Aug 17 2013

CP5611-A2 card for Siemens 6GK1561-1AA01

Introduction to 6GK1561-1AA01 (CP5611-A2)

COMMUNICATION PROCESSOR CP 5611 A2 PCI-CARD (32 BIT; 3.3/5V;33/ 66 MHZ) FOR CONNECTION TO PG OR PC WITH PCI-BUS TO PROFIBUS OR MPI (NO WIN9X-SUPPORT!) CURRENTLY ONLY 32BIT SUPPORT IN CONNECTION WITH SIMATIC NET V8.2 SW!

 
Data sheet of 6GK1561-1AA01.
 
Product-type designation CP 5611 A2
  1
COMMUNICATION PROCESSOR CP 5611 A2 PCI-CARD (32 BIT; 3.3/5V;33/ 66 MHZ) FOR CONNECTION TO PG OR PC WITH PCI-BUS TO PROFIBUS OR MPI (NO WIN9X-SUPPORT!) CURRENTLY ONLY 32BIT SUPPORT IN CONNECTION WITH SIMATIC NET V8.2 SW!
Transmission rate  
Transmission rate  
  • at interface 1 / in accordance with PROFIBUS
 
  • minimum
9.6 kbit/s
  • maximum
12 Mbit/s
Interfaces  
Number of electrical connections / at interface 1 / in accordance with PROFIBUS 1
Design of electrical connection / at interface 1 / in accordance with PROFIBUS 9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss  
Type of voltage DC
Supply voltage  
  • 1 / from backplane bus
5 V
Relative symmetrical tolerance  
  • at 5 V / with DC
5 %
Consumed current  
  • 1 / from backplane bus / with DC / maximum
0.5 A
Resistive loss 2.5 W
Permitted ambient conditions  
Ambient temperature  
  • during operating
5…55 °C
  • during storage
-20…+60 °C
  • during transport
-20…+60 °C
Relative humidity  
  • at 25 °C / without condensation / during operating / maximum
95 %
Protection class IP IP00
Design, dimensions and weight  
Width 18 mm
Height 102 mm
Depth 130 mm
Net weight 100 g
Product properties, functions, components / general  
Number of plug-in cards in the same design / can be plugged in / per PC station 1
Number of modules / note -
Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum 50
Software / for DP master function / required Yes, SOFTNET-PB DP
Service / as DP master  
  • DPV0
Yes
  • DPV1
Yes
  • DPV2
No
Number of DP slaves / on DP master / usable 64
Amount of data  
  • of the address area of the inputs / as DP master / overall
14640 byte
  • of the address area of the outputs / as DP master / overall
14640 byte
  • of the address area of the inputs / per DP slave
244 byte
  • of the address area of the outputs / per DP slave
244 byte
  • of the address area of the diagnostic data / per DP slave
244 byte
Service / as DP slave  
  • DPV0
Yes
  • DPV1
No
Amount of data  
  • of the address area of the inputs / as DP slave / overall
122 byte
  • of the address area of the outputs / as DP slave / overall
122 byte
Number of possible connections / for S7/PG communication / maximum 8
Number of configurable connections / per PC station 207
Configuration software / required NCM PC is included in scope of delivery of the required software product
Product function / Port diagnostics Yes
Standards, specifications, approvals  
Standard  
  • for EMC
89/336/EEC
  • for safety / of CSA and UL
CAN/CSA C22.2 & UL 60950-1, UL 1950
  • for emitted interference
EN 61000-6-3
  • for interference immunity
EN 61000-6-2
Verification of suitability  
  • CE mark
Yes
  • C-Tick
Yes
Accessories  
Accessories optional: MPI cable
 
 
More details of CP5611-A2, please find in below data sheet:
CP5611-A2 communication card 6GK1561-1AA01

 

Our company (Kollewin Technology CO., Limited) have a new product,

named CP5611-A2.

It is 100% compatible with Siemens original part.

Part#: CP5611-A2

EX-Work Price: $259.00/pc       buy buttom

 CP5611-A2_1

 

User's manual PDF of CP5611-A2 communication card 6GK1561-1AA01:

CP5611-A2 communication card 6GK1561-1AA01

 

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

 
 
 
Description of our compatible communication card CP5512-A2:

CP5611-A2 communications cards which is Anti-lightning and anti-surge, corresponding to the Siemens 6 GK1 561-1AA01, photoelectric isolation, and applied to desktop computer's PCI slots, to achieve the PROFIBUS DP / MPI / PPI communications between PC or PG and the SIMATIC network, communication rate is 9.6 Kbps ~ 12Mbps.

