May 22
2013
SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM323 6ES7 323-1BL00-0AA0 16DI 24V DC/ 16DO 24V DC
SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM323 6ES7 323-1BL00-0AA0 16DI 24V DC/ 16DO 24V DC
6ES7323-1BL00-0AA0 SM323, 16DI/DO, DC24V, 0,5A
SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 16 DI AND 16 DO, 24V DC, 0.5A, AGGREGATE CURRENT 4A, 1X40 PIN
Here, please find below data sheet of Siemens original 6ES7 323-1BL00-0AA0:
|
- |
SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 16 DI AND 16 DO, 24V DC, 0.5A, AGGREGATE CURRENT 4A, 1X40 PIN
|
|
| Supply voltage | ||
| Load voltage L+ | ||
| Rated value (DC) | 24 V | |
| permissible range, lower limit (DC) | 20.4 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| Input current | ||
| from load voltage L+ (without load), max. | 80 mA | |
| from backplane bus 5 V DC, max. | 80 mA | |
| Power losses | ||
| Power loss, typ. | 6.5 W | |
| Digital inputs | ||
| Number/binary inputs | 16 | |
| Input characteristic curve acc. to IEC 61131, Type 1 | Yes | |
| Number of simultaneously controllable inputs | ||
| all mounting positions | ||
| up to 40 °C, max. | 16 | |
| up to 60 °C, max. | 8 | |
| Input voltage | ||
| Type of input voltage | DC | |
| Rated value, DC | 24 V | |
| for signal “0″ | -30 to +5 V | |
| for signal “1″ | 13 to 30 V | |
| Input current | ||
| for signal “1″, typ. | 7 mA | |
| Input delay (for rated value of input voltage) | ||
| for standard inputs | ||
| at “0″ to “1″, min. | 1.2 ms | |
| at “0″ to “1″, max. | 4.8 ms | |
| at “1″ to “0″, min. | 1.2 ms | |
| at “1″ to “0″, max. | 4.8 ms | |
| Cable length | ||
| Cable length, shielded, max. | 1000 m | |
| Cable length unshielded, max. | 600 m | |
| Digital outputs | ||
| Number/binary outputs | 16 | |
| Functionality/short-circuit strength | Yes; Electronic | |
| Response threshold, typ. | 1 A | |
| Limitation of inductive shutdown voltage to | L+ (-48 V) | |
| Lamp load, max. | 5 W | |
| Controlling a digital input | Yes | |
| Load resistance range | ||
| lower limit | 48 Ω | |
| upper limit | 4 kΩ | |
| Output voltage | ||
| for signal “1″, min. | L+ (-0.8 V) | |
| Output current | ||
| for signal “1″ rated value | 0.5 A | |
| for signal “1″ permissible range for 0 to 60 °C, min. | 5 mA | |
| for signal “1″ permissible range for 0 to 60 °C, max. | 0.6 A | |
| for signal “1″ minimum load current | 5 mA | |
| for signal “0″ residual current, max. | 0.5 mA | |
| Output delay with resistive load | ||
| “0″ to “1″, max. | 100 µs | |
| “1″ to “0″, max. | 500 µs | |
| Parallel switching of 2 outputs | ||
| for increased power | No | |
| for redundant control of a load | Yes; only outputs of the same group | |
| Switching frequency | ||
| with resistive load, max. | 100 Hz | |
| with inductive load, max. | 0.5 Hz | |
| on lamp load, max. | 100 Hz | |
| Aggregate current of outputs (per group) | ||
| horizontal installation | ||
| up to 40 °C, max. | 4 A | |
| up to 60 °C, max. | 3 A | |
| Cable length | ||
| Cable length, shielded, max. | 1000 m | |
| Cable length unshielded, max. | 600 m | |
| Encoder | ||
| Connectable encoders | ||
| 2-wire sensor | Yes | |
| Permissible quiescent current (2-wire sensor), max. | 1.5 mA | |
| Isochronous mode | ||
| Isochronous operation (application synchronized up to terminal) | No | |
| Interrupts/diagnostics/status information | ||
| Alarms | ||
| Alarms | No | |
| Diagnostic messages | ||
| Diagnostic functions | No | |
| Diagnostics indication LED | ||
| Status indicator digital output (green) | Yes | |
| Status indicator digital input (green) | Yes | |
| Galvanic isolation | ||
| Galvanic isolation digital inputs | ||
| between the channels | Yes | |
| between the channels, in groups of | 16 | |
| between the channels and the backplane bus | Yes; Optocoupler | |
| Galvanic isolation digital outputs | ||
| between the channels | Yes | |
| between the channels, in groups of | 8 | |
| between the channels and the backplane bus | Yes; Optocoupler | |
| Permissible potential difference | ||
| between different circuits | 75 VDC / 60 VAC | |
| Isolation | ||
| Isolation checked with | 500 V DC | |
| Connection method | ||
| required front connector | 40-pin | |
| Dimensions | ||
| Width | 40 mm | |
| Height | 125 mm | |
| Depth | 120 mm | |
| Weight | ||
| Weight, approx. | 260 g | |
Our company have the compatible cable, named 323-1BL00-0AA0, can replace Siemens 6ES7 323-1BL00-0AA0.You can have a look on the picture.
You can get it only need USD247.00/pc. Buy now ====> 
It’s tested before shippment.Not made by Siemens,OEM product as the replacement.
The quality is guaranteed, we have 1 year warranty for our compatible products.
Please find below discription of our compatible OEM 323-1BL00-0AA0:
|
Model |
SM323 inputs/outputs:16 |
| Product Description | 16DI,24VDC/16DO, 24 VDC; Transistor;Optical isolation with high immunity. |
| Power consumption | |
| ·From backplane bus current consumption | 80mA |
| ·Power loss | 6.5W |
| Input Feature | |
| Number of digital inputs | 16 |
| Input voltage | |
| ·Rate value | 24V DC |
| ·For ”0” signal | -30~5V DC |
| ·For ”1” signal | 13~30V DC |
| Input current | 7mA |
| Input delay | |
| ·From “0” to “1”,Min | 1.2~4.8ms |
| ·From “1” to “0”,Min | 1.2~4.8ms |
| Input type | NPN |
| Connection of 2-wire BERO sensor | Yes |
| Permissible quiescent current | 1.5mA |
| Output Feature | |
| Number of digital outputs | 16 |
| Short-circuit protection | Yes,Electronic |
| Inductive cutoff voltage | L+(-53V) |
| Lamp load.Max | 5W |
| Output voltage:for ”1” signal | Min:L+(-53V) |
| Output current:for ”1” signal | 0.5A |
| Isolation tested for contact | |
| ·Between channels and backplane bus | Yes |
| ·Per group between channels | Yes |
| Cable Length (Shielded) | 1,000m |
| Cable Length (unshielded) | 600m |
| The status indicates | Green LED each channel |
| Front connector | 40-pin |
| Dimensions(W x H x D)(mm) | 40×125×120 |
| Order Number | 323-1BL00-0AA0 |
Please feel free to contact me for any question.
Recent Comments