Profibus Connector

Sep 20 2013

Siemens 6ES7332-5HF00-0AB0 ANALOG MODULE

↵

↵Introduction to 6ES7332-5HF00-0AA0

SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 8 AO, U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS

Data sheet of Siemens 6ES7332-5HF00-0AA0

Supply voltage
Load voltage L+
Rated value (DC)	24 V
Input current
from load voltage L+ (without load), max.	340 mA
from backplane bus 5 V DC, max.	100 mA
Power losses
Power loss, typ.	6 W
Analog outputs
Number of analog outputs	8
Voltage output, short-circuit protection	Yes
Voltage output, short-circuit current, max.	25 mA
Current output, no-load voltage, max.	18 V
Output ranges, voltage
0 to 10 V	Yes
1 to 5 V	Yes
-10 to +10 V	Yes
Output ranges, current
0 to 20 mA	Yes
-20 to +20 mA	Yes
4 to 20 mA	Yes
Load impedance (in rated range of output)
with voltage outputs, min.	1 kΩ
with voltage outputs, capacitive load, max.	1 µF
with current outputs, max.	500 Ω
with current outputs, inductive load, max.	10 mH
Cable length
Cable length, shielded, max.	200 m
Analog value creation
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	12 bit; +/-10 V, +/-20 mA, 4 to 20 mA, 1 to 5 V: 11 bits + sign; 0 to 10 V, 0 to 20 mA: 12 bits
Conversion time (per channel)	0.8 ms
Settling time
for resistive load	0.2 ms
for capacitive load	3.3 ms
for inductive load	0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to output area	+/- 0,5 %
Current, relative to output area	+/- 0,6 %
Basic error limit (operational limit at 25 °C)
Voltage, relative to output area	+/- 0,4 %
Current, relative to output area	+/- 0,5 %
Interrupts/diagnostics/status information
Substitute values connectable	Yes; Parameterizable
Alarms
Diagnostic alarm	Yes; Parameterizable
Diagnostic messages
Diagnostic information readable	Yes
Diagnostics	Yes
Diagnostics indication LED
Group error SF (red)	Yes
Galvanic isolation
Galvanic isolation analog outputs
between the channels and the backplane bus	Yes
Isolation
Isolation checked with	500 V DC
Connection method
required front connector	40-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weights
Weight, approx.	272 g

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

Our company (Kollewin Technology CO., Limited) have a new product,

named 332-5HF00-0AA0,

it is 100% compatible with Siemens original part.

Part#: 332-5HF00-0AA0

Unit price:USD554.60/pc
Description: S7-300 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

Here, you also need 1 piece of 40 pin front connector to connect with it..

Our compatible 6ES7 392-1AM00-0AA0 can meet your requirements.

6ES7 392-1AM00-0AA0 @USD16.90/pc

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Discriptions of our compatible OEM 332-5HF00-0AA0

Model	SM332 8AO
Product Description	8AO; Resolution:12bits; High-accuracy
Power consumption
·From bus current consumption	100mA
·From L+	70mA
·Power loss	6W
Number of analog outputs	8
Load voltage+rated value	24V
Shielded cable length,Max	200m
Voltage output, Max,short circuit Current	Yes
Voltage output, Short circuit current(Max)	25mA
Voltage output, Open-circuit current,Max	18V
Load impedance
·Voltage outputs,Min	1KΩ
·current outputs,Max	500Ω
Output ranges
·voltage	±10V,0~10V,1~5V
·current	±20mA,0~20mA,4~20mA
D/A resolution	12bit
conversion time(per channel)	Max:0.8ms
Setting time
·Resistive loads	0.1ms
·Capacitive loads	3.3ms
·Inductive loads	0.5ms
Output cross talk	>40dB
Tolerance(Over entire temperature range)
·Voltage output	±0.5%
·Current output	±0.6%
Diagnostic interrupt	None
Group fault error	Red LED
Isolution tested for contact
·Between channels and backplane bus	Yes
·Between channels and load voltage L+	Yes
Front connector	40-pin
Dimensions(W x H x D)(mm)	40×125×120
Order Number	332-5HF00-0AB0

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories SIEMENS S7-300 on September 20, 2013 by nancy | No Comments
Tags: 6ES7332-5HF00-0AB0, Analog module, S7-300, Siemens

Sep 19 2013

Siemens 6ES7331-7PF11-0AB0 ANALOG MODULE

↵

↵Introduction to 6ES7331-7PF11-0AB0

SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATATED, 8 AI THERMOCOUPLE, TYPE B, E, J, K, L, N, R, S, T TXK/TXK(L) ACCORDING GOST 16 BIT, 50 MS, 1 X 40 PIN

