Profibus Connector &#187; Mitsubishi PLC programming cable

USB/PPIM+

PC/PPI

PC/PPI+

PC/MPI

PC/TTY

1747-PIC

1747-UIC

1747-CP3

More pictures:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

QC30R2 Mitsubishi RS232 Programming Cable

nancy — Sat, 12 Oct 2013 02:07:56 +0000

Introduction to QC30R2

RS232/RS232 interface,cable for Mitsubishi Q series PLC,3 meters.Not isolated,so it doesn't support hot plug,if need isolated cable,

pls choose QC30R2+,you can click it :QC30R2+

Part#: QC30R2

Unit price:USD16.00/pc

More compatible Mitsubishi cable & communication board

FX-USB-AW

SC-09+

SC-10

FX2N-4DA

Pictures for your reference:

Of course, we also can supply some compatible PLC Programming cables of ohter brands, such as Siemens/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

CP5611

CP5611-A2

CP5512

USB/PPIM+

PC/PPI

PC/PPI+

PC/MPI

PC/TTY

1747-PIC

1747-UIC

1747-CP3

More pictures:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

USB-QC30R2 Mitsubishi adapter cable

nancy — Fri, 11 Oct 2013 06:41:23 +0000

Introduction to USB-QC30R2

USB-QC30R2 is the programming cable in which USB interface provides both the serial connection and RS232 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.
USB-QC30R2 is applicable to Mitsubishi Q series PLC (Q mode)

USB-QC30R2 principle and figure structure:

USB-QC30R2 programming cable simulate USB port as traditional serial port (usually COM3), which enables existing programming software(GX Developer) to communicate through simulated traditional port and PLC devices.

Functions of USB-QC30R2
● Support USB-QC30R2 programming software version: GPP V4.0, GX Developer V7.0 and above.
● Fully compatible with USB V1.1 norms and USB CDC V1.1
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 'C
● Color: black

Setting of GX Developer
Please set the driver procedure according to the following steps:
1. Turning on PC power that will connect the USB programming cable and make sure the USB port working well.
2. Put the USB programming cable into USB port and Windows will detect the device and help to add new hardware and jump to new device setting. Insert the driver CD and click “next” to continue, or select the driver on the hard disk.
If Windows does not show “find new hardware”, please click “Universal Serial Main Cable controllers” in the hardware list of device manager, and choose the USB device with question mark. Click the right key of mouse and operate to update driver procedure.

If insert the driver CD,you should select the recommended item and click “Next”.

If the driver is saved on the hard disk, you should select the second item and click “Next”. You can find the driver on the “USB Drivers1” folder.

3. Windows will detect the setting information, and load the driver to install.

4. Continue to set up, copy the driver procedure files to your hard disk by Windows.

5. When Windows appears “Completing the Found New Hardware Wizard”, click “finish” to end setting up.
6. After setting up, please make sure the "Ports (COM and LPT)" of "Start \ Settings \ Control Panel \ system \ hardware \ Device Manager" appears "USB Serial Port(COMx)". This COMx is the COM port of the USB programming cable. From then on, as long as you insert the programming cable, the COM port will appear. You just have to choose this COM port in application software such as programming software or communication software.

How to change COM setting
1. Delete the driver procedure of all USB to UART products to discharge COM port source, and reset up USB programming cable driver procedure. The device manager will display the cable address COM3.
2. In Windows 2000/XP the COM slogan can be changed directly. Please double click COM port device that is need changing in the device manager, and the device attribute information window will appear. Choose “port setting” as the picture shows. Click "Advanced" button, and the advanced setting information window will appear. Set the COM port to the serial number you want and click "OK" button to complete.

Setting of GX Developer
After completing Driver installation, the corresponding COM port for the USB-QC30R2 programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.
Open the main windows form(GX Developer)， choose “Online” menu then click “Transfer Setup…” and will appear “Transfer Setup” window.
Click “Serial” button of the PC side I/F, and choice the COM X interface as it in the Device Manager.

