COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI

Data sheet of 6GK1551-2AA00

Product-type designation	CP 5512
	COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI
Transmission rate
Transmission rate
at interface 1 / in accordance with PROFIBUS
minimum	9.6 kbit/s
maximum	12 Mbit/s
Interfaces
Number of electrical connections / at interface 1 / in accordance with PROFIBUS	1
Design of electrical connection / at interface 1 / in accordance with PROFIBUS	9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss
Type of voltage	DC
Supply voltage
1 / from backplane bus	3.3 V
Relative symmetrical tolerance
at 3.3 V / with DC	5 %
Consumed current
1 / from backplane bus / with DC / maximum	0.52 A
Resistive loss	1.8 W
Permitted ambient conditions
Ambient temperature
during operating	5…45 °C
during storage	-20…+60 °C
during transport	-20…+60 °C
Relative humidity
at 25 °C / without condensation / during operating / maximum	95 %
Protection class IP	IP00
Design, dimensions and weight
Width	86 mm
Height	5 mm
Depth	54 mm
Net weight	130 g
Product properties, functions, components / general
Number of plug-in cards in the same design / can be plugged in / per PC station	1
Number of modules / note	-
Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum	50
Software / for DP master function / required	Yes, SOFTNET-PB DP
Service / as DP master
DPV0	Yes
DPV1	No
DPV2	No
Number of DP slaves / on DP master / usable	64
Amount of data
of the address area of the inputs / as DP master / overall	7808 byte
of the address area of the outputs / as DP master / overall	7808 byte
of the address area of the inputs / per DP slave	244 byte
of the address area of the outputs / per DP slave	244 byte
of the address area of the diagnostic data / per DP slave	244 byte
Service / as DP slave
DPV0	Yes
DPV1	No
Amount of data
of the address area of the inputs / as DP slave / overall	122 byte
of the address area of the outputs / as DP slave / overall	122 byte
Number of possible connections / for S7/PG communication / maximum	8
Number of configurable connections / per PC station	207
Configuration software / required	NCM PC is included in scope of delivery of the required software product
Product function / Port diagnostics	Yes
Standards, specifications, approvals
Standard
for EMC	2004/108/EC
for safety / of CSA and UL	CAN/CSA C22.2 & UL 60950-1
for emitted interference	EN 61000-6-3, EN 61000-6-4
for interference immunity	EN 61000-6-1, EN 61000-6-2
Verification of suitability
CE mark	Yes
C-Tick	Yes

More details of CP5512E, please find in below PDF file:

Communication card CP5512 Siemens S7-200-300-400 6GK1551-2AA00

User's manual PDF of CP5512Express card 6GK1551-2AA00:

CP5512 Express 6GK1551-2AA00

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Introduction to our CP5512 Express card:

Nowadays the laptops have eliminated the PCMCIA slot,but adopt the ExpressCard slot.So we especially develop the CP5512 EXPRESS for ExpressCard laptop.

ExpressCard CP5512,it’s suitable for Laptop Expresscard slot,is used to achieve PROFIBUS/MPI/PPI/FWLcommunication between PC and SIMATIC Net. Communication speed is 9.6Kbps–12Mbps.It can be also used for desktop computer after the conversion card.

Not inlcude the MPI extension cable,for MPI cable,please click this link to get: MPI Cable

The function of our CP5512 EXPRESS is the totally same as Siemens original CP5512 except they use on different laptop interfaces.It’s the isolated PROFIBUS/MPI/PPI/FWL communication card specially for laptop, use iCoupler Magnetic Coupling isolators to replace the optocoupler,with small  dimension, wide temperature range,and have anti-lightning and surging protective circuit and resumption of Overcurrent protection circuit on the RS485 interface, all use industrial IC in order to apply to wider temperature range, is used to achieve PROFIBUS/MPI/PPI/FWL communication connection between laptop and SIMATIC.

CP5512 EXPRESS also can be used on PCI-E slot of desktop computer after the PCI-E to ExpressCard converter, the function is same as Siemens CP5611,CP5621.

CP5512 EXPRESS support hot plug and plug and play. Perfect isolation circuit and interface protective circuit make you at ease to use it.

Communication service:                                                               

PROFIBUS-DP master station class 1 and 2
PROFIBUS-DP slave and SOFTNET-DP slave
MPI/PPI/FWL communication
S7 communication with SOFTNET-S7
S5-compatible communication (SEND/RECEIVE based on the FDL interface) with SOFTNET-D or SOFTNET-S7

CP5512 EXPRESS is suitable for the following version or above version softwares:
STEP7  V5.2
SOFTNET-S7  V6.1
SOFTNET-DP, SOFTNET-DP slave from V6.1
STEP 7-Micro/WIN from V3.2 SP4
ProTool^®, ProTool/Pro^® V6.0 SP2
NCM PC from V5.2
SIMATIC PDM V5.2 SP1

Technical Specification:                                                                           

Transmission rate: 9.6Kbps～12Mbps,the corresponding largest communication distance accord with PROFIBUS standard.
Interface:connect PROFIBUS/MPI/PPI,isolated 9 pin Sub-D connector.