Data sheet of Siemens 6ES7331-7PF11-0AB0

Supply voltage
Load voltage L+
Rated value (DC)	24 V
Reverse polarity protection	Yes
Input current
from load voltage L+ (without load), max.	200 mA
from backplane bus 5 V DC, max.	100 mA
Power losses
Power loss, typ.	3 W
Analog inputs
Number of analog inputs	8
permissible input voltage for voltage input (destruction limit), max.	75 V; 20 V DC permanent, 75 V DC for max. 1 s (duty factor 1:20)
Input ranges
Voltage	No
Current	No
Thermocouple	Yes
Resistance thermometer	No
Resistance	No
Input ranges (rated values), voltages
0 to +10 V	No
1 to 5 V	No
1 to 10 V	No
-1 V to +1 V	No
-10 V to +10 V	No
-2.5 V to +2.5 V	No
-250 mV to +250 mV	No
-5 V to +5 V	No
-50 mV to +50 mV	No
-500 mV to +500 mV	No
-80 mV to +80 mV	No
Input ranges (rated values), currents
0 to 20 mA	No
-10 to +10 mA	No
-20 to +20 mA	No
-3.2 to +3.2 mA	No
4 to 20 mA	No
Input ranges (rated values), thermoelements
Type B	Yes
Type E	Yes
Type J	Yes
Type K	Yes
Type L	Yes
Type N	Yes
Type R	Yes
Type S	Yes
Type T	Yes
Type U	Yes
Type TXK/TXK(L) to GOST	Yes
Input ranges (rated values), resistance thermometers
Cu 10	No
Ni 100	No
Ni 1000	No
LG-Ni 1000	No
Ni 120	No
Ni 200	No
Ni 500	No
Pt 100	No
Pt 1000	No
Pt 200	No
Pt 500	No
Input ranges (rated values), resistors
0 to 150 ohms	No
0 to 300 ohms	No
0 to 600 ohms	No
0 to 6000 ohms	No
Thermocouple (TC)
for thermocouples	Type B, E, J, K, L, N, R, S. T, U, C
Temperature compensation
Parameterizable	Yes
internal temperature compensation	Yes
external temperature compensation with compensations socket	Yes
external temperature compensation with Pt100	Yes
Characteristic linearization
Parameterizable	Yes
Cable length
Cable length, shielded, max.	100 m
Analog value creation
Measurement principle	integrating
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	16 bit; Two's complement
Integration time, parameterizable	Yes
Basic conversion time, ms	Up to 4 channels: 10 ms per module, 5 channels upwards: 190 ms per module
Interference voltage suppression for interference frequency f1 in Hz	400 / 60 / 50 Hz
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to input area	+/- 1 K
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm	Yes; Parameterizable per group
Limit value alarm	Yes; Parameterizable
Diagnostic messages
Diagnostic functions	Yes; Parameterizable
Diagnostic information readable	Yes
Diagnostics	Yes
Diagnostics indication LED
Group error SF (red)	Yes
Galvanic isolation
Galvanic isolation analog inputs
between the channels	No
between the channels, in groups of	2
between the channels and the backplane bus	Yes
Isolation
Isolation checked with	500 V DC
Connection method
required front connector	40-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weights
Weight, approx.	272 g

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

Our company (Kollewin Technology CO., Limited) have a new product,

named 331-7PF11-0AB0,

it is 100% compatible with Siemens original part.

Part#: 331-7PF11-0AB0

Unit price on request, please contact me: Nancy

Description: S7-300 ANALOG module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

Here, you also need 1 piece of 40 pin front connector to connect with it..

Our compatible 6ES7 392-1AM00-0AA0 can meet your requirements.

6ES7 392-1AM00-0AA0 @USD16.90/pc

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories SIEMENS S7-300 on September 19, 2013 by nancy | No Comments
Tags: 6ES7331-7PF11-0AB0, Analog module, S7-300, Siemens