About Long Distance Communication
USB-QC30R2 doesn’t support long distance communication.

Notes and Troubleshoot:
1. If the USB programming cable could not be detected when opening the PC, or some other outstanding issues occur, please replug it again.
2.USB to UART is plug and play USB device. When data are being transmitted, please don’t disconnect it.
3.Sometimes when Windows System failures or outstanding issues when plug or unplug the USB cable occur, please restart the computer and PLC.

Part#: USB-QC30R2

Unit price:USD39.00/pc

More compatible Mitsubishi cable & communication board

FX-USB-AW

SC-09+

SC-10

FX2N-4DA

Pictures for your reference:

Of course, we also can supply some compatible PLC Programming cables of ohter brands, such as Siemens/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

CP5611

CP5611-A2

CP5512

USB/PPIM+

PC/PPI

PC/PPI+

PC/MPI

PC/TTY

1747-PIC

1747-UIC

1747-CP3

More pictures:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

SC-10 Mitsubishi communication cable

nancy — Thu, 10 Oct 2013 06:37:36 +0000

Introduction to SC10

PLC remote communication with modem,go on long-distance communication for FX series(FX2/FX2n/FX0/FX0n..)PLC with modem connecting telephone wire,the other function is the same as SC-09.

Part#: SC10

Unit price:USD78.00/pc

More compatible Mitsubishi cable & communication board

FX-USB-AW

SC-09+

SC-10

FX2N-4DA

Pictures for your reference:

Of course, we also can supply some compatible PLC Programming cables of ohter brands, such as Siemens/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

CP5611

CP5611-A2

CP5512

USB/PPIM+

PC/PPI

PC/PPI+

PC/MPI

PC/TTY

1747-PIC

1747-UIC

1747-CP3

More pictures:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

SC-09+ Mitsubishi RS232/RS422 adapter

nancy — Wed, 09 Oct 2013 06:33:48 +0000

Introduction to SC09+

SC-09 PLUS OPERATING INSTRUCTIONS

RS232C TO PROGRAMMABLE CONTROLLER ISOLATED CONVERTER INTERFACE FOR? MITSUBISHI ELECTRIC MELSEC-PC & FUJI ELECTRIC FLEX-PC

_____________________________________________________________________________________________

Before using this interface unit , be sure to read this OPERATING INSTRUCTIONS thoroughly to ensure proper operation.

This unit is the dedicated specified cable to connect the personal computer to the MITSUBISHI ELECTRIC MELSEC-PC or FUJI ELECTRIC FLEX-PC N-series.

The Personal Computer side :

. IBM AT personal computer or 100% compatible

. MS-DOS version 3.2 or higher

. 640KB RAM

. min. 10MB Hard Disk

. RS232C Serial port

Software Package :

. MEDOC/SFC/FX-MING for MITSUBISHI ELECTRIC MELSEC-PC

The Programmable Controller side :

For PC/PERSONAL COMPUTER communication,the following external equipment is required :

For MITSUBISHI ELECTRIC MELSEC-PC:

FX2 / FX2C… —- SC-09+

FX0 / FX0s / FX0n / FX2n … —- SC-09+ and FX-20P-CADP

A series —- SC-09+

General Specifications :

Cooling method : Self-cooled

Operating temperature and humidity : -15 oC to 75 oC, 20% to 95%(RH) (no condensation)

Storage temperature : -30 oC to +85 oC

Power supply : Non-powered

Max. Speed : 110Kbps

Max. Line length : 2km(9600bps) using gauge wire

Isolated voltage: 2.5kV

Weight : Approx . 150g

Cable length : 2m

Part#: SC09+

Unit price:USD78.00/pc

More compatible Mitsubishi cable & communication board

FX-USB-AW

SC-09+

SC-10

FX2N-4DA

Pictures for your reference:

Of course, we also can supply some compatible PLC Programming cables of ohter brands, such as Siemens/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

CP5611

CP5611-A2

CP5512

USB/PPIM+

PC/PPI

PC/PPI+

PC/MPI

PC/TTY

1747-PIC

1747-UIC

1747-CP3

More pictures:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

SC-09 Mitsubishi RS232 cable

nancy — Tue, 08 Oct 2013 06:29:10 +0000

Introduction to SC09

Red Standard programming cable for all MELSEC FX and A series PLC's.