Isolated voltage:1000VDC

Interface protection:have anti-lightning and surging protection(Ipp=100A 10/700us,4KV) on the RS485 interface.ITU-TK20/21,VDE 0433 standard. ±15KV ESD protection. Overcurrent protection with  restoration function：RS485 port can withstand up to 60V voltage caused by continuous over-current.

Standard working voltage:3.3 VDC
power：1.0W
working temperature：-20～+75℃
size：adapter:length* width * height(mm)：123×68×30,cable length:  25CM
weight：150g

Support hardware of CP5512 EXPRESS:

It’s different from PC Adapter and PC Adapter USB, CP5512 EXPRESS supports much more hardwares,such as Siemens S7-200/300/400PLC, PPI/MPI/PROFIBUS interface of touch panel, EM277,ET200 and other hardwares with PROFIBUS/MPI/PPI/FWL interface.

It need PROFIBUS cable or MPI cable(Siemens part nr 6ES7 901-0BF00-0AA0) when CP5512 EXPRESS communicates with fieldbus devices.

Signal definition of CP5512 EXPRESS profibus Interface(DB9F):

More compatible PLC Programming cables of Siemens

CP5611

CP5611-A2

CP5512

CP5512EXP-NEW

PC Adapter CN-NEW

ES-ETH-PPI-NEW

ETH Adapter CN-NEW

USB/PPIM+

PC/PPI

PC/PPI+

USB/MPI+ V4.0

USB/MPI+ V2.0

PC/MPI+ including RS232 cable

PC/MPI

LOGO!USB-CABLE

LOGO!PC-CABLE

MPI extension cable

PC/TTY

More pictures of our compatible cables of Siemens parts :

Other compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

ES-ETH-SC09-NEW

FX-USB-AW

USB-SC09

USB-SC09-FX

SC-09+

SC-10

USB-QC30R2

FX2N-485-BD+

FX2N-485-BD

FX2N-422-BD

FX2N-232-BD

FX1N-485-BD

FX1N-422-BD

FX3U-485-BD

FX3U-422-BD

FX3U-232-BD

FX3U-USB-BD

1747-PIC

1747-UIC

1747-CP3

USB-1747-CP3 

1761-CBL-PM02

USB-1761-CBL-PM02

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Data sheet of 6GK1551-2AA00

Product-type designation	CP 5512
	COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI
Transmission rate
Transmission rate
at interface 1 / in accordance with PROFIBUS
minimum	9.6 kbit/s
maximum	12 Mbit/s
Interfaces
Number of electrical connections / at interface 1 / in accordance with PROFIBUS	1
Design of electrical connection / at interface 1 / in accordance with PROFIBUS	9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss
Type of voltage	DC
Supply voltage
1 / from backplane bus	3.3 V
Relative symmetrical tolerance
at 3.3 V / with DC	5 %
Consumed current
1 / from backplane bus / with DC / maximum	0.52 A
Resistive loss	1.8 W
Permitted ambient conditions
Ambient temperature
during operating	5…45 °C
during storage	-20…+60 °C
during transport	-20…+60 °C
Relative humidity
at 25 °C / without condensation / during operating / maximum	95 %
Protection class IP	IP00
Design, dimensions and weight
Width	86 mm
Height	5 mm
Depth	54 mm
Net weight	130 g
Product properties, functions, components / general
Number of plug-in cards in the same design / can be plugged in / per PC station	1
Number of modules / note	-
Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum	50
Software / for DP master function / required	Yes, SOFTNET-PB DP
Service / as DP master
DPV0	Yes
DPV1	No
DPV2	No
Number of DP slaves / on DP master / usable	64
Amount of data
of the address area of the inputs / as DP master / overall	7808 byte
of the address area of the outputs / as DP master / overall	7808 byte
of the address area of the inputs / per DP slave	244 byte
of the address area of the outputs / per DP slave	244 byte
of the address area of the diagnostic data / per DP slave	244 byte
Service / as DP slave
DPV0	Yes
DPV1	No
Amount of data
of the address area of the inputs / as DP slave / overall	122 byte
of the address area of the outputs / as DP slave / overall	122 byte
Number of possible connections / for S7/PG communication / maximum	8
Number of configurable connections / per PC station	207
Configuration software / required	NCM PC is included in scope of delivery of the required software product
Product function / Port diagnostics	Yes
Standards, specifications, approvals
Standard
for EMC	2004/108/EC
for safety / of CSA and UL	CAN/CSA C22.2 & UL 60950-1
for emitted interference	EN 61000-6-3, EN 61000-6-4
for interference immunity	EN 61000-6-1, EN 61000-6-2
Verification of suitability
CE mark	Yes
C-Tick	Yes