Sep 14 2013

Siemens 6ES7235-0KD22-0XA0 ANALOG MODULE

↵

↵Introduction to 6ES7235-0KD22-0XA0

SIMATIC S7-200, ANALOG I/O EM 235, FOR S7-22X CPU ONLY, 4 AI, DC +/-10V; 1AQ, DC +/-10V 12 BIT CONVERTER

Data sheet of Siemens 6ES7235-0KD22-0XA0

Input current
from backplane bus 5 V DC, max.	30 mA
from sensor current supply or external current supply (24 V DC), max.	60 mA
Power losses
Power loss, typ.	2 W
Analog inputs
Number of analog inputs	4; Difference
permissible input voltage for voltage input (destruction limit), max.	30 V
permissible input current for current input (destruction limit), max.	32 mA
Input ranges
Voltage	Yes
Current	Yes
Input ranges (rated values), voltages
0 to +50 mV	Yes
0 to +100 mV	Yes
0 to +500 mV	Yes
0 to +1 V	Yes
0 to +5 V	Yes
0 to +10 V	Yes
-1 V to +1 V	Yes
-10 V to +10 V	Yes
-100 mV to +100 mV	Yes
-2.5 V to +2.5 V	Yes
-25 mV to +25 mV	Yes
-250 mV to +250 mV	Yes
-5 V to +5 V	Yes
-50 mV to +50 mV	Yes
-500 mV to +500 mV	Yes
Input ranges (rated values), currents
0 to 20 mA	Yes
Thermocouple (TC)
Temperature compensation
Parameterizable	No
Analog outputs
Number of analog outputs	1
Output ranges, voltage
-10 to +10 V	Yes
Output ranges, current
0 to 20 mA	Yes
Load impedance (in rated range of output)
with voltage outputs, min.	5 kΩ
with current outputs, max.	0.5 kΩ
Analog value creation
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	12 bit; 11 bits for current output
Basic conversion time, ms	< 0.25 ms
Interference voltage suppression for interference frequency f1 in Hz	40 dB, DC to 60 Hz
Settling time
for voltage output	100 µs
for current output	2 ms
Displayable conversion value range
bipolar signals	-32000 to +32000
unipolar signals	0 to 32000
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to output area	+/- 2 %
Current, relative to output area	+/- 2 %
Basic error limit (operational limit at 25 °C)
Voltage, relative to output area	+/- 0,5 %
Current, relative to output area	+/- 0,5 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
common mode voltage, max.	12 V
Interrupts/diagnostics/status information
Diagnostics indication LED
External fault EXTF (red)	Yes
Galvanic isolation
Galvanic isolation analog inputs
Galvanic isolation analog inputs	No
Galvanic isolation analog outputs
Galvanic isolation analog outputs	No
Connection method
Plug-in I/O terminals	No
Dimensions
Width	71.2 mm
Height	80 mm
Depth	62 mm
Weights
Weight, approx.	186 g

System User's Manual PDF of S7-200 digital & analog modules:

s7200- modules_system_manual_en-US

Our company (Kollewin Technology CO., Limited) have a new product,

named 235-0KD22-0XA0,

it is 100% compatible with Siemens original part.

Part#: 235-0KD22-0XA0

Unit price:USD123.00/pc
Description: S7-200 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Discriptions of our compatible OEM 235-0KD22-0XA0

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories Siemens S7-200 on September 14, 2013 by nancy | No Comments
Tags: 6ES7235-0KD22-0XA0, Analog module, S7-200, Siemens

Sep 13 2013

Siemens 6ES7232-0HB22-0XA0 ANALOG MODULE

↵

↵Introduction to 6ES7232-0HB22-0XA0

SIMATIC S7-200, ANALOG OUTPUT EM 232, FOR S7-22X CPU ONLY, 2 AQ, +/- 10V DC, 12 BIT CONVERTER

Data sheet of Siemens 6ES7232-0HB22-0XA0

Input current
from backplane bus 5 V DC, max.	20 mA
from sensor current supply or external current supply (24 V DC), max.	70 mA
Power losses
Power loss, typ.	2 W
Analog outputs
Number of analog outputs	2
Output ranges, voltage
-10 to +10 V	Yes
Output ranges, current
4 to 20 mA	Yes
Load impedance (in rated range of output)
with voltage outputs, min.	5 kΩ
with current outputs, max.	0.5 kΩ
Analog value creation
Integrations and conversion time/ resolution per channel
Resolution (incl. overrange)	V/12 bits, I/11 bits
Settling time
for voltage output	100 µs
for current output	2 ms
Displayable conversion value range
bipolar signals	-32000 to +32000
unipolar signals	0 to 32000
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to output area	+/- 2 %
Current, relative to output area	+/- 2 %
Basic error limit (operational limit at 25 °C)
Voltage, relative to output area	+/- 0,5 %
Current, relative to output area	+/- 0,5 %
Galvanic isolation
Galvanic isolation analog outputs
Galvanic isolation analog outputs	No
Connection method
Plug-in I/O terminals	No
Dimensions
Width	46 mm
Height	80 mm
Depth	62 mm
Weights
Weight, approx.	148 g

System User's Manual PDF of S7-200 digital & analog modules:

s7200- modules_system_manual_en-US

Our company (Kollewin Technology CO., Limited) have a new product,

named 231-7PC22-0XA0,

it is 100% compatible with Siemens original part.

Part#: 232-0HB22-0XA0

Price request, please contact me: Nancy
Description: S7-200 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Discriptions of our compatible OEM 232-0HB22-0XA0

Input current
from backplane bus 5 V DC, max.	20 mA
from sensor current supply or external current supply (24 V DC), max.	70 mA
Power losses
Power loss, typ.	2 W
Analog outputs
Number of analog outputs	2
Output ranges, voltage
-10 to +10 V	Yes
Output ranges, current
4 to 20 mA	Yes
Load impedance (in rated range of output)
with voltage outputs, min.	5 kΩ
with current outputs, max.	0.5 kΩ
Analog value creation
Integrations and conversion time/ resolution per channel
Resolution (incl. overrange)	V/12 bits, I/11 bits
Settling time
for voltage output	100 µs
for current output	2 ms
Displayable conversion value range
bipolar signals	-32000 to +32000
unipolar signals	0 to 32000
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to output area	+/- 2 %
Current, relative to output area	+/- 2 %
Basic error limit (operational limit at 25 °C)
Voltage, relative to output area	+/- 0,5 %
Current, relative to output area	+/- 0,5 %
Galvanic isolation
Galvanic isolation analog outputs
Galvanic isolation analog outputs	No
Connection method
Plug-in I/O terminals	No
Dimensions
Width	46 mm
Height	80 mm
Depth	62 mm
Weights
Weight, approx.	148 g

