CP5611-A2 card for Siemens 6GK1561-1AA01

nancy — Sat, 17 Aug 2013 07:55:57 +0000

Introduction to 6GK1561-1AA01 (CP5611-A2)

COMMUNICATION PROCESSOR CP 5611 A2 PCI-CARD (32 BIT; 3.3/5V;33/ 66 MHZ) FOR CONNECTION TO PG OR PC WITH PCI-BUS TO PROFIBUS OR MPI (NO WIN9X-SUPPORT!) CURRENTLY ONLY 32BIT SUPPORT IN CONNECTION WITH SIMATIC NET V8.2 SW!

Data sheet of 6GK1561-1AA01.

Product-type designation	CP 5611 A2
	COMMUNICATION PROCESSOR CP 5611 A2 PCI-CARD (32 BIT; 3.3/5V;33/ 66 MHZ) FOR CONNECTION TO PG OR PC WITH PCI-BUS TO PROFIBUS OR MPI (NO WIN9X-SUPPORT!) CURRENTLY ONLY 32BIT SUPPORT IN CONNECTION WITH SIMATIC NET V8.2 SW!
Transmission rate
Transmission rate
at interface 1 / in accordance with PROFIBUS
minimum	9.6 kbit/s
maximum	12 Mbit/s
Interfaces
Number of electrical connections / at interface 1 / in accordance with PROFIBUS	1
Design of electrical connection / at interface 1 / in accordance with PROFIBUS	9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss
Type of voltage	DC
Supply voltage
1 / from backplane bus	5 V
Relative symmetrical tolerance
at 5 V / with DC	5 %
Consumed current
1 / from backplane bus / with DC / maximum	0.5 A
Resistive loss	2.5 W
Permitted ambient conditions
Ambient temperature
during operating	5…55 °C
during storage	-20…+60 °C
during transport	-20…+60 °C
Relative humidity
at 25 °C / without condensation / during operating / maximum	95 %
Protection class IP	IP00
Design, dimensions and weight
Width	18 mm
Height	102 mm
Depth	130 mm
Net weight	100 g
Product properties, functions, components / general
Number of plug-in cards in the same design / can be plugged in / per PC station	1
Number of modules / note	-
Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum	50
Software / for DP master function / required	Yes, SOFTNET-PB DP
Service / as DP master
DPV0	Yes
DPV1	Yes
DPV2	No
Number of DP slaves / on DP master / usable	64
Amount of data
of the address area of the inputs / as DP master / overall	14640 byte
of the address area of the outputs / as DP master / overall	14640 byte
of the address area of the inputs / per DP slave	244 byte
of the address area of the outputs / per DP slave	244 byte
of the address area of the diagnostic data / per DP slave	244 byte
Service / as DP slave
DPV0	Yes
DPV1	No
Amount of data
of the address area of the inputs / as DP slave / overall	122 byte
of the address area of the outputs / as DP slave / overall	122 byte
Number of possible connections / for S7/PG communication / maximum	8
Number of configurable connections / per PC station	207
Configuration software / required	NCM PC is included in scope of delivery of the required software product
Product function / Port diagnostics	Yes
Standards, specifications, approvals
Standard
for EMC	89/336/EEC
for safety / of CSA and UL	CAN/CSA C22.2 & UL 60950-1, UL 1950
for emitted interference	EN 61000-6-3
for interference immunity	EN 61000-6-2
Verification of suitability
CE mark	Yes
C-Tick	Yes
Accessories
Accessories	optional: MPI cable

More details of CP5611-A2, please find in below data sheet:

CP5611-A2 communication card 6GK1561-1AA01

Our company (Kollewin Technology CO., Limited) have a new product,

named CP5611-A2.

It is 100% compatible with Siemens original part.

Part#: CP5611-A2

EX-Work Price: $259.00/pc

User's manual PDF of CP5611-A2 communication card 6GK1561-1AA01:

CP5611-A2 communication card 6GK1561-1AA01

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Description of our compatible communication card CP5512-A2:

CP5611-A2 communications cards which is Anti-lightning and anti-surge, corresponding to the Siemens 6 GK1 561-1AA01, photoelectric isolation, and applied to desktop computer's PCI slots, to achieve the PROFIBUS DP / MPI / PPI communications between PC or PG and the SIMATIC network, communication rate is 9.6 Kbps ~ 12Mbps.

Not made by Siemens,OEM product

Not including MPI extension cable for card communication,if you also need this,please also order it:

MPI Cable

Overview of communication card CP5611-A2:
CP5611-A2 communication card is optoelectronic isolated design for industrial applications.There is anti-lightning & anti-surging protection circuit and over-current protection on the RS485 port.The adoption of industrial chip applies to a wide temperature range. CP5611-A2 card is used to achieve the PROFIBUS DP / MPI / PPI communication between PC or PG and the SIMATIC network.

Communication services:
PROFIBUS-DP master grade 1 and 2
PROFIBUS-DP slave and SOFTNET-DP slave
MPI/PPI communication
PG/OP communication
S7 communication with SOFTNET-S7

S5-compatible communication (SEND/RECEIVE based on the FDL interface) with SOFTNET-DP or SOFTNET-S7

CP5611-A2 applies to the following software:
STEP7 V.52 and above
SOFTNET-S7
SOFTNET-DP
SOFTNET-DP slave
COM PROFIVUS V3.3 and above
STEP 7-Micro/WIN V3.1 and above
ProTool, ProToo/Pro
NCMPC

Technical specifications of communication card CP5512-A2:

Transmission rate:9.6Kbps~12Mbps, corresponding maximum communication distance conforms to PROFIBUS standard
Interface: PROFIBUS/MPI/PPI, isolated 9-pin Sub-D socket
Isolation Voltage: 1000VDC
RS485 port with anti-lightning and anti-surging protector, repeatability surge capacity: Ipp = 100A (10/700us, 4KV)
Standard: ITU-TK20/21, VDE 0433. ± 15KV ESD (ESD) protection
Over-current protection: RS485 interface can withstand up to 60V voltage caused by the sustained over-current
PG/PC connection: PCI2.1 standard slot
Standard voltage: +5 VDC
Power: 2.0W
Operating temperature: 0 ~ + 70 'C
Size (width x high) (mm): 102 x 130
Weight: 100g

We also have other compatible PLC Programming cables of Siemens

CP5611

CP5611-A2

CP5512

CP5512EXP-NEW

PC Adapter CN-NEW

ES-ETH-PPI-NEW

ETH Adapter CN-NEW

USB/PPIM+

PC/PPI

PC/PPI+

USB/MPI+ V4.0

USB/MPI+ V2.0

PC/MPI+ including RS232 cable

PC/MPI

LOGO!USB-CABLE

LOGO!PC-CABLE

MPI extension cable

PC/TTY

Here, more pictures of our compatible cables of Siemens parts

Of course, we also supply some other brands compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

ES-ETH-SC09-NEW

FX-USB-AW

USB-SC09

USB-SC09-FX

SC-09+

SC-10

USB-QC30R2

FX2N-485-BD+

FX2N-485-BD

FX2N-422-BD

FX2N-232-BD

FX1N-485-BD