RS232/RS422 Connector,3 meters length

with indicator,copy original one

Part#: SC09

Unit price:USD39.00/pc

More compatible Mitsubishi cable & communication board

FX-USB-AW

SC-09+

SC-10

FX2N-4DA

Pictures for your reference:

Of course, we also can supply some compatible PLC Programming cables of ohter brands, such as Siemens/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

CP5611

CP5611-A2

CP5512

USB/PPIM+

PC/PPI

PC/PPI+

PC/MPI

PC/TTY

1747-PIC

1747-UIC

1747-CP3

More pictures:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

USB-SC09-FX Mitsubishi USB/RS422 adapter

nancy — Mon, 07 Oct 2013 03:42:49 +0000

Introduction to USB-SC09-FX

USB/RS422 interface,adapter for Mitsubishi FX2N/FX1N/FX0/FX0S/FX1S/FX3U series PLC,2.5 meters,with communication indicator, the largest communication distance of up to 2 kilometers. Compatible with FX-USB-AW.

USB-SC09-FX is the programming cable in which USB interface provided both the serial connection and RS232 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.

USB-SC09-FX is applicable to the FX series PLC which has the MD8F radio socket of Mitsubishi, such as FX2N/FX1N/FX0/FX0N/FX0S/FX1S/FX3U, and it can substitute the FX-232AW module. The largest communications distance is two kilometers.

Do choose the USB-SC09 programming cable, for all FX series Mitsubishi PLC (including the old products FX2/FX2C).

Outline configuration of USB-SC09-FX:

Features and technological index:

● Support USB-SC09-FX programming software version: FXGP / WIN V1.0, GPP V4.0, GX Developer V7.0 and above.
● Fully compatible with USB V1.1 norms and USB CDC V1.1
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
● Support long-distance communications, the largest communications is two kilometers (9600 bps)
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 'C
● Cable length: 2.5m; Color: black

Usage of USB-SC09-FX:

USB device drivers should be installed before using USB-SC09-FX programming cable.

After completing Driver installation, the corresponding COM port for the USB-SC09-FX programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.

Long-distance communications:

the largest communications range between the USB-SC09-FXprogramming cable and the PLC is up to two kilometers (9600 bps).The user must follow the self-made plans to extend cable. Transmission Line should be 0.22mm2 or more, twisted pair wire. When the distance is over 2,000 m , RS422 repeater (model: E485GA)could be installed to extend the distance.

Please Note: USB interface cable cannot be extended.

Due to internal resistance have been installed in USB-SC09-FX and the PLC, no external terminal resistance is needed.

The quality is guaranteed.It's tested before shippment.Not made by Mitsubishi,OEM product as the replacement

Part#: USB-SC09-FX

Unit price:USD35.00/pc

More compatible Mitsubishi cable & communication board

FX-USB-AW

SC-09+

SC-10

FX2N-4DA

Pictures for your reference:

Of course, we also can supply some compatible PLC Programming cables of ohter brands, such as Siemens/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

CP5611

CP5611-A2

CP5512

USB/PPIM+

PC/PPI

PC/PPI+

PC/MPI

PC/TTY

1747-PIC

1747-UIC

1747-CP3

More pictures:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

USB-SC09 Mitsubishi USB/RS422 adapter

nancy — Sun, 06 Oct 2013 03:29:40 +0000

Introduction to USB-SC09

Mitsubishi PLC Programming Replacement Cable USB SC09
USB Cable for Mitsubishi MELSEC FX and A series PLC. 8 pin DIN connector and DB-25 connector. Designed for computers without a serial port. This cable is an OEM replacement and not made by Mitsubishi.

USB-SC09 is the programming cable in which USB interface provides both the serial connection and RS422 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates dataï¿½s transceiving status.

USB-SC09 principle and figure structure:

Functions of USB-SC09
● Support USB-SC09 operating system: Windows2000/XP(WinNT4/95/98/Me/DOS not support )
● Support USB-SC09 programming software version: FXGP / WIN V1.0,GPP V4.0, GX Developer V7.0 and above.
● Fully compatible with USB V1.1 norms and USB CDC V1.1
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baudrate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd /even / no parity
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 ℃
●Color: black

Usage of USB-SC09:

USB device drivers should be installed before using USB-SC09 programming cable. After completing Driver installation, the corresponding COM port for the USB-SC09 programming cable will be displayed in the "Device Manager" of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.

Note: DB25M plugs and MD8M plugs of the RS422 interface can not be used at the same time.

Part#: USB-SC09

Unit price:USD39.00/pc

More compatible Mitsubishi cable & communication board

FX-USB-AW

SC-09+

SC-10

FX2N-4DA

Pictures for your reference:

Of course, we also can supply some compatible PLC Programming cables of ohter brands, such as Siemens/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

CP5611

CP5611-A2

CP5512

USB/PPIM+

PC/PPI

PC/PPI+

PC/MPI

PC/TTY

1747-PIC

1747-UIC

1747-CP3

More pictures:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

ES-ETH-SC09 Mitsubishi Ethernet adapter

nancy — Sun, 06 Oct 2013 03:20:47 +0000

Introduction to ES-ETH-SC09

Mitsubishi FX series PLC Ethernet adapter,is used for the communication between FX series PLC and Ethernet,Internet or 3G wireless network by the programming interface.No need to revise the communication protocol and software,support Dynamic DNS,user can remote control the PLC by the internet. The RJ45 port and RS422 interface are isolated in order to suit harsh environment in the industrial scene.

ES-ETH-SC09 is the industrial product which use the Ethernet and Internet or 3G wirelss internet to achieve Mitsubishi FX series PLC networking communication It integrates a number of complex network protocols, supports TCP Server, TCP Client, UDP unicast, UDP multicast etc many modes,.It has 10M/100M adaptive Ethernet interface and RS422 interface which meets Mitsubishi technical specifications, You only need to go on simple setting and then let the FX PLC go on Ethernet/Internet communication.

Mitsubishi FX Series PLC refers to FX0/FX0S/FX0N/FX1N/FX2N/FX3U/FX3G … …. .

ES-ETH-SC09 is an industrial grade product, its RJ45 port and RS422 interface are both isolated in order to suit harsh environment in the industrial situations. Especially each signal pin has anti-static protection and surge protection, which can effectively protect the PLC communication port from outside surges and the impact of common-mode inductance.

Notice:when the ES-ETH-SC09 is used to communicate between the PC and the FX series PLC or between PLC and PLC, it supports the RS422/RS485/RS232 communication which meet UART serial data communication standard. Some field buses such as PROFIBUS, PPI, MPI, CC-Link, PC-Link, etc., although the physical interface is RS485, they do not comply with the UART serial data format, so they do not apply to this product!
◆ High-speed, highly reliable industrial-grade standard, anti-interference design for harsh electromagnetic environment

◆ 32 bit RISC (NP7 series) ARM7TDMI 55DMIPS

◆ 128KB SRAM，128KB Code + 32KB Boot

◆10M/100M adaptive Ethernet interface

◆Support RS422/RS485 data bits 5,6,7,8 settable

◆Support RS422/RS485 stop bit 1,1.5,2 settable
◆Support RS422/RS485 parity NONE, ODD, EVEN, MARK, SPACE settable
◆Support RS422/RS485 baud rate 110 ~ 115200bps standard rate settable
◆Support the RS422/RS485 communications which meet UART serial data communication standard, do not support field bus protocol.
◆Smart protocols: TCP, UDP, ARP, IP, ICMP, DHCP, BOOTP, DNS

◆Support dynamic DNS
◆Working mode can be TCP Server, TCP Client, UDP multicast and unicast UDP

◆Built-in Flash memory, can save the setted parameters
◆Support Windows 95/98/ME/NT/2000/XP/2003/XP/Win7 operating system, Vista is not recommended
◆RJ45 port 1500VDC electromagnetic isolated,RS422 interface 1500VDC electromagnetic isolated,
◆Interface protection: power supply port has the reverse polarity protection and over current protection, RS422 interface has the surge protection ;all pins and terminals have anti-static protection.
◆5V±10% DC power supply from FX series PLC RS422 socket,1W power
◆Dimension: L × W × H = 65mm × 51mm × 26mm, 35mm Standard rail mounting
◆Operating Temperature: -40 ° C to +80 ° C (-40 ° F to 176 ° F), 5% to 95% RH (industrial grade)
◆Storage Temperature: -40 ° C to +80 ° C (-40 ° F to 176 ° F), 5% to 95% RH

Product Content:
1.ES-ETH-SC09 1PC
2. RJ45 Cable 1 PC,2 M
3.CD 1PC

Part#: ES-ETH-SC09

Unit price:USD150.00/pc

More compatible Mitsubishi cable & communication board

FX-USB-AW

SC-09+

SC-10

FX2N-4DA

Pictures for your reference:

Of course, we also can supply some compatible PLC Programming cables of ohter brands, such as Siemens/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

CP5611

CP5611-A2

CP5512

USB/PPIM+

PC/PPI

PC/PPI+

PC/MPI

PC/TTY

1747-PIC

1747-UIC

1747-CP3

Mitsubishi FX-USB-AW FX3U series USB-RS422 PLC programming interface cable– USER'S MANUAL

More pictures:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Mitsubishi FX-USB-AW RS-422/USB cable

nancy — Thu, 27 Jun 2013 09:41:45 +0000

Introduction to Mitsubishi FX-USB-AW

The FX-USB-AW is a RS-422/USB conversion interface unit to connect the FX series PLC to a personal computer.

Mitsubishi FX series USB PLC programming interface conversion cable.USB/RS422 interface for Mitsubishi FX3U/FX2N/FX1N/FX0/FX0S/FX1S series PLC, with communication indicator, the largest communications range is up to 2Km.

1.1 Incorporated Items of Mitsubishi RS-422/USB FX-USB-AW interface cable
Check if the following product and items are included in the package:

Product	FX-USB-AW type interface unit
Included items	USB driver software (CD-ROM) USB cable (3m (118.1")) User's Manual (this manual)

1.2 External Dimensions and Part Names of Mitsubishi RS-422/USB FX-USB-AW interface cable

Specification of Mitsubishi RS-422/USB FX-USB-AW interface cable

INSTALLATION PRECAUTIONS to Mitsubishi RS-422/USB FX-USB-AW interface cable

• Use the product in the environment within the general specifications described in PLC main unit manual (Hardware Edition).
Never use the product in areas with dust, oily smoke, conductive dusts, corrosive gas (salt air, Cl2, H2S, NH3, SO2, or NO2), flammable gas, vibrations or impacts, or expose it to high temperature, condensation, or wind and rain.
If the product is used in such a place described above, electrical shock, fire, malfunction, damage, or deterioration may be caused.

2.1 General Specifications of Mitsubishi RS-422/USB FX-USB-AW interface cable
General specifications are the same as the PLC main unit.
For general specifications, refer to the PLC main unit manual.

2.2 Performance Specifications of of Mitsubishi RS-422/USB FX-USB-AW interface cable

Current consumption		15mA / DC 5V (supplied by DC 5V power of programmable controller) 30mA / DC 5V (supplied by USB connector of personal computer)
Level Conversion		Bidirectional between RS-422 and USB
Baud Rate		115200 bits per second, maximum (The baud rate is different in PLC.)
Conforming standard		USB2.0 (For full speed)
Signal name (Port)	To PLC	RS-422 (MINI DIN 8Pin male)
	To a cable	USB (MINI B plug female)

2.3 USB Cable Specifications of Mitsubishi RS-422/USB FX-USB-AW interface cable

Signal name (Port)	To FX-USB-AW	USB (MINI B plug male)
Signal name (Port)	To PC	USB (A plug male)
Length of cable		5m (196.9") at most (Included cable is 3m(118.1").)