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories Siemens S7-200 on September 13, 2013 by nancy | No Comments
Tags: 6ES7232-0HB22-0XA0, Analog module, S7-200, Siemens

Sep 12 2013

Siemens 6ES7232-0HD22-0XA0 ANALOG MODULE

↵

↵Introduction to 6ES7232-0HD22-0XA0

SIMATIC S7-200, ANALOG OUTPUT EM 232, FOR S7-22X CPU ONLY, 4 AQ, +/- 10V DC, 0..20MA 12/11 BIT CONVERTER

Data sheet of Siemens 6ES7232-0HD22-0XA0

Input current
from backplane bus 5 V DC, max.	20 mA
from sensor current supply or external current supply (24 V DC), max.	70 mA
Power losses
Power loss, typ.	2 W
Analog outputs
Number of analog outputs	4
Output ranges, voltage
-10 to +10 V	Yes
Output ranges, current
4 to 20 mA	Yes
Load impedance (in rated range of output)
with voltage outputs, min.	5 kΩ
with current outputs, max.	0.5 kΩ
Analog value creation
Integrations and conversion time/ resolution per channel
Resolution (incl. overrange)	V/12 bits, I/11 bits
Settling time
for voltage output	100 µs
for current output	2 ms
Displayable conversion value range
bipolar signals	-32000 to +32000
unipolar signals	0 to 32000
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to output area	+/- 2 %
Current, relative to output area	+/- 2 %
Basic error limit (operational limit at 25 °C)
Voltage, relative to output area	+/- 0,5 %
Current, relative to output area	+/- 0,5 %
Galvanic isolation
Galvanic isolation analog outputs
Galvanic isolation analog outputs	No
Connection method
Plug-in I/O terminals	No
Dimensions
Width	71.2 mm
Height	80 mm
Depth	62 mm
Weights
Weight, approx.	190 g

System User's Manual PDF of S7-200 digital & analog modules:

s7200- modules_system_manual_en-US

Our company (Kollewin Technology CO., Limited) have a new product,

named 232-0HD22-0XA0 ,

it is 100% compatible with Siemens original part.

Part#: 232-0HD22-0XA0

Unit price:USD212.00/pc
Description: S7-200 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Discriptions of our compatible OEM 232-0HD22-0XA0

Model	EM232 4 outputs ×12bits
Product Description	4AO 12 bits resolution voltage output;, 11 bits resolution current output
Input Feature
From bus current consumption	22mA
From L+ current consumption	92mA
Power loss	2.5W
Number of analog Input	-
Signal input type	-
Maximum input voltage	-
Maximum input current	-
Voltange input range: Unipolar	-
Voltange input range: Bipolar	-
current input range	-
Resolution	-
Bipolar,full-scale range	-
Unipolar, full-scale range	-
Analog to digital conversion time	-
Output Feature
Number of analog Input	4
Input voltage range	-10~+10V
Input current range	0~20mA
Load inpedance
·for voltage outputs	Min:5KΩ
·for current outputs	Max:0.5KΩ
Resolution	12 bits voltage output; 11 bits current output
Data word format
·Displayable:voltage output	-32，000~+32，000
·Displayable:current output	0~32，000
Basic error	±0.5% of full range
Dimensions(W x H x D)(mm)	71.2×80×62
Order Number	232-OHD22-0XA0

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories Siemens S7-200 on September 12, 2013 by nancy | No Comments
Tags: 6ES7232-0HD22-0XA0, Analog module, S7-200, Siemens

Sep 11 2013

Siemens 6ES7231-7PB22-0XA0 ANALOG MODULE

↵

↵Introduction to 6ES7231-7PB22-0XA0

SIMATIC S7-200, RTD INPUT MOD. EM 231, FOR S7-22X CPU ONLY, 2AI, PT100/200/500/1000/10000 NI100/120/1000, CU10, RESISTANCE 150/300/600 OHM 15 BIT+ SIGN