This adapter is compatible with Siemens PC Adapter and HMI adapter,fully support  RS232 port of PC and HMI to PROFIBUS/MPI communication, use the Siemens special protocol processing chip,it can be used for Siemens S7-300/400 series PLC and other equipments with PROFIBUS/MPI interface. RS232-RS485-power supply are all optical isolated, especially suitable for the strong interference and communication interface easily damaged industrial scene.

It is 100% compatible with Siemens original part.

Part#: PC Adapter CN

EX-Work Price: $286.00/pc       

Approx. Weight: 0.3Kg
Manufacturer: Kollewin
Warranty: 1 year
Origin: China

User's manual PDF of PC Adapter CN:

PC Adapter CN USER MANUAL

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products

PC Adapter CN is a high-tech adapter compatible with Siemens PC Adapter and HMI Adapter,fully support RS232 serial port of PC and HMI to PROFIBUS/MPI communication, adopt the Siemens protocol processor chip,no functional defects. PC Adapter CN is the opto-isolated adapter for industrial design.It has the surge protection and anti-lightning protection circuit on the RS232 interface and RS485 interface, support hot plug, is suitable for Siemens S7-300/400 series PLC and other equipments with PROFIBUS/MPI interface. In particular, it applies to the strong interfere industrial situations and the safeguard in the circuit guarantees the safely running of the system.
PC Adapter CN can communicate between S7-300/400PLC and RS232 interface of third party HMI,can replace the Siemens HMI Adapter.

The low version PC/MPI+ didn’t adopt the Siemens protocol processor chip,but adopt the MCU and use the software to achieve the profibus protocol,the protocol is not perfect and has the defect,only support MPI communication,not support profibus communication,can only connect few HMI and have the defect. When there are many nodes or third-party device in the network,it can’t identify every node. At the same time, it may have the risk that PC/MPI+ can’t be used after the PLC internal program is upgraded in the future.
Main Technical Specifications:

The network type and baud rate which PC Adapter CN supports:

RS232 serial port baud rate which PC Adapter CN supports:

Note:You only can choose 19.2Kbps and 38.4Kbps baud rate in the STEP7 software,if you need to use other baud rates,it needs the tool software.

The following is the comparison between PC Adapter CN and other similar products:

● RS232 interface can connect PC or HMI etc third party devices,baud rate 9.6Kbps～115.2Kbps automatically adjust.
● Support PROFIBUS and MPI communication, auto bus protocol test,largest baud rate 1.5Mbps.
● Power supply from PLC port,24VDC, Power Consumption 2W,with over current and surge protection.
● Power-RS485-RS232 all isolated
● Opto-isolated voltage 1000VDC.
● RS232 interface has the anti-surging protection
● RS485 interface has the anti-lightning and surging protector, Repeatability surge capacity: Ipp=100A(10/700us，4KV),meet the standard ITU-TK20/21、VDE 0433. ±15KV ESD protection.
● Need additional 24VDC power for the long distance communication, the largest cable length meets the profibus standard.
● With the power indicator, data sending indicator, data receiving indicator
Can install the adapter on the S7-300/400PLC rail or 35MM standard rail.
● Shape Size: 123mm×68mm×30mm(Length*Width*Height),with the mounting bracket
● Working Temperature: -20～+75℃

We also have other compatible PLC Programming cables of Siemens

CP5611

CP5611-A2

CP5512

CP5512EXP-NEW

PC Adapter CN-NEW

ES-ETH-PPI-NEW

ETH Adapter CN-NEW

USB/PPIM+

PC/PPI

PC/PPI+

USB/MPI+ V4.0

USB/MPI+ V2.0

PC/MPI+ including RS232 cable

PC/MPI

LOGO!USB-CABLE

LOGO!PC-CABLE

MPI extension cable

PC/TTY

Here, more pictures of our compatible cables of Siemens parts

Of course, we also supply some other brands compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

ES-ETH-SC09-NEW

FX-USB-AW

USB-SC09

USB-SC09-FX

SC-09+

SC-10

USB-QC30R2

FX2N-485-BD+

FX2N-485-BD

FX2N-422-BD

FX2N-232-BD

FX1N-485-BD

FX1N-422-BD

FX3U-485-BD

FX3U-422-BD

FX3U-232-BD

FX3U-USB-BD

1747-PIC

1747-UIC

1747-CP3

USB-1747-CP3 

1761-CBL-PM02

USB-1761-CBL-PM02

Pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy