Sep 18 2013

Siemens 6ES7331-7PF01-0AB0 ANANLOG MODULE

  

  

  

  Introduction to 6ES7331-7PF01-0AA0

SIMATIC S7-300, ANALOG INPUT SM 331, OPT. ISOL.,2/3/4 WIRE, 8AI, RESISTANCE, PT100/200/1000 NI100/120/200/500/1000, CU10, PLUS CHARACTERISTICS ACCORDING TO GOST STANDARD 16 (INTERN 24) BIT, 50MS, 1 X 40 PIN
 
 
Data sheet of Siemens 6ES7331-7PF01-0AA0
Supply voltage
Load voltage L+
Rated value (DC) 24 V
Reverse polarity protection Yes
Input current
from load voltage L+ (without load), max. 240 mA
from backplane bus 5 V DC, max. 100 mA
Power losses
Power loss, typ. 4.6 W
Analog inputs
Number of analog inputs 8
Number of analog inputs for resistance measurement 8
permissible input voltage for voltage input (destruction limit), max. 75 V; 35 V continuous, 75 V for max. 1 s (mark to space ratio 1:20)
Input ranges
Voltage No
Current No
Thermocouple No
Resistance thermometer Yes
Resistance Yes
Input ranges (rated values), voltages
0 to +10 V No
1 to 5 V No
1 to 10 V No
-1 V to +1 V No
-10 V to +10 V No
-2.5 V to +2.5 V No
-250 mV to +250 mV No
-5 V to +5 V No
-50 mV to +50 mV No
-500 mV to +500 mV No
-80 mV to +80 mV No
Input ranges (rated values), currents
0 to 20 mA No
-10 to +10 mA No
-20 to +20 mA No
-3.2 to +3.2 mA No
4 to 20 mA No
Input ranges (rated values), thermoelements
Type B No
Type E No
Type J No
Type K No
Type L No
Type N No
Type R No
Type S No
Type T No
Type U No
Type TXK/TXK(L) to GOST No
Input ranges (rated values), resistance thermometers
Cu 10 Yes
Ni 100 Yes
Ni 1000 Yes
LG-Ni 1000 Yes
Ni 120 Yes
Ni 200 Yes
Ni 500 Yes
Pt 100 Yes
Pt 1000 Yes
Pt 200 Yes
Pt 500 Yes
Input ranges (rated values), resistors
0 to 150 ohms Yes
0 to 300 ohms Yes
0 to 600 ohms Yes
Resistance thermometer (RTD)
Characteristic linearization
for resistance thermometer Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni200, Ni500, Ni1000, Cu10; (standard/climate)
Characteristic linearization
Parameterizable Yes
Cable length
Cable length, shielded, max. 200 m
Analog value creation
Measurement principle integrating
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max. 16 bit; Two's complement
Integration time, parameterizable Yes
Basic conversion time, ms up to 4 channels: 10 ms per module, over 5 channels: 190 ms per module, 8 channels: 80 ms
Interference voltage suppression for interference frequency f1 in Hz 400 / 60 / 50 Hz
Encoder
Connection of signal encoders
for resistance measurement with 2-conductor connection Yes; without resistance correction
for resistance measurement with 3-conductor connection Yes
for resistance measurement with 4-conductor connection Yes
Errors/accuracies
Operational limit in overall temperature range
Impedance, relative to input area +/- 0,1 %
Resistance-type thermometer, relative to input area +/- 1 K
Basic error limit (operational limit at 25 °C)
Impedance, relative to input area +/- 0,05 %
Resistance-type thermometer, relative to input area +/- 0.5 K
Isochronous mode
Isochronous operation (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm Yes; Parameterizable per group
Limit value alarm Yes; Parameterizable
Diagnostic messages
Diagnostic functions Yes; Parameterizable
Diagnostic information readable Yes
Diagnostics Yes
Diagnostics indication LED
Group error SF (red) Yes
Galvanic isolation
Galvanic isolation analog inputs
between the channels No
between the channels, in groups of 2
between the channels and the backplane bus Yes
Isolation
Isolation checked with 500 V DC
Connection method
required front connector 40-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weights
Weight, approx. 272 g

 

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

 

Our company (Kollewin Technology CO., Limited) have a new product,

named 331-7PF01-0AA0,

it is 100% compatible with Siemens original part.

 

Part#: 331-7PF01-0AA0

Unit price:USD440.00/pc  buy buttom
Description: S7-300 Analog
module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

 

Here, you also need 1 piece of 40 pin front connector to connect with it..

Our compatible 6ES7 392-1AM00-0AA0 can meet your requirements.