Data sheet of Siemens 6ES7231-7PB22-0XA0

Input current
from load voltage L+ (without load), max.	60 mA
from backplane bus 5 V DC, max.	87 mA
Power losses
Power loss, typ.	1.8 W; Sensor: 1 mW
Analog inputs
Number of analog inputs	2
permissible input voltage for voltage input (destruction limit), max.	30 V; 30 V DC (probe), 5 V DC (source)
Loop resistance cable	20 Ω; max. 2.7 Ohm for Cu
Updating time (all channels)	405 ms; 700 ms with Pt10000
Input ranges
Voltage	No
Current	No
Thermocouple	No
Resistance thermometer	Yes
Resistance	Yes
Input ranges (rated values), resistance thermometers
Cu 10	Yes
Input resistance (Cu 10)	10 MΩ
Ni 10	Yes
Input resistance (Ni 10)	10 MΩ
Ni 1000	Yes
Input resistance (Ni 1000)	10 MΩ
Ni 120	Yes
Input resistance (Ni 120)	10 MΩ
Pt 100	Yes
Input resistance (Pt 100)	10 MΩ
Pt 1000	Yes
Input resistance (Pt 1000)	10 MΩ
Pt 10000	Yes
Input resistance (Pt 10000)	10 MΩ
Pt 200	Yes
Input resistance (Pt 200)	10 MΩ
Pt 500	Yes
Input resistance (Pt 500)	10 MΩ
Input ranges (rated values), resistors
0 to 150 ohms	Yes
Input resistance (0 to 150 ohms)	10 MΩ
0 to 300 ohms	Yes
Input resistance (0 to 300 ohms)	10 MΩ
0 to 600 ohms	Yes
Input resistance (0 to 600 ohms)	10 MΩ
Cable length
Cable length, shielded, max.	100 m; to the sensor
Analog value creation
Measurement principle	Sigma Delta
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	16 bit; Temperature 0.1 °C / 0.1 °F
Interference voltage suppression for interference frequency f1 in Hz	85 dB at 50 / 60 / 400 Hz
Displayable conversion value range
bipolar signals	-27.648 to +27.648
Errors/accuracies
Repeat accuracy in settled status at 25 °C (relative to input area)	+/- 0,05 %
Operational limit in overall temperature range
Voltage, relative to output area	+/- 0,1 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
common mode voltage, max.	0 V
Common mode interference, min.	120 dB; At 120 V DC
Interrupts/diagnostics/status information
Diagnostics indication LED
External fault EXTF (red)	Yes
Group error SF (red)	Yes
Galvanic isolation
Galvanic isolation analog inputs
Galvanic isolation analog inputs	Yes
Permissible potential difference
between inputs and MANA (UCM)	500 V AC
between M internally and the inputs	500 V AC
Connection method
Plug-in I/O terminals	No
Dimensions
Width	71.2 mm
Height	80 mm
Depth	62 mm
Weights
Weight, approx.	210 g

System User's Manual PDF of S7-200 digital & analog modules:

s7200- modules_system_manual_en-US

Our company (Kollewin Technology CO., Limited) have a new product,

named 231-7PB22-0XA0 ,

it is 100% compatible with Siemens original part.

Part#: 231-7PB22-0XA0

Unit price:USD129.86.00/pc
Description: S7-200 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Discriptions of our compatible OEM 231-7PB22-0XA0

Model	EM231 2 inputs,RTD
Product Description	2AI;RTD temperature measurement modules; Resolution:16bits Optical isolation; High immunity;stable
From bus current consumption	45mA
From L+ current consumption	20mA
Power loss	1W
Number of analog inputs	2
Input type·	Module ground referenced RTD
Common-mode rejection	>120dB@120V AC
Wire loop resistance(Max)	20 Ω
Module update time	300ms
Data word format	Resistance:0~+27648 Ω
Input range	RTD: Pt100,Pt200,Pt500,Pt1000,Pt10000,Ni100 Ni120,Ni1000,Cu(9.035) Resistance: 150Ω, 300Ω,600Ω
Measuring principle	Sigma→delta
Resolution	15+1 Sign bit
Basic error	0.1%FS
Isolation (field to logic)	>500V
24VDC supply voltage range	20.4~28.8V DC
Dimensions(W x H x D)(mm)	71.2×80×62
Order Number	231-7PB22-0XA0

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories Siemens S7-200 on September 11, 2013 by nancy | No Comments
Tags: 6ES7231-7PB22-0XA0, Analog module, S7-200, Siemens

Sep 9 2013

Siemens 6ES7231-7PH22-0XA0 ANALOG MODULE

↵

Introduction to 6ES7231-7PH22-0XA0

Thermocouple temperature measurement modules; Resolution:16bits

Optical isolation; high immunity;stable

Our company (Kollewin Technology CO., Limited) have a new product,

named 231-7PH22-0XA0,

it is 100% compatible with Siemens original part.

Part#: 231-7PH22-0XA0

Unit price:USD187.00/pc
Description: S7-200 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

System User's Manual PDF of S7-200 digital & analog modules:

s7200- modules_system_manual_en-US

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Discriptions of our compatible OEM 231-7PH22-0XA0

Model	EM231 8 inputs Thermocouple
Product Description	8AI; Thermocouple temperature measurement modules; Resolution:16bits Optical isolation; high immunity;stable
Technical Specification
From bus current consumption	107mA
From L+ current consumption	60mA
Power loss	2.1W
Number of analog inputs	8
Signal input type·	Floating Thermocouple
Common-mode rejection	>120dB@120V AC
Wire loop resistance(Max)	100 Ω
Module update time	810ms
Data word format	Voltage:+27648~+27648
Input range	Type· E,J,K,N,R,S,T Voltage range:±80mV
Measuring principle	Sigma→delta
Resolution	15+1 Sign bit
Basic error	0.1%FS
Isolation (field to logic)	>3000V
24VDC supply voltage range	20.4~28.8V DC
Dimensions(W x H x D)(mm)	71.2×80×62
Order Number	231-7PH22-0XA0