2.4 System Requirements of Mitsubishi RS-422/USB FX-USB-AW interface cable

System Configuration of Mitsubishi RS-422/USB FX-USB-AW interface cable

Connected equipment and connected cable of Mitsubishi RS-422/USB FX-USB-AW interface cable

*1 FX1NC / FX3UC Series PLC specification details for I/O, wiring,
installation, and maintenance can only be found in the Japanese Manual.
• Please refer to the specific PLC manual for a PLC not mentioned above.

Connecting Procedure of Mitsubishi RS-422/USB FX-USB-AW interface cable
1) Power off the PLC.
2) Connect the USB (MINI B plug male) connector of the USB cable to the FX-USBAW.
3) Connect the RS-422 (MINI DIN 8Pin male) connector of the FX-USB-AW to the PLC.
4) Connect the USB (A plug male) connector of the USB cable to the Personal computer.
5) Turn ON the power supply of the PLC.
6) Turn ON the power supply of the Personal computer.
7) Make sure the POWER lamp of the FX-USB-AW is lit.
(The POWER lamp of FX-USB-AW lights when power is supplied normally by the personal computer.)

Driver Installation of Mitsubishi RS-422/USB FX-USB-AW interface cable

Procedure for installing the driver is explained below.
Windows XP installation follows.
• Windows 98, Windows 98SE, Windows Millennium Edition, and Windows 2000, the installation method will vary.
Installation of the driver is canceled during the following process, the installation is not carried out correctly.
If the installation is canceled, uninstall the driver and install again.
Please refer to Chapter 7 for instructions on uninstalling the driver.

Please install the driver with the following procedure.
1)When the USB cable is connected to the personal computer, the following screen is displayed. (Installation of the software for FX-USB-AW)

Insert the included CD-ROM into the personal computer's CD-ROM drive.
Click [ Next > ].
The installation of the FX-USB-AW software will begin.
- If using Windows 98, Windows 98SE, Windows Millennium Edition, and
Windows 2000, A window to select the location of the installation files.
Please select the CD-ROM drive.
2) The following screen is displayed. (Only in Windows XP)

Click [ Continue Anyway ].
3) The following screen is displayed.

Click [ Finish ].
The installation of the FX-USB-AW software will finish.
- If Windows 98, Windows 98SE or Windows Millennium Edition is used,
installation of the USB Serial Port software begins, and ends automatically.
The CD-ROM can be removed from the personal computer at this time.
- If using Windows 2000 or Windows XP, proceed to step 4).

4) The following screen is displayed.

Click [ Next > ].
The installation of the USB Serial Port software will begin.
- If using Windows 2000, a screen to select the location of the installation
files is displayed.
Please select the CD-ROM drive.
5) The screen of 2) is displayed. (Only in Windows XP)
Click [ Continue Anyway ].
6) The following screen is displayed.

Click [ Finish ].
The installation of the USB Serial Port software will finish.
The CD-ROM (USB driver software) can be removed from the personal computer at this time.

USER'S MUNUAL of Mitsubishi RS-422/USB FX-USB-AW interface cable:

Our company (Kollewin Technology CO., Limited) have a new product, named FX-USB-AW.

It is 100% compatible with Mitsubishi original FX-USB-AW.

Part#: FX-USB-AW

The unit price is USD35.00/pc

Approx. Weight: 0.3Kg
Manufacturer: Kollewin
Warranty: 1 year
Origin: China

USER'S manual of our FX-USB-AW RS-422/USB cable:

Mitsubishi RS-422USB conversion interface FX-USB-AW cable

Pictures of our compatible RS-422/USB FX-USB-AW interface cable:

Introduction to our compatible RS-422/USB FX-USB-AW interface cable

Mitsubishi FX series USB PLC programming interface conversion cable.USB/RS422 interface for Mitsubishi FX3U/FX2N/FX1N/FX0/FX0S/FX1S series PLC, 2.5 meters, with communication indicator, the largest communications range is up to 2Km.