 

Not made by Siemens,OEM product

Not including MPI extension cable for card communication,if you also need this,please also order it:

MPI Cable

 

Overview of communication card CP5611-A2:
CP5611-A2 communication card is optoelectronic isolated design for industrial applications.There is anti-lightning & anti-surging protection circuit and over-current protection on the RS485 port.The adoption of industrial chip applies to a wide temperature range. CP5611-A2 card is used to achieve the PROFIBUS DP / MPI / PPI communication between PC or PG and the SIMATIC network.

 

Communication services:
PROFIBUS-DP master grade 1 and 2
PROFIBUS-DP slave and SOFTNET-DP slave
MPI/PPI communication
PG/OP communication
S7 communication with SOFTNET-S7

S5-compatible communication (SEND/RECEIVE based on the FDL interface) with SOFTNET-DP or SOFTNET-S7

 

CP5611-A2 applies to the following software:
STEP7 V.52 and above
SOFTNET-S7
SOFTNET-DP
SOFTNET-DP slave
COM PROFIVUS V3.3 and above
STEP 7-Micro/WIN V3.1 and above
ProTool, ProToo/Pro
NCMPC

 

Technical specifications of communication card CP5512-A2:

Transmission rate:9.6Kbps~12Mbps, corresponding maximum communication distance conforms to PROFIBUS standard
Interface: PROFIBUS/MPI/PPI, isolated 9-pin Sub-D socket
Isolation Voltage: 1000VDC
RS485 port with anti-lightning and anti-surging protector, repeatability surge capacity: Ipp = 100A (10/700us, 4KV)
Standard: ITU-TK20/21, VDE 0433. ± 15KV ESD (ESD) protection
Over-current protection: RS485 interface can withstand up to 60V voltage caused by the sustained over-current
PG/PC connection: PCI2.1 standard slot
Standard voltage: +5 VDC
Power: 2.0W
Operating temperature: 0 ~ + 70 'C
Size (width x high) (mm): 102 x 130
Weight: 100g

 

We also have other compatible PLC Programming cables of Siemens

CP5611

CP5611-A2

CP5512

CP5512EXP-NEW

PC Adapter CN-NEW

ES-ETH-PPI-NEW

ETH Adapter CN-NEW

USB/PPIM+

PC/PPI

PC/PPI+

USB/MPI+ V4.0

USB/MPI+ V2.0

PC/MPI+ including RS232 cable

PC/MPI

LOGO!USB-CABLE

LOGO!PC-CABLE

MPI extension cable

PC/TTY

 

Here, more pictures of our compatible cables of Siemens parts

0CB20-1 V6.0_1 PC-TTY_1 CP5512_1 CP5512E_1 logo-usb cable_1 logo-PC cable_1 USB-MPI+V2.0_1 USB-MPI+V4.0_1 USB-MPI V5.0_1 ETH Adapter CN PC Adapter CN

 
 

Of course, we also supply some other brands compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

 

ES-ETH-SC09-NEW

FX-USB-AW

USB-SC09

USB-SC09-FX

SC-09+

SC-10

USB-QC30R2

FX2N-485-BD+

FX2N-485-BD

FX2N-422-BD

FX2N-232-BD

FX1N-485-BD

FX1N-422-BD

FX3U-485-BD

FX3U-422-BD

FX3U-232-BD

FX3U-USB-BD

1747-PIC

1747-UIC

1747-CP3

USB-1747-CP3 

1761-CBL-PM02

USB-1761-CBL-PM02

 

Pictures for your reference:

FX1N-USB-BD-1 FX3U-232-BD FX2N-USB-BD-1 USB-CN226 _1 USB-CIF02_1 TSXPCX3030_1 IC690USB901_1 IC690ACC901_1 USB-1761-CBL-PM02_1 1747-PIC_1 1747-UIC_1 USB-SC09_1 USB-QC30R2 1 ES-ETH-SC09 1 USB-SC09-FX_1 FX-USB-AW 1

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Leave a Reply