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories Siemens S7-200 on September 9, 2013 by nancy | No Comments
Tags: 6ES7231-7PH22-0XA0, Analog module, S7-200, Siemens

Sep 8 2013

Siemens 6ES7231-7PD22-0XA0 ANALOG MODULE

↵

Introduction to 6ES7231-7PD22-0XA0

SIMATIC S7-200, T/C INPUT MOD. EM 231, FOR S7-22X CPU ONLY, 4 AI, +/-80 MV AND THERMOCOUPLE TYPE J,K,S,T,R,E,N; 15BIT+VORZ.

Data sheet of Siemens 6ES7231-7PD22-0XA0

Input current
from load voltage L+ (without load), max.	60 mA
from backplane bus 5 V DC, max.	87 mA
Power losses
Power loss, typ.	1.8 W
Analog inputs
Number of analog inputs	4
permissible input voltage for voltage input (destruction limit), max.	30 V
Loop resistance cable	100 Ω
Updating time (all channels)	405 ms
Input ranges
Voltage	Yes
Current	No
Thermocouple	Yes
Resistance thermometer	No
Resistance	No
Input ranges (rated values), voltages
-80 mV to +80 mV	Yes
Input resistance (-80 mV to +80 mV)	1 MΩ
Input ranges (rated values), thermoelements
Type E	Yes
Type J	Yes
Input resistance (type J)	1 MΩ
Type K	Yes
Input resistance (Type K)	1 MΩ
Type N	Yes
Input resistance (Type N)	1 MΩ
Type R	Yes
Input resistance (Type R)	1 MΩ
Type S	Yes
Input resistance (Type S)	1 MΩ
Type T	Yes
Input resistance (Type T)	1 MΩ
Cable length
Cable length, shielded, max.	100 m; to the sensor
Analog value creation
Measurement principle	Sigma Delta
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	16 bit; Temperature 0.1 °C / 0.1 °F
Interference voltage suppression for interference frequency f1 in Hz	85 dB at 50 / 60 / 400 Hz
Displayable conversion value range
bipolar signals	-27.648 to +27.648
Errors/accuracies
cold connection point	+/-1.5 °C
Repeat accuracy in settled status at 25 °C (relative to input area)	+/- 0,05 %
Operational limit in overall temperature range
Voltage, relative to output area	+/- 0,1 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
common mode voltage, max.	120 V; AC
Common mode interference, min.	120 dB; At 120 V DC
Interrupts/diagnostics/status information
Diagnostics indication LED
External fault EXTF (red)	Yes
Group error SF (red)	Yes
Galvanic isolation
Galvanic isolation analog inputs
Galvanic isolation analog inputs	Yes
Permissible potential difference
between inputs and MANA (UCM)	500 V AC
between M internally and the inputs	500 V AC
Connection method
Plug-in I/O terminals	No
Dimensions
Width	71.2 mm
Height	80 mm
Depth	62 mm
Weights
Weight, approx.	210 g

System User's Manual PDF of S7-200 digital & analog modules:

s7200- modules_system_manual_en-US

Our company (Kollewin Technology CO., Limited) have a new product,

named 231-7PD22-0XA0,

it is 100% compatible with Siemens original part.

Part#: 231-7PD22-0XA0

Unit price:USD126.00/pc
Description: S7-200 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Discriptions of our compatible OEM 231-7PD22-0XA0

Model	EM231 4 inputs Thermocouple
Product Description	4AI; Thermocouple temperature measurement modules; Resolution:16bits Optical isolation; high immunity;stable
Technical Specification
From bus current consumption	87mA
From L+ current consumption	60mA
Power loss	1.8W
Number of analog inputs	4
Signal input type·	Floating Thermocouple
Common-mode rejection	>120dB@120V AC
Wire loop resistance(Max)	100 Ω
Module update time	405ms
Data word format	Voltage:+27648~+27648
Input range	Type· E,J,K,N,R,S,T Voltage range:±80mV
Measuring principle	Sigma→delta
Resolution	15+1 Sign bit
Basic error	0.1%FS
Isolation (field to logic)	>3000V
24VDC supply voltage range	20.4~28.8V DC
Dimensions(W x H x D)(mm)	71.2×80×62
Order Number	231-7PD22-0XA0

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories Siemens S7-200 on September 8, 2013 by nancy | No Comments
Tags: 6ES7231-7PD22-0XA0, Analog module, S7-200, Siemens

Sep 7 2013

Siemens 6ES7231-7PC22-0XA0 ANALOG MODULE

↵

↵Introduction to 6ES7231-7PC22-0XA0

SIMATIC S7-200, RTD INPUT MOD. EM 231, FOR S7-22X CPU ONLY, 4AI, PT100/200/500/1000/10000 NI100/120/1000, CU10, 14 GOST, RESISTANCE 150/300/600 OHM 15 BIT+ SIGN