Summary of our compatible RS-422/USB FX-USB-AW interface cable

FX-USB-AW is the programming cable in which USB interface provided both the serial connection and RS422 signal conversion. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.

FX-USB-AW is applicable to the FX3U series PLC which has the MD8F radio socket of Mitsubishi, such as FX3U/FX2N/FX1N/FX0/FX0N/FX0S/FX1S, and it can substitute the FX-232AW module. The largest communications distance is two kilometers.

Do choose the USB-SC09 programming cable, for A and all FX series Mitsubishi PLC (including the old products FX2/FX2C).

USB-SC09

Principle and figure structure of our RS-422/USB FX-USB-AW cable

FX-USB-AW programming cable simulate USB port as traditional serial port (usually COM3), which enables existing programming software(GX Developer)

to communicate through simulated traditional port and PLC devices.

Features and technological index of FX-USB-AW interface cable

● Support FX-USB-AW operating system: Windows2000/XP (WinNT4/95/98/Me/DOS not included )
● Support FX-USB-AW programming software version: FXGP / WIN V1.0, GPP V4.0, GX Developer V7.0 and above.● Fully compatible with USB V1.1 norms and USB CDC V1.1
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
● Support long-distance communications, the largest communications is two kilometers (9600 bps)
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 ℃
● Cable length: 2.5m; Color: black

System requirement of our RS-422/USB FX-USB-AW interface cable

Please make sure your PC is IBM PC compatible and has the following system

requirements before using the USB programming cable.

● Intel is compatible with 586DX4-100MHz CPU or higher

● A standard USB port (4-pin A plug)

● Operating system is Windows2000 or Windows XP

Setting of GX Developer

After completing Driver installation, the corresponding COM port for the FX-USB-AW programming cable will be displayed in the “Device Manager” of Window.

The next step is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings.

And the following steps are exactly the same as the traditional programming cables with RS232 interfaces. Note: DB25M plugs and MD8M plugs of the RS422 interface can not be used at the same time.

Open the main windows form(GX Developer)， choose “Online” menu then click “Transfer Setup…” and will appear “Transfer Setup” window.

Click “Serial” button of the PC side I/F, and choice the COM X interface as it in the Device Manager.

About Long Distance Communication

For FX-USB-AW,The largest communication distance is up to two kilometers

(9600 bps).The user must follow the self-made plan to extend cable.

Transmission Line should be 0.22mm or more, twisted pair wire. When the

distance is over 2,000 m,RS422 repeater could be installed to extend the

distance.

Please Note: USB interface cable cannot be extended.

Due to internal resistance have been installed in FX-USB-AW and the PLC, no

external terminal resistance is needed.

Usage of our RS-422/USB FX-USB-AW interface cable:

USB device drivers should be installed before using FX-USB-AW programming cable, which are available on the CD-ROM sold together with the cable. And for the specific installation steps, please refer to the instruction files on the CD-ROM drivers, and details are not necessarily listed here.

After completing Driver installation, the corresponding COM port for the FX-USB-AW programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.

Long-distance communications:

the largest communications range between the FX-USB-AW programming cable and the PLC is up to two kilometers (9600 bps)。The user must follow the self-made plans to extend cable. Transmission Line should be 0.22mm2 or more, twisted pair wire. When the distance is over 2,000 m , RS422 repeater could be installed to extend the distance.

Please Note: USB interface cable cannot be extended.

More compatible Mitsubishi cable & communication board

FX-USB-AW

SC-09+

SC-10

FX2N-4DA

Pictures for your reference:

Of course, we also can supply some compatible PLC Programming cables of ohter brands, such as Siemens/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

CP5611

CP5611-A2

CP5512

USB/PPIM+

PC/PPI

PC/PPI+