, N, R, S, T TXK/TXK(L) ACCORDING GOST 16 BIT, 50 MS, 1 X 40 PIN
Please find below data sheet of Siemens original 6ES7331-7PF11-0AB0 :
|
- |
SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATATED, 8 AI THERMOCOUPLE, TYPE B, E, J, K, L, N, R, S, T TXK/TXK(L) ACCORDING GOST 16 BIT, 50 MS, 1 X 40 PIN
|
|
| Supply voltage | ||
| Load voltage L+ | ||
| Rated value (DC) | 24 V | |
| Reverse polarity protection | Yes | |
| Input current | ||
| from load voltage L+ (without load), max. | 200 mA | |
| from backplane bus 5 V DC, max. | 100 mA | |
| Power losses | ||
| Power loss, typ. | 3 W | |
| Analog inputs | ||
| Number of analog inputs | 8 | |
| permissible input voltage for voltage input (destruction limit), max. | 75 V; 20 V DC permanent, 75 V DC for max. 1 s (duty factor 1:20) | |
| Input ranges | ||
| Voltage | No | |
| Current | No | |
| Thermocouple | Yes | |
| Resistance thermometer | No | |
| Resistance | No | |
| Input ranges (rated values), voltages | ||
| 0 to +10 V | No | |
| 1 to 5 V | No | |
| 1 to 10 V | No | |
| -1 V to +1 V | No | |
| -10 V to +10 V | No | |
| -2.5 V to +2.5 V | No | |
| -250 mV to +250 mV | No | |
| -5 V to +5 V | No | |
| -50 mV to +50 mV | No | |
| -500 mV to +500 mV | No | |
| -80 mV to +80 mV | No | |
| Input ranges (rated values), currents | ||
| 0 to 20 mA | No | |
| -10 to +10 mA | No | |
| -20 to +20 mA | No | |
| -3.2 to +3.2 mA | No | |
| 4 to 20 mA | No | |
| Input ranges (rated values), thermoelements | ||
| Type B | Yes | |
| Type E | Yes | |
| Type J | Yes | |
| Type K | Yes | |
| Type L | Yes | |
| Type N | Yes | |
| Type R | Yes | |
| Type S | Yes | |
| Type T | Yes | |
| Type U | Yes | |
| Type TXK/TXK(L) to GOST | Yes | |
| Input ranges (rated values), resistance thermometers | ||
| Cu 10 | No | |
| Ni 100 | No | |
| Ni 1000 | No | |
| LG-Ni 1000 | No | |
| Ni 120 | No | |
| Ni 200 | No | |
| Ni 500 | No | |
| Pt 100 | No | |
| Pt 1000 | No | |
| Pt 200 | No | |
| Pt 500 | No | |
| Input ranges (rated values), resistors | ||
| 0 to 150 ohms | No | |
| 0 to 300 ohms | No | |
| 0 to 600 ohms | No | |
| 0 to 6000 ohms | No | |
| Thermocouple (TC) | ||
| for thermocouples | Type B, E, J, K, L, N, R, S. T, U, C | |
| Temperature compensation | ||
| Parameterizable | Yes | |
| internal temperature compensation | Yes | |
| external temperature compensation with compensations socket | Yes | |
| external temperature compensation with Pt100 | Yes | |
| Characteristic linearization | ||
| Parameterizable | Yes | |
| Cable length | ||
| Cable length, shielded, max. | 100 m | |
| Analog value creation | ||
| Measurement principle | integrating | |
| Integrations and conversion time/ resolution per channel | ||
| Resolution with overrange (bit including sign), max. | 16 bit; Two’s complement | |
| Integration time, parameterizable | Yes | |
| Basic conversion time, ms | Up to 4 channels: 10 ms per module, 5 channels upwards: 190 ms per module | |
| Interference voltage suppression for interference frequency f1 in Hz | 400 / 60 / 50 Hz | |
| Errors/accuracies | ||
| Operational limit in overall temperature range | ||
| Voltage, relative to input area | +/- 1 K | |
| Isochronous mode | ||
| Isochronous operation (application synchronized up to terminal) | No | |
| Interrupts/diagnostics/status information | ||
| Alarms | ||
| Diagnostic alarm | Yes; Parameterizable per group | |
| Limit value alarm | Yes; Parameterizable | |
| Diagnostic messages | ||
| Diagnostic functions | Yes; Parameterizable | |
| Diagnostic information readable | Yes | |
| Diagnostics | Yes | |
| Diagnostics indication LED | ||
| Group error SF (red) | Yes | |
| Galvanic isolation | ||
| Galvanic isolation analog inputs | ||
| between the channels | No | |
| between the channels, in groups of | 2 | |
| between the channels and the backplane bus | Yes | |
| Isolation | ||
| Isolation checked with | 500 V DC | |
| Connection method | ||
| required front connector | 40-pin | |
| Dimensions | ||
| Width | 40 mm | |
| Height | 125 mm | |
| Depth | 120 mm | |
| Weight | ||
| Weight, approx. | 272 g | |
Our company have the compatible cable, named 331-7PF11-0AB0, can replace Siemens 6ES7331-7PF11-0AB0.
You can have a look on the picture.
You can get it only need USD440.00/pc. Buy now ====> 
It’s tested before shippment.Not made by Siemens,OEM product as the replacement.
The quality is guaranteed, we have 1 year warranty for our compatible products.
Please find below discription of our compatible OEM 331-7PF11-0AB0:
|
Model |
SM331 |
|
Product Description |
8AI;
Thermocouple temperature measurement modules; Input voltage range:±150mV |
| Power consumption | |
|
·Rate value |
24V DC |
|
·From backplane bus current consumption |
100mA |
|
·From L+ |
200mA |
|
·Power loss |
3W |
|
The power of transmitter |
|
|
·Supply current |
/ |
|
·short-circuit protection |
/ |
|
Number of analog inputs |
8 |
| Cable Length (Shielded) | Max:100m |
|
Input type and input range |
|
|
·voltage |
±150mV(-32000~+32000) |
|
·current(4wire) |
|
|
·current(2wire) |
/ |
|
·tesistance |
|
|
·thermocouple |
Type:T,E,J,K,N,R,S |
|
·RTD |
/ |
|
A/D resolution |
16bits |
|
Basic conversion time(per channel) |
190ms |
|
Interference frequency suppression |
400/50/60Hz |
| Tolerance(Over entire temperature range) | |
|
·Voltage |
±0.6% |
|
·Current |
/ |
|
·resistance |
/ |
|
·temperature |
±1℃ |
| Interrupts | |
|
Diagnostic interrupt |
Per group Yes,Configurable |
|
Limit-value interrupt |
Yes,Configurable |
| Isolation tested for contact | |
|
·Between channels |
Yes |
|
·Between channels and backplane bu |
Yes |
| Front connector | 40-pin |
|
Dimensions(W x H x D)(mm) |
40×125×120 |
| Order Number | 331-7PF11-0AB0 |
Any question, please feel free to contact us.
Recent Comments