Data sheet of Siemens 6ES7231-7PC22-0XA0

Input current
from load voltage L+ (without load), max.	60 mA
from backplane bus 5 V DC, max.	87 mA
Power losses
Power loss, typ.	1.8 W; Sensor: 1 mW
Analog inputs
Number of analog inputs	4
permissible input voltage for voltage input (destruction limit), max.	30 V; 30 V DC (probe), 5 V DC (source)
Loop resistance cable	20 Ω; max. 2.7 Ohm for Cu
Updating time (all channels)	810 ms; 1400 ms with Pt10000
Input ranges
Voltage	No
Current	No
Thermocouple	No
Resistance thermometer	Yes
Resistance	Yes
Input ranges (rated values), resistance thermometers
Cu 10	Yes
Input resistance (Cu 10)	10 MΩ
Ni 10	Yes
Input resistance (Ni 10)	10 MΩ
Ni 1000	Yes
Input resistance (Ni 1000)	10 MΩ
Ni 120	Yes
Input resistance (Ni 120)	10 MΩ
Pt 100	Yes
Input resistance (Pt 100)	10 MΩ
Pt 1000	Yes
Input resistance (Pt 1000)	10 MΩ
Pt 10000	Yes
Input resistance (Pt 10000)	10 MΩ
Pt 200	Yes
Input resistance (Pt 200)	10 MΩ
Pt 500	Yes
Input resistance (Pt 500)	10 MΩ
Input ranges (rated values), resistors
0 to 150 ohms	Yes
Input resistance (0 to 150 ohms)	10 MΩ
0 to 300 ohms	Yes
Input resistance (0 to 300 ohms)	10 MΩ
0 to 600 ohms	Yes
Input resistance (0 to 600 ohms)	10 MΩ
Cable length
Cable length, shielded, max.	100 m; to the sensor
Analog value creation
Measurement principle	Sigma Delta
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	16 bit; Temperature 0.1 °C / 0.1 °F
Interference voltage suppression for interference frequency f1 in Hz	85 dB at 50 / 60 / 400 Hz
Displayable conversion value range
bipolar signals	-27.648 to +27.648
Errors/accuracies
Repeat accuracy in settled status at 25 °C (relative to input area)	+/- 0,05 %
Operational limit in overall temperature range
Voltage, relative to output area	+/- 0,1 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
common mode voltage, max.	0 V
Common mode interference, min.	120 dB; At 120 V DC
Interrupts/diagnostics/status information
Diagnostics indication LED
External fault EXTF (red)	Yes
Group error SF (red)	Yes
Galvanic isolation
Galvanic isolation analog inputs
Galvanic isolation analog inputs	Yes
Permissible potential difference
between inputs and MANA (UCM)	500 V AC
between M internally and the inputs	500 V AC
Connection method
Plug-in I/O terminals	No
Dimensions
Width	71.2 mm
Height	80 mm
Depth	62 mm
Weights
Weight, approx.	210 g

System User's Manual PDF of S7-200 digital & analog modules:

s7200- modules_system_manual_en-US

Our company (Kollewin Technology CO., Limited) have a new product,

named 231-7PC22-0XA0 ,

it is 100% compatible with Siemens original part.

Part#: 231-7PC22-0XA0

Unit price:USD212.00/pc
Description: S7-200 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Discriptions of our compatible OEM 231-7PC22-0XA0

Model	EM231 4 inputs,RTD
Product Description	4AI, RTD temperature measurement modules, Resolution:16bits; Optical isolation; High immunity ;stable
From bus current consumption	45mA
From L+ current consumption	20mA
Power loss	1W
Number of analog inputs	4
Input type·	Module ground referenced RTD
Common-mode rejection	>120dB@120V AC
Wire loop resistance(Max)	20 Ω
Module update time	405ms
Data word format	Resistance:0~+27648 Ω
Input range	RTD: Pt100,Pt200,Pt500,Pt1000,Pt10000,Ni100 Ni120,Ni1000,Cu(9.035) Resistance: 150Ω, 300Ω,600Ω
Measuring principle	Sigma→delta
Resolution	15+1 Sign bit
Basic error	0.1%FS
Isolation (field to logic)	>500V
24VDC supply voltage range	20.4~28.8V DC
Dimensions(W x H x D)(mm)	71.2×80×62
Order Number	231-7PC22-0XA0

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories Siemens S7-200 on September 7, 2013 by nancy | No Comments
Tags: 6ES7231-7PC22-0XA0, Analog module, S7-200, Siemens