 

6ES7 392-1AM00-0AA0  @USD16.90/pc   buy buttom

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

331-7PF01-0AB0
 
Discriptions of our compatible OEM 331-7PF01-0AA0

Model

SM331

8AI RTD

Product  Description

8AI;

RTD temperature measurement modules; stable

Power consumption

·Rate value

24V DC

·From backplane bus current consumption

50mA

·From L+

40mA

·Power loss

1W

The power of transmitter

 

·Supply current

/

·short-circuit protection

/

Number of analog inputs

8

Cable Length (Shielded)

Max:200m

Input type and input range

 

·voltage

/

·current(4wire)

/

·current(2wire)

/

·tesistance

150Ω, 300Ω, 600Ω,

·thermocouple

/

·RTD

Pt10、 Pt50、Pt100, Pt200、
Pt500、 Pt1000、 Ni100、
Ni120 、Ni200,Ni500 、
Ni1000 、Cu10(9.035) 、
Cu50、Cu100

A/D resolution

16bits

Basic conversion time(per channel)

190ms

Interference frequency suppression

400/50/60Hz

Tolerance(Over entire temperature range)

·Voltage

/

·Current

/

·resistance

±0.1%

·temperature

±1℃

Interrupts

Diagnostic interrupt

Per group Yes,Configurable

Limit-value interrupt

Yes,Configurable

Isolation tested for contact

·Between channels

Yes

·Between channels and backplane bu

Yes

Front connector

40-pin

Dimensions(W x H x D)(mm)

40×125×120

Order Number

    331-7PF01-0AB0

 

More compatible Siemens S7-200/300 modules we can offer:

Model Product Description
SM7-200 DIGITAL MODULE
  6ES7221-1BH22-0XA0 EM221 16 DI 24V DC
  6ES7221-1BL22-0XA0 EM221 32 DI 24V DC
  6ES7222-1BF22-0XA0 EM222 8DO,DC 24V
  6ES7222-1HF22-0XA0   EM222 8DO,relay
  6ES7222-1BH22-0XA0 EM222 16 DO 24V DC
  6ES7222-1HH22-0XA0 EM222 16 DO RELAY
  6ES7222-1BL22-0XA0 EM222 32 DO 24V DC
  6ES7223-1HF22-0XA0 EM223 4DI/4DO,DC 24V relay
  6ES7223-1BH22-0XA0 EM223 8 DI/ 8 DO 24V DC
  6ES7223-1PH22-0XA0 EM223 8 DI 24V DC/8 DO RELAY
  6ES7223-1BL22-0XA0 EM223 16 DI/ 16 DO 24V DC
  6ES7223-1PL22-0XA0 EM223 16 DI 24V DC/ 16 DO RELAY
  6ES7223-1BF22-0XA0 4 DI/4DO,24 VDC
  6ES7221-1BF22-0XA0 8 DI,24V DC
SM7-200 ANALOG MODULE
  6ES7231-0HC22-0XA0 EM231 4 AI x 12 Bits
  6ES7231-0HF22-0XA0 EM231 8 AI x 12/11 BIT 
  6ES7231-7PC22-0XA0 EM231 4 RTD
  6ES7231-7PD22-0XA0 EM231 4 TC
  6ES7231-7PH22-0XA0 EM231 8 TC
  6ES7231-7PL22-0XA0 16AI, T/C INPUT MOD, 16BIT
  6ES7231-7PB22-0XA0 2AI, RTD INPUT MOD. 16BIT 
  6ES7232-0HB22-0XA0 EM232 2 AO x 12 Bits
  6ES7232-0HD22-0XA0 EM232 4 AO x 12 Bits
  6ES7235-0KD22-0XA0 EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
  6ES7321-1BH02-0AA0 SM321 16 DI 24 VDC
  6ES7321-1FH00-0AA0 SM321 16 DI  AC 230V
  6ES7321-1BL00-0AA0 SM321 32 DI 24 VDC
  6ES7322-1BF01-0AA0 SM322,8DO,24VDC,2A
  6ES7322-1BH01-0AA0 SM322 16 DO 24 VDC/ 0.5A
  6ES7322-1HH01-0AA0 SM322 16 DO RELAY
  6ES7322-1BL00-0AA0 SM322 32 DO 24V DC/0.5A
  6ES7323-1BL00-0AA0 SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
  6ES7331-1KF01-0AB0 SM331 8 AI x 13 Bits
  6ES7331-7KF02-0AB0 SM331 8 AI X 14 Bits
  6ES7331-7PF01-0AB0 SM331 8 AI,RTD
  6ES7331-7PF11-0AB0 SM331 8 AI,TC
  6ES7332-5HD01-0AB0 SM332 4 AO x 12 Bits
  6ES7332-5HF00-0AB0 SM 332 8 AO x 12 BITS
SIMATIC DP  IM 153 
  6ES7153-1AA03-0XB0 SIMATIC DP, INTERFACE
IM 153-1, FOR ET 200M,
FOR MAX. 8 S7-300 MODULES
  6ES7365-0BA01-0AA0 IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

 

More pictures for your reference:

3311kf01-00 3311kf01 331-1KF01 product 321-1BL00 S7-200 322-1BL00 322-1BH02 S7-300 331-7KF02-0AB0 332-5HD01-0AB0 321-1BL00 3211bl00 6ES7322-1BL00 321-1BH02-0AA0 321-1BH02-0AA0

 

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Leave a Reply