Sep 6 2013

Siemens 6ES7231-0HF22-0XA0 ANALOG MODULE

↵

Introduction to 6ES7231-0HF22-0XA0

SIMATIC S7-200, ANALOG INPUT EM 231, FOR S7-22X CPU ONLY, 8 AI, 0-10V DC, MAX 2AE 0..20MA 12/11 BIT CONVERTER

Data sheet of Siemens 6ES7231-0HF22-0XA0

Input current
from load voltage L+ (without load), max.	60 mA
from backplane bus 5 V DC, max.	20 mA
Power losses
Power loss, typ.	2 W
Analog inputs
Number of analog inputs	8; Difference
permissible input voltage for voltage input (destruction limit), max.	30 V
permissible input current for current input (destruction limit), max.	40 mA
Input ranges
Voltage	Yes
Current	Yes; for channels 6 and 7 only
Thermocouple	No
Resistance thermometer	No
Resistance	No
Input ranges (rated values), voltages
0 to +5 V	Yes
Input resistance (0 to 5 V)	10 MΩ
0 to +10 V	Yes
Input resistance (0 to 10 V)	10 MΩ
-2.5 V to +2.5 V	Yes
Input resistance (-2.5 V to +2.5 V)	10 MΩ
-5 V to +5 V	Yes
Input resistance (-5 V to +5 V)	10 MΩ
-80 mV to +80 mV	No
Input ranges (rated values), currents
0 to 20 mA	Yes; for channels 6 and 7 only
Input resistance (0 to 20 mA)	10 MΩ
Input ranges (rated values), thermoelements
Type E	No
Type J	No
Type K	No
Type N	No
Type R	No
Type S	No
Type T	No
Input ranges (rated values), resistance thermometers
Cu 10	No
Ni 10	No
Ni 1000	No
Ni 120	No
Pt 100	No
Pt 1000	No
Pt 10000	No
Pt 200	No
Pt 500	No
Input ranges (rated values), resistors
0 to 150 ohms	No
0 to 300 ohms	No
0 to 600 ohms	No
Thermocouple (TC)
Temperature compensation
Parameterizable	No
Cable length
Cable length, shielded, max.	100 m; to the sensor
Analog value creation
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	12 bit
Interference voltage suppression for interference frequency f1 in Hz	40 dB, DC up to 60 V for interference frequency
Conversion time (per channel)	250 µs
Displayable conversion value range
bipolar signals	-32000 to +32000
unipolar signals	0 to 32000
Errors/accuracies
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
common mode voltage, max.	12 V
Interrupts/diagnostics/status information
Diagnostics indication LED
Description	LED, EXTF
Galvanic isolation
Galvanic isolation analog inputs
Galvanic isolation analog inputs	No
Connection method
Plug-in I/O terminals	No
Dimensions
Width	71.2 mm
Height	80 mm
Depth	62 mm
Weights
Weight, approx.	190 g

System User's Manual PDF of S7-200 digital & analog modules:

s7200- modules_system_manual_en-US

Our company (Kollewin Technology CO., Limited) have a new product,

named 231-0HF22-0XA0,

it is 100% compatible with Siemens original part.

Part#: 231-0HF22-0XA0

Unit price:USD143.00/pc
Description: S7-200 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Discriptions of our compatible OEM 231-0HF22-0XA0

Model	EM231 8 inputs × 14 bits
Product Description	8AI,24V DC; Resolution:14bits; High immunity,stable
Technical Specification
From bus current consumption	20mA
From L+ current consumption	60mA
Power loss	2W
Number of analog Inputs	8
Input type	Differential
Voltange input range: Unipolar	0~5v,0~10V
Voltange input range: Bipolar	±5V,±10V
input range:current	0~20mA,+ 20mA
Resolution	14bit
Bipolar,full-scale range	-32,000 to +32,000
Unipolar, full-scale range	0 to +32,000
Cable Length (unShielded)	300m
Input impedance	≥10M Ω Voltage Input
Input impedance	250 Ω Current Input
Isolation tested for contact (field to logic)	No
Analog to digital conversion time	<250µs
Common-mode rejection	40db,DC to 60Hz
Common-mode voltage	Signal voltage + Common-mode voltage≤12V
Maximum input voltage	30V DC
Maximum input current	32mA
Dimensions(W x H x D)(mm)	71.2×80×62
Order Number	231-OHF22-0XA0

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories Siemens S7-200 on September 6, 2013 by nancy | No Comments
Tags: 6ES7231-0HF22-0XA0, Analog module, S7-200, Siemens

Posts Tagged Analog module

Siemens 6ES7332-5HF00-0AB0 ANALOG MODULE

Siemens 6ES7331-7PF11-0AB0 ANALOG MODULE

Siemens 6ES7235-0KD22-0XA0 ANALOG MODULE

Siemens 6ES7232-0HB22-0XA0 ANALOG MODULE

Siemens 6ES7232-0HD22-0XA0 ANALOG MODULE

Siemens 6ES7231-7PB22-0XA0 ANALOG MODULE

Siemens 6ES7231-7PH22-0XA0 ANALOG MODULE

Siemens 6ES7231-7PD22-0XA0 ANALOG MODULE

Siemens 6ES7231-7PC22-0XA0 ANALOG MODULE

Siemens 6ES7231-0HF22-0XA0 ANALOG MODULE

Recent Posts

Categories

Recent Comments

Archives